• Journal of architectural history
• /
• v.8 no.4 s.21
• /
• pp.129-146
• /
• 1999

The Purpose of this Study is to find the Modern Movements which had done important roles on the development of modern church architecture and sacred art in the first half of 20th century. I had investigated the background and process of the movements, and analyzed the buildings which represented the movements. And I compared the architectural fruits of 'Riturgical Movement' and 'L' art $Sacr\'{e}$ Movement. The results are summarized as follows : First, there are two important movements in Catholic church in the backgrounds of the innovative changes of modern church architecture, Those are 'Riturgical Movement' which pursuits to establish a closer relation between clergy and congregation, and to make the positive participants in the service not mere observers and 'L' art $Sacr\'{e}$ Movement' which pursuits to accept modern secular art into church. Second, both movements had been developed on the bases of the theological studies with tow monasteries - Benedictine Order and Dominican Order - as leader. And the main concept was a kind of revival movement which recovers the Christian tradition. Third, The two movements began from the different themes and in the different regions. But they exerted influences each other, and achieved successful fruits in the Catholic churches of England and Swiss in 1960'. Fourth, 'Riturigical reformation' and 'Acceptance of modern art' had been officialized and generalized through the second Vatican Council(1962-1965).

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.1-12
• /
• 1979

This article is a sequel to " Korean Character Processing: Part I. Theoretical Foundation " and deals with the practical and historical aspects of the same subject. We discuss , in the first half, the functional design of Korean I/O terminals, Korean character generators based on the conversion algorithm and dot matrix fonts, input keyboard configuration ( trade -offs between a key set and the number of key -strokes ), and the conditions to be considered for binary code design. The second half of the article is devoted to the history of Korean Character processing which is seen from the personal viewpoints. The recorded works are classified into 4 groups according to their maj or contents. Then we bring up each problematic issue to give a critical review of articles . Issues related to output (conversion process) and input ( character recognition) are separated. The bibliography is given in a chronological order.cal order.

• Structural Engineering and Mechanics
• /
• v.56 no.3
• /
• pp.491-506
• /
• 2015

Propagation of the generalized Rayleigh waves in an initially stressed elastic half-space covered by an elastic layer is investigated. It is assumed that the initial stresses are caused by the uniformly distributed normal compressional forces acting on the face surface of the covering layer. Two different cases where the compressional forces are "dead" and "follower" forces are considered. Three-dimensional linearized theory of elastic waves in initially stressed bodies in plane-strain state is employed and the elasticity relations of the materials of the constituents are described through the Murnaghan potential where the influence of the third order elastic constants is taken into consideration. The dispersion equation is derived and an algorithm is developed for numerical solution to this equation. Numerical results for the dispersion of the generalized Rayleigh waves on the influence of the initial stresses and on the influence of the character of the external compressional forces are presented and discussed. These investigations provide some theoretical foundations for study of the near-surface waves propagating in layered mechanical systems with a liquid upper layer, study of the structure of the soil of the bottom of the oceans or of the seas and study of the behavior of seismic surface waves propagating under the bottom of the oceans.

• Polymer(Korea)
• /
• v.24 no.2
• /
• pp.159-167
• /
• 2000

The polymethylene-bridged dinuclear half-titanocenes [(CH$_2$)$_{n}$(C$_{5}$ H$_4$)$_2$][TiCl$_3$]$_2$ (n=5(10), 7(11), 9(12)) have been synthesized by treating the distannylated derivatives of the ligands with two equivalents of TiCl$_4$ in toluene. All complexes are characterized by IR, $^1$H NMR, $^{13}$ C NMR and mass spectrometry. In order to examine the catalytic properties of the dinuclear complexes styrene polymerization has been conducted in the presence of MMAO. From the polymerization experiments it was found that ( i ) all the prepared complexes 10-12 produced syndiotactic polystyrenes, ( ii ) the complex 12 holding the longest bridging ligand exhibited the highest activity but produced a polymer having the smallest molecular weight among the polymethylene-bridged dinuclear half-titanocenes. This behavior was attributed to the influence of electron-donating caused by the polymethylene bridge between two active centers as well as the effect of steric congestion around metal center caused by the proximal distance between two active sites.s.

• Polymer(Korea)
• /
• v.30 no.1
• /
• pp.64-69
• /
• 2006

A series of dinuclear half-sandwich titanium complexes with aryloxy substituent at titanium$[(\eta^5-cyclopentadienyl)(aryloxy)TiCl_2]_2[(CH_2)_n]$ (n=3, n=6, n=9) have been successfully synthesized and their styrene polymerization properties have been investigated. All complexes are characterized by $^1H\;NMR,\;^{13}C\;NMR$, elemental analysis, and mass spectrometry. In order to examine the catalytic properties of the dinuclear complexes styrene polymerization has beer conducted in the presence of MMAO. It was found that (i) all the prepared complexes were very effective catalyst for the production of SPS (syndiotactic polystyrene), (ii) the complex with the longest bridge between the two active sites exhibited greatest catalytic activity among the three catalysts, but produced SPS with the smallest molecular weight, (iii) the activities of dinuclear half-titanocens with aryloxy substitution at titanium metal were greater than those of the chloride substituted compounds. These results indicate that not only the nature of the bridge between the two active sites but also the property of substituents at the metal exert a significant influence on the polymerization behaviors of the dinuclear half-titanocene.

• Journal of the Semiconductor & Display Technology
• /
• v.4 no.4 s.13
• /
• pp.19-26
• /
• 2005

The process optimization of ozone concentration and half life time was investigated in ultra pure water and alkaline solutions for the wet cleaning of silicon wafer surface at room temperature. In the ultra pure water,. the maximum concentration (35 ppm) of ozone was measured at oxygen flow rate of 3 liters/min and ozone generator power over 60%. The half life time of ozone increased at lower power of ozone generator. Additive gases such as $N_2$ and $CO_2$ were added to increase the concentration and half life time of ozone. Although the maximum ozone concentration was higher with the addition of $N_2$ gas, a longer half life time was observed with the addition of $CO_2$. When $NH_4OH$ of 0.05 or 0.10 vol% was added in DI water, the pH of the solution was around 10. The addition of ozone resulted in the half life time less than 1 min. In order to maintain high pH and ozone concentration, ozone was continuously supplied in 0.05 vol% ammonia solutions. 3 ppm of ozone was dissolved in ammonia solutions. The static contact angle of silicon wafer surface became hydrophilic. The particle removal was possible alkaline ozone solutions. The organic contamination can be removed by ozonated ultra pure water and then alkaline solution containing ozone can remove the particles on silicon surface at room temperature.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.253-258
• /
• 1993

In this paper, we propose a new method to extract the line spectrum pair (LSP) frequencies. When speech signal is analyzed by the autocorrelation method, the spectral difference in the logarithmic spectra of the model at steps p and p-1 oscillates. There are p-1 frequency points where the values of the spectral dfference take on either maximum or minimum between 0 and half sampling frequency. We show that these frequencies are excatly the LSP frequencies of order p-1, which can be found by searching the frequencies where the spectral difference reaches either maxima or minima. also, the LSP frequencies of order p can be obtained from this spectral difference. In this case, we derive the expression governing the pth order LSP frequencies. The efficient search for finding the LSP frequencies of order p can be done by proving the property that the LSP frequencies of order p and p-1 are interlaced with each other.

• The Journal of the Korea Contents Association
• /
• v.3 no.3
• /
• pp.34-39
• /
• 2003

In the 21n century, the internet order system half been developed to maintain convenience along with the development of the high speed internet networks. food order system in any place and at any time we developed internet oder systems that uses the wireless internet terminals(PDA, Pocket PC, etc) or the PC based on CTI system. This paper presents the design and implementation of the internet food order system.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.65-75
• /
• 1996

The probability distributio function (pdf) of transmitted symbols should be asymmectric for recovering the received data in the 3rd order blind equalizer system. In this paper, we hav edesigned the blind equalizer using symmetric-asymmetric (SA) and asymmetric-symmetric (AS) transforms for less computational complexities and robustness in the noisy environments. The method of SA and AS transform was peformed using natural logarithmic operation. This paper proves that the proposed in this paper can be performed as real time operation. This paper proves that the compression factor k has no effet on transmitted symbols. Also 3rd order equalization method proposed in this paper can be performed as real time operation. As a result of computer simulatio, the computational complexity of proposed algorithm is reduced to be an half of 4th order method and MSE is enhanced as 10dB at the case of 4-PAM and 15dB at the case of 8-PAM respectivley. Conclusively, we have found that 3rd order blind equalizer can be implemented when the pdf of transmitter is asymmetric.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3098-3103
• /
• 2007

In this paper, natural convection of a magnetic fluids(W-40) in a half circular pipe enclosure are investigated by numerical and experimental method. One side wall is kept at a constant temperature(25$^{\circ}C$), and the opposite side wall is also kept at a constant temperature(20$^{\circ}C$). Under above conditions, various magnitudes of the magnetic fields were applied up. Theoretical study through the governing equation derived by Siliomis is carried out with numerical analysis by the GSMAC Method. And the thermo-sensitive liquid crystal film(R20C5A) is utilized in order to visualize wall-temperature distributions as an experimental method. This study has resulted in the following fact that the natural convection of a magnetic fluids are controlled by the direction and intensity of the magnetic fields.