• Journal of Power Electronics
• /
• 제18권3호
• /
• pp.892-901
• /
• 2018

SiC MOSFETs have been used to improve system efficiency in high frequency converters due to their extremely high switching speed. However, this can result in undesirable parasitic oscillations in practical systems. In this paper, models of the key components are introduced first. Then, theoretical formulas are derived to calculate the switching oscillation frequencies after full turn-on and turn-off in clamped inductive circuits. Analysis indicates that the turn-on oscillation frequency depends on the power loop parasitic inductance and parasitic capacitances of the freewheeling diode and load inductor. On the other hand, the turn-off oscillation frequency is found to be determined by the output parasitic capacitance of the SiC MOSFET and power loop parasitic inductance. Moreover, the shifting regularity of the turn-off maximum peak voltage with a varying switching speed is investigated on the basis of time domain simulation. The distortion of the turn-on current is theoretically analyzed. Finally, experimental results verifying the above calculations and analyses are presented.

• 한국자기학회지
• /
• 제27권4호
• /
• pp.140-144
• /
• 2017

Co 원자 4개를 포함한 cubane 구조의 분자자성체의 전자구조 및 자기적 성질을 제1원리의 범밀도함수법을 이용하여 계산하였다. 계산된 결과, Co 원자는 +2가를 가지며, 강한 내부 원자의 교환상호작용으로 high-spin 상태를 보여주었다. 스핀배열에 따른 총 에너지 계산에서 수직을 이루는 Co 원자 사이는 강자성, 더 큰 각도를 이루는 Co 원자 사이는 반강자성 교환상호작용이 일어남을 보여주었다. 이러한 원인은 $Co^{+2}(3d^7)$ 원자 사이의 초교환상호작용으로 설명할 수 있었었고, Co 분자자성체는 AFM1 = [${\uparrow}{\uparrow}{\downarrow}{\downarrow}$] 스핀구조를 가지고 있었다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 춘계학술발표회 초록집
• /
• pp.97-97
• /
• 1999

Dross formation in the zinc bath is inevitable under any condition as long as coating process on steel strip continues. Thus, bath aluminum and temperature are precisely managed to suppress the increase of dross. Also, excessive dross for normal coating process is generally eliminated physically by bubbling and skimming. Total amount of dross in the bath can be sometimes high enough to cause coating defect. On the other hand, local concentration of dross can make coating defect even with satisfactory level of total amount of dross. Reduction of dross in the bath was attempted by using ceramic foam filter made of mainly alumina. Dross in molten zinc was almost reduced to the levels of solubility of iron and aluminum in molten zinc at $450~460^{\circ}C$. Their solubility levels were confirmed by thermodynamic calculations or DEAL program. Two kinds of filters were tested for dross reduction. One was #20 ppi, porous per inch, and the other #30 ppi filter. Both were effective in reducing the bath dross to the solubility levels at the static state. Bath iron was reduced by 24 wt% and 19 wt% with #20 filter, and by 35 wt% and 29 wt% with #30 filter for GI and GA pot, respectively. Also, ceramic foam filter did not make any harm to the zinc bath composition after filtering test.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1222-1235
• /
• 2004

This study examines the influence of geometry on the internal flow and macroscopic behavior of the spray in Diesel nozzles. For this investigation, two bi-orifice nozzles were employed: one cylindrical and one conical. The first step is to use a non-destructive characterization method which is based on the production of silicone moulds so that the precise internal geometry of the two nozzles can be measured. At this stage the nozzles have been characterized dimensionally and therefore the internal flow can be studied using CFD calculations. The results gained from this experiment make it possible also to ascertain the critical cavitation conditions. Once the critical cavitation conditions have been identified, the macroscopic parameters of the spray can be studied in both cavitating and non-cavitating conditions using a test rig pressurized with nitrogen and with the help of a image acquisition system and image processing software. Consequently, research can be carried out to determine the influence that cavitation has on macroscopic spray behavior. From the point of view of the spray macroscopic behavior, the main conclusion of the paper is that cavitation leads to an increment of the spray cone angle. On the other hand, from the point of view of the internal flow, the hole outlet velocity increases when cavitation appears. This phenomenon can be explained by the reduction in the cross section of the liquid phase in the outlet section of the hole.

• 한국통신학회논문지
• /
• 제18권4호
• /
• pp.561-571
• /
• 1993

본 논문에서는 새로운 이산 심볼동기(STR) 알고리듬을 제안한다. 최적 추정이론에서 파생된 이 알고리듬은 기존의 알고리듬에 대한 이해와 분석을 바탕으로 장단점을 소화한 것이다. 새로운 알고리듬의 타이밍(timing) detector는 구현이 간단하며 반송파 위상에 독립적으로 동작하므로 Symbol Timing Recovery (STR)의 새로운 추세인 Carrier Recovery(CR)-STR의 연동동작이 가능하다. 한편 새로운 알고리듬에서 비선형소자에 의한 영향도 분석되고 설명되었으며 수치해석과 Monte-Carlo 시뮬레이션으로 기존의 알고리듬과 제안된 알고리듬간의 성능분석을 수행하였다. Gardner 알고리듬과 비교하였을 때 본 알고리듬은 작은 rolloff에서 패턴 지터(Pattern Jitter)에 의한 추적성능이 보다 우수하였다.

• 전기학회논문지
• /
• 제65권8호
• /
• pp.1376-1382
• /
• 2016

The discharge characteristics of inductively coupled $Ar/CH_4$ plasma were investigated by fluid simulation. The inductively coupled plasma source driven by 13.56 Mhz was prepared. Properties of $Ar/CH_4$ plasma source are investigated by fluid simulation including Navier-Stokes equations. The schematics diagram of inductively coupled plasma was designed as the two dimensional axial symmetry structure. Sixty six kinds of chemical reactions were used in plasma simulation. And the Lennard Jones parameter and the ion mobility for each ion were used in the calculations. Velocity magnitude, dynamic viscosity and kinetic viscosity were investigated by using the fluid equations. $Ar/CH_4$ plasma simulation results showed that the number of hydrocarbon radical is lowest at the vicinity of gas feeding line due to high flow velocity. When the input power density was supplied as $0.07W/cm^3$, CH radical density qualitatively follows the electron density distribution. On the other hand, central region of the chamber become deficient in CH3 radical due to high dissociation rate accompanied with high electron density.

• 응용통계연구
• /
• 제6권2호
• /
• pp.393-399
• /
• 1993

반응이 두 가지로 나타나는 자료에서 설명변수와 반응변수와의 관계를 연구할 때 많이 사용되는 로지스틱 회귀모형에 대하여 그 모수들을 최우추정법으로 구할 때 추정량의 표준오차는 보통 로그우도함수의 2차도함수에 바탕을 두어 계산하게 된다. 한편 피셔정보량이 로그우도함수의 1차도함수를 제곱한 통계량의 기대값으로도 계산된다는 점에 착안하여 얻어지는 피셔정보량의 추정량도 이와 거의 비슷한 대표본 성질을 갖는 것으로 알려져 있다. 이러한 피셔정보량의 추정량들은 최우추정량을 구할 때의 반복 알고리즘과 깊은 관련을 갖고 있다. 어느 방법이 더 효과적으로 최우추정량을 계산하는 지 평균반복횟수를 비교하고 대표본분산의 추정량으로서 각 방법에서 계산되는 분산의 추정량들을 비교하였다.

• Structural Engineering and Mechanics
• /
• 제71권3호
• /
• pp.317-327
• /
• 2019

The aim of this paper is to present the most important issues on the implementation, operation and maintenance of foundation for machines. The article presents the newest solutions both in terms of technology implementation as well as materials used in construction of such structures. Foundations for machines are special building structures used to transfer loads from an operating machine to the subsoil. The purpose of these foundations is not just to transfer loads, but also to reduce vibrations occurring during operation of the machine, i.e. their damping and preventing redistribution to other elements of the building. It should be noted that foundations for machines (particularly foundations for hammers) are the most dynamically loaded building structures. For these reasons, they require precise static and dynamic calculations, accuracy in their implementation and care for them after they have been made. Therefore, the paper in detail present the guidelines regarding: design, construction and maintenance of structures of this type. Furthermore, the most important parameters and characteristics of materials used for the construction of these foundations are described. As a result of the conducted analyzes, it was found that the concrete mix, in foundations for machines, should have a low water/binder ratio. For its execution, it is necessary to use broken aggregates from igneous rocks and binders modified with mineral additives and chemical admixtures. On the other hand, the reinforcement of composites should contain a large amount of structural reinforcement to prevent shrinkage cracks.

• Steel and Composite Structures
• /
• 제46권1호
• /
• pp.15-31
• /
• 2023

Organic solar cells utilized natural polymers to convert solar energy to electricity. The demands for green energy production and less disposal of toxic materials make them one of the interesting candidates for replacing conventional solar cells. However, the different aspects of their properties including mechanical strength and stability are not well recognized. Therefore, in the present study, we aim to explore the chaotic responses of these organic solar cells. In doing so, a specific type of organic solar cell constructed from layers of material with different thicknesses is considered to obtain vibrational and chaotic responses under different boundaries and initial conditions. A square plate structure is examined with first-order shear deformation theory to acquire the displacement field in the laminated structure. The bounding between different layers is considered to be perfect with no sliding and separation. On the other hand, nonlocal elasticity theory is engaged in incorporating the structural effects of the organic material into calculations. Hamilton's principle is adopted to obtain governing equations with regard to boundary conditions and mechanical loadings. The extracted equations of motion were solved using the perturbation method and differential quadrature approach. The results demonstrated the significant effect of relative glass layer thickness on the chaotic behavior of the structure with higher relative thickness leading to less chaotic responses. Moreover, a comprehensive parameter study is presented to examine the effects of nonlocality and relative thicknesses on the natural frequency of square organic solar cell structure.

• 한국해양공학회지
• /
• 제38권1호
• /
• pp.1-9
• /
• 2024

The vertical center of gravity (VCG) has a significant impact on the roll motion response of a surface ship, particularly oil tankers based on the oil level in the tanker after discharging oil at several stations or positional changes, such as changes in the superstructure and deck structure. This study examined the motion response of the Korea very large crude carrier 2 (KVLCC2) at various VCGs, especially roll motion when the VCG changed. The potential theory in the Ansys AQWA program was used as a numerical simulation method to calculate the motion response. On the other hand, the calculations obtained through potential theory overestimated the roll amplitudes during resonance and lacked precision. Therefore, roll damping is a necessary parameter that accounts for the viscosity effect by performing an experimental roll decay. The roll decay test estimated the roll damping coefficients for various VCGs using Froude's method. The motion response of the ship in regular waves was evaluated for various VCGs using the estimated roll-damping coefficients. In addition, the reliability of the numerical simulation in motion response was verified with those of the experiment method reported elsewhere. The simulation results showed that the responses of the surge, sway, heave, pitch, and yaw motion were not affected by changing the VCG, but the natural frequency and magnitude of the peak value of the roll motion response varied with the VCG.