• Title/Summary/Keyword: hand length

Search Result 1,103, Processing Time 0.027 seconds

A Study on Establishment of Glove Size System and Hand Shape (손 형태의 특징 및 장갑의 치수 설정에 관한 연구)

  • Kwon Myoungsook;Choi Insoon;Chung Gisoo;Yang Minjae
    • Journal of the Korean Society of Costume
    • /
    • v.55 no.6 s.96
    • /
    • pp.24-37
    • /
    • 2005
  • This study was performed to get basic data for gloves size system and pattern planning suitable Korean hand shape. Data was collected through measuring hand size of man and woman from age 18 to 30 as subjects living in metropolitan area. by analysing the measured data, the difference in man and woman and the gloves size system was established. The results of study are as follows: 1. The Deviation of hand girths and hand lengths was larger than that of hand width in both man group and woman group. In all items. deviation in man was larger than woman. 2. In sex difference, there was difference between mall group and woman group in all items. In age difference, there was difference between mall group and woman group in mainly girth and the difference was bigger in group under 24 years old than in group over 24 years old. 3. The weight showed the highest $correlation(r{\geqq}0.8)$ with girths and high correlation with widths $(r{\geqq}0.7).$ The height showed the highest positive $correlation(r{\geqq}0.8)$ with and elbow length and high correlations with width and girths item. There were high positive correlation between vertical lengths in hand and between horizontal lengths but low correlation between vertical lengths and horizontal lengths. 4. The basic parts for gloves size system, hand lengths and hand girths were divided into 1cm interval. The results shouted that $91.0\%$ of man group were ranged from 18cm to 20cm section and $92.4\%$, of woman group were ranged from 16cm to 18cm section. 5. The interval which has the highest covet· rate was hand length 19cm and hand girth 20cm interval which covered $18.65\%$ of man group. The intervals which showed cover rate more than $5\%$ was total 7 and they covered $73.1\%$ of man group. The interval which has which has the highest cover rate was hand length 17cm and hand girth 17cm interval which covered $21.37\%$ of woman group. The intervals which showed cover rate more than $5\%$ was total 6 and they covered $72.5\%$ of total woman group.

Evaluation of Glove Designs Applying Change in Hand Length Dimensions by Hand Motion (손동작에 따른 손체표 길이 변화를 적용한 장갑 설계 평가)

  • Kwon, O-Chae;Sun, Mee-Sun;Jung, Ki-Hyo;Lee, Min-Jeong;Yeon, Soo-Min;You, Hee-Cheon;Kim, Hee-Eun
    • Journal of the Ergonomics Society of Korea
    • /
    • v.24 no.4
    • /
    • pp.15-21
    • /
    • 2005
  • Use of a glove made of materials with a low elasticity decreases the performance of the hand such as agility, dexterity, range of motion, and grip strength. The present study examined if the adverse effects of a low-elastic glove can be reduced by a design which accommodates the changes of hand surface lengths by hand motion. Two glove designs which provide patches of elastic cloth and pleats at the finger joints and knuckle were developed by considering the hand surface length changes, and then compared with two conditions(bare hand and conventional glove design that does not consider the dynamic characteristics of the hand dimensions) in terms of completion time in peg board insertion task, maximum grip strength, discomfort in hand motion, discomfort in force exertion, and overall discomfort by 24 right-handed participants. The test results confirmed that wearing of a glove significantly reduced the agility and grip strength capability of the hand and indicated that the novel designs were effective to lessen the performance decreases compared to the conventional design. Also, of the glove designs, the pleat glove design was found most preferred for both better hand performance and less subjective discomfort.

Therapeutic Effects of Low-Level Laser Combined with LED on Post-operative Hand

  • Jeong-Sun Lee;Hwa-Kyung Shin
    • The Journal of Korean Physical Therapy
    • /
    • v.36 no.1
    • /
    • pp.14-20
    • /
    • 2024
  • Purpose: This study was performed to identify and investigate the therapeutic effects of low-level laser (LLL) combined with a light-emitting diode (LED) on post-operative wound healing and functional recovery after hand orthopedic surgery. Methods: The study subjects were twenty patients who had passed the acute inflammatory phase after hand orthopedic surgery and were assigned equally to an experimental or a control group. Phototherapy was administered three times weekly for two weeks. Changes in wound length, edema, pain, and hand function were measured. Results: Significant differences in wound length, edema, pain, and hand function were observed between the experimental and control groups (p<0.05). However, no significant intergroup difference was observed (p>0.05). Nonetheless, a comparison of results showed changes in the experiment group over the two-week study period were significantly greater than in the control group (p<0.05). Conclusion: These findings show that combined LLL plus LED phototherapy positively influences post-operative hand rehabilitation.

Determination and Application of Key Dimensions for a Sizing System of Glove by Analyzing the Relationshiops Between Hand Anthropometric Variables (손측정변수들 간의 연관성 분석을 통한 장갑설계의 중요변수 결정 및 치수체계 적용)

  • Gwon, O-Chae;Jeong, Gi-Hyo;Seon, Mi-Seon;Yu, Hui-Cheon;Kim, Hui-Eun
    • Journal of the Ergonomics Society of Korea
    • /
    • v.23 no.3
    • /
    • pp.25-38
    • /
    • 2004
  • Selection of a key dimension (s) by considering the characteristics of hand dimensions is needed to design gloves and construct a sound sizing system for gloves The present study identified key dimensions of glove design by analyzing the relationships between hand dimensions and demonstrated the construction process of a glove sizing system. By conducting correlation and regression analyses on 70 hand dimensions including 3 key dimension candidates (hand length; hand circumference; hand breadth) with the 1988 US Army data, hand length and hand circumference were selected as key dimensions for glove design. Glove sizing systems were constructed for males and females by applying the selected key dimensions, 0.5 inch of sizing intervals, and 2% of presence rate criterion to the US Army data. This study suggests that glove sizing systems for males and females be very different from each other and a glove sizing system for males include more sizes than that for females.

Change of working length in curved canals by various instrumentation techniques (만곡근관에서 근관형성법에 따른 근관작업장의 변화)

  • Jo, Jeong-Im;Jin, Myoung-Uk;Kim, Young-Kyung;Kim, Sung-Kyo
    • Restorative Dentistry and Endodontics
    • /
    • v.31 no.1
    • /
    • pp.30-35
    • /
    • 2006
  • To evaluate the change of working length with various instrumentation techniques in curved canals, working length and canal curvature were determined before and after canal instrumentation in buccal or mesial canals of extracted human molars. Stainless steel K-files ($MANI^{(R)}$, Matsutani Seisakusho Co. Takanezawa, Japan), nickel-titanium K-files (Naviflex $NT^{TM}$, Brassier, Savannah, USA) , $ProFile^{(R)}$, and ProTaper (Dentsply-Maillefer, Ballaigues, Switzerland) were used to prepare the canals with crown-down technique. In two hand instrumentation groups coronal flaring was made with Gates Glidden burs. Apical canals were instrumented until apical diameter had attained a size of 30. Positional relation between the tooth apex and the $\#10$ K-file tip was examined by using AutoCAD 2000 (Autodesk Corp., San Rafael. CA, USA) under a stereomicroscope before and after coronal flaring, and after apical instrumentation. Degree of canal curvature was also measured with Schneider's method in radiographs. Data of working length and canal curvature changes were statistically analyzed with one-way ANOVA and Tukey's studentized range test. Working length and canal curvature were decreased significantly in each step in all instrumentation groups. Coronal flaring using Cates Glidden burs in hand instrument groups and whole canal instrumentation using stainless steel hand K-files caused significantly more working length change than in ProFile instrumentation group (p<0.05). The result of this study demonstrates that all of the above kinds of instrumentation in curved canals cause reduction of working length and canal curvature at each instrumentation steps, and hand instrumentation causes more working length change than ProFile.

A Kinematic Analysis of Two Hand Backhand Stroke Swings in Tennis (테니스 양손 백핸드 스트로크 스윙자세의 운동학적 분석)

  • Kang, Sang-Hack;Son, Won-Il
    • Korean Journal of Applied Biomechanics
    • /
    • v.17 no.1
    • /
    • pp.41-52
    • /
    • 2007
  • The present study analyzed the two hand backhand stroke motion of six female high school tennis players who won the championship at the National Athletic Meeting in 2006, and drew conclusions as follows. The open angle of the racket at the moment of impact was 90 degree without significant difference among the players, making a wide contact between the ball and the racket. The racket angle was 43 degree at take back and 91 at impact, showing a style of holding the racket rather upright in general. In back swing from the top to the impact, the shoulders and the hips turned by 97 degree and 40 degree, respectively. At the moment of impact, the height of the impact was 54%H, and the position of the impact was 10%H ahead of and 37%H left from the central axis of the body. The right hand made a continental grip and the left hand made a Western or semi Western grip. Through the entire swing motion, the grip angle of the left hand was smaller than that of the right hand, and those who maintained a large grip angle of the right hand at the moment of take back put the racket head slightly farther from the body. In the swing of the racket head from the lowest point to the impact, the vertical length of movement was 11%H and the horizontal length of movement was 60%H, quite long.

Analyzing Hand Geometry to Develop Safety Gloves for Dementia People (치매 환자용 안전 장갑 개발을 위한 손 형태 분석)

  • Sujoung Cha
    • Journal of Fashion Business
    • /
    • v.27 no.3
    • /
    • pp.19-34
    • /
    • 2023
  • The purpose of this study was to analyze the three-dimensional hand-related dimensions of elderly women aged 70 to 84 years and to characterize them to develop safety gloves for dementia patients. The 3D data from the 8th Human Size Survey of the National Institute of Standards and Technology, Size Korea, were analyzed using the SPSS 26.0 program. The straight thumb length was longer in elderly women aged 70-74 than in those aged 80-84. To analyze the hand type of elderly women, four factors were categorized: hand and finger horizontal factor, hand vertical factor, finger digit V thickness factor, and finger length factor. Elderly women's hand types were categorized as 'long hands and thin fingers', 'thick hands with long fingers', and 'short hands and thick little fingers'. Elderly women aged 70-74 years and 80-84 years were analyzed as having the most 'long hands and thin fingers' type, while older women aged 75-79 years were analyzed as having the most 'thick hands and long fingers' type. It is known that the fingers get thicker and the size of hands increase as age advances, but by the age 80, there is a change in the size of hands again. In future research, it would be worth expanding to other age groups to explore differences between age groups and to develop safety gloves for real-world dementia patients based on the hand types analyzed.

The Application of TW3 method for Prediction about Bone Age in Hand AP Image of Children (소아 Hand AP영상에서 골연령 예측을 위한 TW3법의 응용)

  • Lee, Jinsoo
    • Journal of the Korean Society of Radiology
    • /
    • v.9 no.6
    • /
    • pp.349-356
    • /
    • 2015
  • The study is to recognize the interactions with bone ages by measuring the length between the end of the bone and the growth plate on selected highest weight of regions of seven for bone maturity in TW3 method. The experiment is subjected on seventy-two children (36 males, 36 females) who have examined the growth plate test from March, 2014 to March, 2015 and implemented a regression analysis by measuring the length between the end of the bone and the growth plate in Hand AP image of the children. In result, each bone age has produced a mean value and a standard deviation corresponding to the specific range and as bone age increases the length between the end of the bone and the growth plate decreased. In addition, female children showed lower mean value in comparison to male and also the measurement of the length between the end of the bone and the growth plate and its bone age are shown to be statistically valid(p<0.001) according to the results of regression analysis using its result value. Therefore, the probability of prediction on the bone age read off through the applied TW3 method and regression equation in the Hand AP image of the children.

Orientation properties of Korean traditional paper-Hanji (전통한지의 종이 방향성)

  • Yoon, Seung-Lak;Ra, Jong-Bum
    • Journal of Korea Technical Association of The Pulp and Paper Industry
    • /
    • v.45 no.3
    • /
    • pp.52-58
    • /
    • 2013
  • To evaluate the anisotropic characteristics of Korean traditional paper-Hanji, the physical and mechanical characteristics of hand-made hanji, and machine-made hanji were investigated in this research. The densities of copying paper and newsprint paper appeared to be two times higher than the densities of hand-made hanji using Ssangbal sheet forming and hanji made of paper mulberry fiber. The breaking length, and tear index of both Hanji using Owangbal sheet forming, and hand-made Hanji using Ssangbal sheet forming appeared to be different according to the directions in paper. The breaking lengths of Hanji using Owangbal sheet forming showed little differences according to the directions. Breaking length of Hanji using Ssangbal sheet were slightly higher than those of Hanji using Owangbla sheet forming. The breaking lengths of machine-made hanji, copying paper, and newsprint paper were two to four times higher than those of hand-made Hanji. The breaking length showed higher differences according to the direction than the tear index. The tensile strength according to the directions in paper showed significant differences (${\alpha}$=0.05) in all papers used in this research.

Total Urethra and Penile Shaft Reconstruction with Combined Pedicled Anterolateral Thigh Flap and Radial Forearm Free Flap after Total Penectomy

  • di Summa, Pietro Giovanni;Sapino, Gianluca;Bauquis, Olivier
    • Archives of Plastic Surgery
    • /
    • v.49 no.3
    • /
    • pp.448-452
    • /
    • 2022
  • Total reconstruction of the penis (TPR) represents a challenge for urologists and plastic surgeons, especially when urethral length is severely reduced. We here describe, for the first time in an oncologic scenario, a double flap phalloplasty using a pedicled anterolateral thigh (ALT) flap for penile reconstruction and a radial forearm free flap (RFFF) for complete neourethra and glans reconstruction following penile amputation. A 48-year-old patient came to our department following a total penectomy with inferior urethral derivation. The indication for a double flap phalloplasty was posed as only way to fully reconstruct the urethra on its length avoiding possible complications of single flap reconstruction using tube-into-tube technique. Both flaps healed uneventfully with no neourethral strictures or fistulas described. At 18 months follow-up, the patient was extremely satisfied with the aesthetic result and was able to void in standing position. We think that a double free tissue transfer for TPR should be considered, particularly when a urethral length > 14 cm needs to be reconstructed. While the pedicled ALT can be used to reconstruct a proper penile shaft with an easily concealed scar, the RFFF can provide adequate neourethra length with satisfactory sensory recovery at the neoglans.