• Title/Summary/Keyword: half line

Search Result 658, Processing Time 0.03 seconds

Characteristics of the Flux-lock Type Superconducting Fault Current Limiter According to the Iron Core Conditions (자속구속형 초전도 전류제한기의 철심조건에 따른 특성)

  • Nam, Gueng-Hyun;Lee, Na-Young;Choi, Hyo-Sang;Cho, Guem-Bae
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.20 no.7
    • /
    • pp.38-45
    • /
    • 2006
  • The superconducting fault current limiters(SFCLs) provide the effect such as enhancement in power system reliability due to limiting the fault current within a few miliseconds. Among various SFCLs we have developed a flux-lock type SFCL and exploited a special design to effectively reduce the fault current according to properly adjustable magnetic field after the short-circuit test. This SFCL consists of two copper coils wound in parallel on the same iron core and a component using the YBCO thin film connected in series to the secondary copper coil. Meanwhile, operating characteristics can be controlled by adjusting the inductances and the winding directions of the coils. To analyze the operational characteristics, we compared closed-loop with open-loop iron core. When the applied voltage was 200[Vrms] in the additive polarity winding, the peak values of the line current the increased up to 30.71[A] in the closed-loop and 32.01[A] in the open-loop iron core, respectively. On the other hand, in the voltages generated at current limiting elements were 220.14[V] in the closed-loop and 142.73[V] in the opal-loop iron core during first-half cycle after fault instant under the same conditions. We confirmed that the open-loop iron core had lower power burden than in the closed-loop iron core. Consequently, we found that the structure of iron core enabled the flux-lock type SFCL at power system to have the flexibility.

Modeling of Circulation for the East Sea Using Reduced Gravity Models (감쇠중력 모형을 이용한 동해의 순환모델링)

  • Choi, Byung-Ho;Wang, Ou
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.9 no.3
    • /
    • pp.105-114
    • /
    • 1997
  • Wind is one of the main forcing contributing the circulation of the East Sea. By using 1.5-layer and 2.5-layer reduced gravity models, circulation in the East Sea is simulated. The bifurcation of the Tsushima Warm Current (TWC), the separation of East Korea Warm Current (EKWC) from the east coast of Korea, the Nearshore Branch of TWC, and the cyclonic gyres stretched from the East Korea Bay to the northern half of the East Sea are compared well with the schematic map. The features of the upper and the lower layer are very similar except for those of the central region. The Polar Front is the separating line of two different features. The main feature of northern part of the East Sea, north of the Polar Front is cyclonic gyres, which are composed of three cyclonic gyres in most seasons. North Korean Cold Current (NKCC) and Liman Cold Current (LCC) are the nearshore part of these cyclonic gyres. In the south of the Polar Front the current systems of both layers are anticyclonic in most seasons, except that those of the upper layer in winter and spring are not anticyclonic. Along the coast of Korea and Russia, the velocity structure is barotropic, while that of the central region is baroclinic. The effects due to the seasonal variations of wind stress and local Ekman suction/pumping are studied by imposing the domain with modified wind stress. which is spatial mean with temporal variations and temporal mean with spatial variations. It is found that the local Ekman suction/pumping due to wind stress curl is important to the formation of the cyclonic gyres in the western and the northwestern region of the East Sea.

  • PDF

A Study on the Factors affecting Health Education needs of industrial workers (근로자의 보건교육 요구도에 영향을 미치는 요인에 관한 연구)

  • 공득희;이명선
    • Korean Journal of Health Education and Promotion
    • /
    • v.11 no.1
    • /
    • pp.16-32
    • /
    • 1994
  • Health Education is very important not only in school or community fields but also in industrial fields. And health education is most fundamental and enthusiastic area in industrial health. The purpose of this study was to analyze the workers' health education needs and the factors which could affect them. The subjects for this study was 855 workers selected from 57 factories in Inchon. The results were as follows: 1. For demographic variables, sex, age, educational level, and income of the workers were investigated. Most of the workers were males (80.2%). Of the respondents, 30∼39 years old were 41.3%. Approximately 62% of the workers were high school graduates. In additions, those who reported they earned 500,000∼800,000 won monthly were 41.9%. 2. Behavioral characteristics of the workers investigated in this study included smoking, drinking and physical activities. Of the respondents, 55.9% were smoking cigarettes, and 26.8% of the workers reported they drank alcohol once or twice a week. The workers who were taking any form of exercise regularly were 31.6%. 3. Occupational characteristics of the workers included working period working hours a day, medical examination, and so on. About 37.6% of the workers had worked 1∼5 years and 53.6% of the respondents were working less than 8 hours a day. More than half of the workers in this study were taking special medical examination(59.3%) and 59.6% of the respondents were working at the production line in the factories. And most of the respondents (69.0%) were mere members of the staffs. 4. For perceived health status of the respondents, 41.1% answered they were healthy. And for the level of health status, health grade 20.4% of the workers were unhealthy. 5. Health education areas the workers in this study wanted to learn were as follows: 1) Mental health 2) Worksite environment 3) Safety control 4) Disease contol. 6. Those who reported having ever received health education in the factories were 20.9%. 7. Women had more health education needs in personal health care, disease control and family health areas than men. Each age group had different health education needs in all health areas and the differences were significant statistically. 8. The workers who had received special medical examination had more health education needs in worksite environment, safety control, and disease control areas than those who had received general medical examination. The lower the satisfaction of the work and the working environment was, the higher the health education needs of worksite environment area were. 9. For the levels of health status healthy workers were more likely than unhealthy workers to have health education needs in all health areas.

  • PDF

Compensation Characteristics of Distorted Channels in 200 Gbps WDM Systems using Mid-Span Spectral Inversion Method (200 Gbps WDM 시스템에서 Mid-Span Spectral Inversion 기법을 이용한 채널 왜곡의 보상 특성)

  • 이성렬
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.14 no.8
    • /
    • pp.845-854
    • /
    • 2003
  • In this paper, the characteristics of compensation for WDM channel signal distortion due to both chromatic dispersion and Ken effect in 1,000 km 200 Gbps(5${\times}$40 Gbps) WDM systems was investigated. The WDM system has a path-averaged intensity approximation(PAIA) mid-span spectral inversion(MSSI) as a compensation method. This system has a highly nonlinear dispersion shifted fiber(HNL-DSF) optical phase conjugator(OPC) in the mid-way of transmission line. In order to evaluate the degree of compensation, 1 dB eye opening penalty(EOP), bit error rate(BER) characteristics and power penalty of 10$\^$-9/ BER are used. It is confirmed that HNL-DSF is an useful nonlinear medium in OPC fur wideband WDM system with PAIA MSSI and that the optimal compensation for WDM channel distortion is achieved by the selection of pump light power of OPC, which equalize the conjugated light power into the second half fiber section with the input WDM signal light power depending on total transmission length, dispersion coefficient of fiber, OPC pump light wavelength, conversion efficiency of WDM channel in OPC.

Inhibition of L-type Ca2+ current by ginsenoside Rd in rat ventricular myocytes

  • Lu, Cheng;Sun, Zhijun;Wang, Line
    • Journal of Ginseng Research
    • /
    • v.39 no.2
    • /
    • pp.169-177
    • /
    • 2015
  • Background: Ginsenoside Rd (GSRd), one of the most abundant ingredients of Panax ginseng, protects the heart via multiple mechanisms including the inhibition of $Ca^{2+}$ influx.We intended to explore the effects of GSRd on L-type $Ca^{2+}$ current ($I_{Ca,L}$) and define the mechanism of the suppression of $I_{Ca,L}$ by GSRd. Methods: Perforated-patch recording and whole-cell voltage clamp techniques were applied in isolated rat ventricular myocytes. Results: (1) GSRd reduced $I_{Ca,L}$ peak amplitude in a concentration-dependent manner [half-maximal inhibitory concentration $(IC_{50})=32.4{\pm}7.1{\mu}mol/L$] and up-shifted the current-voltage (I-V) curve. (2) GSRd ($30{\mu}mol/L$) significantly changed the steady-state activation curve of $I_{Ca,L}$ ($V_{0.5}:-19.12{\pm}0.68$ vs. $-6.26{\pm}0.38mV$; n = 5, p < 0.05) and slowed down the recovery of $I_{Ca,L}$ from inactivation [the time content (${\zeta}$) from 91 ms to 136 ms, n = 5, p < 0.01]. (3) A more significant inhibitive effect of GSRd ($100{\mu}mol/L$) was identified in perforated-patch recording when compared with whole-cell recording [$65.7{\pm}3.2%$ (n = 10) vs. $31.4{\pm}5.2%$ (n = 5), p < 0.01]. (4) Pertussis toxin ($G_i$ protein inhibitor) completely abolished the $I_{Ca,L}$ inhibition induced by GSRd. There was a significant difference in inhibition potency between the two cyclic adenosine monophosphate elevating agents (isoprenaline and forskolin) prestimulation [$55{\pm}7.8%$ (n = 5) vs. $17.2{\pm}3.5%$ (n = 5), p < 0.01]. (5) 1H-[1,2,4]Oxadiazolo[4,3-a]-quinoxalin-1-one (a guanylate cyclase inhibitor) and N-acetyl-$\small{L}$-cysteine (a nitric oxide scavenger) partly recovered the $I_{Ca,L}$ inhibition induced by GSRd. (6) Phorbol-12-myristate-13-acetate (a protein kinase C activator) and GF109203X (a protein kinase C inhibitor) did not contribute to the inhibition of GSRd. Conclusion: These findings suggest that GSRd could inhibit $I_{Ca,L}$ through pertussis toxin-sensitive G protein ($G_i$) and a nitric oxide-cyclic guanosine monophosphate-dependent mechanism.

Evaluation of Spatial Uniformity about Resolution and Sensitivity of a 'fixed focusing type SPECT' (고정식 초점형 SPECT에 있어, 선예도와 감도의 공간 균일성에 대한 평가)

  • Kim, Jaeil;Lim, Jeongjin;Cho, Seongwook;Noh, Kyeongwoon
    • The Korean Journal of Nuclear Medicine Technology
    • /
    • v.23 no.1
    • /
    • pp.54-58
    • /
    • 2019
  • Purpose At now, there are many kind of dedicated heart SPECT machine in clinical nuclear medicine. Among those, the fixed focusing type SPECT can make a good quality, quantity image because a detectors of this SPECT arranged forward a special ROI and didn't rotate around of body. So, in this paper, we will evaluate a spatial uniformity about resolution and sensitivity at a same plane of a fixed focusing type SPECT. Materials and Methods We used D-SPECT as a fixed focusing type SPECT and Cario MD as a rotated parallel type SPECT to comparing each other. We injected $^{99m}Tc(14.8MBq/1cc)$ to 10 capillary tube (diameter=1mm), and we set those line sources a tfield of view of each SPECT. And then we acquired SPECT date, we applied are construction by recommended methods. By using two tomography images, we calculated a full width of half maximum as a resolution and total counts as a sensitivity, and we compared a CV (coefficientofvariation) values between two images as a spatial uniformity. Results In case of D-SPECT, a CV of resolution and sensitivity are 7.45%, 12.34%. In case of Cario MD, an CV of resolution and sensitivity are 12.49%, 21.84% Conclusion As a results, CV of resolution and sensitivity of a fixed focusing type SPECT is 67.75%, 77.00% higher than ones of a rotated parallel type SPECT. It means that a fixed focusing type SPECT is more uniformed, because this new SPECT can reduce a motion blur artifact by rotating detector around body, also all of detector that made by semiconductor arrange forward a special FOV like heart.

The Effects of Hearing Status on the Quality of Life in the New Middle Age and Elderly (신중년세대와 노인의 청력상태가 삶의 질에 미치는 영향요인)

  • Oh, Ji-Young;Kim, Seok-Hwan;Kim, Han-Sung
    • The Journal of Korean Society for School & Community Health Education
    • /
    • v.20 no.1
    • /
    • pp.1-14
    • /
    • 2019
  • Objectives: There are few studies which reflects of each generation's own features, of the New Middle Age and the Elderly's hearing status and their quality of life even though the population of old age has been weighted as baby boom generation's entering into old age. This study is to identify the effects of the new middle age and the elderly's hearing status on their quality of life and to prepare the customized health policies for their health promotion and quality of life improvement as well as the base line data for hearing enhancement programs. Methods: This study was analyzed using the data of the 7th term of the National Health and Nutrition Survey of the Disease Management headquarters. Out of 8,150 adults over the age of 50 who participated in the hearing test, 3,306 were selected and analyzed. Results: At the result of identifying the correlation of hearing status and the quality of life between the New Middle Age and the Elderly, it was confirmed that hearing loss affects low quality of life. The average of quality of life between the New Middle Age and the Elderly was 0.95 and 0.85 each, resulting in higher quality of life in New Middle Age than in the Elderly. The factors affecting the quality of life of the New Middle Age were the level of the education, household income, the type of health insurance, subjective health status. The factors affecting the quality of life of the Elderly were gender, the type of health insurance, subjective health status. Conclusion: Hearing loss of the New Middle Age and the Elderly affects their low quality of life. Therefore the development and the provision of policy program is needed, so as to maintain and manage hearing through age-specific health education. It is expected that the second half of the New Middle Age's life will be much happier, if not taking the treatment-oriented approach of hearing loss only but strengthening the education needed for the maintenance and the management of healthy hearing at their work place, where 50 and 60 generations' workforce has been increased.

Effect of boron milling on phase formation and critical current density of MgB2 bulk superconductors

  • Kang, M.O.;Joo, J.;Jun, B.H.;Park, S.D.;Kim, C.S.;Kim, C.J.
    • Progress in Superconductivity and Cryogenics
    • /
    • v.21 no.1
    • /
    • pp.18-24
    • /
    • 2019
  • This study was carried out to investigate the effect of milling of boron (B), which is one of raw materials of $MgB_2$, on the critical current density ($J_c$) of $MgB_2$. B powder used in this study is semi-amorphous B (Pavezyum, Turkey, 97% purity, 1 micron). The size of B powder was reduced by planetary milling using $ZrO_2$ balls (a diameter of 2 mm). The B powder and balls with a ratio of 1:20 were charged in a ceramic jar and then the jar was filled with toluene. The milling time was varied from 0 to 8 h. The milled B powders were mixed with Mg powder in the composition of (Mg+2B), and the powder mixtures were uniaxially pressed at 3 tons. The powder compacts were heat-treated at $700^{\circ}C$ for 1 h in flowing argon gas. Powder X-ray diffraction and FWHM (Full width at half maximum) were used to analyze the phase formation and crystallinity of $MgB_2$. The superconducting transition temperature ($T_c$) and $J_c$ of $MgB_2$ were measured using a magnetic property measurement system (MPMS). It was found that $B_2O_3$ was formed by B milling and the subsequent drying process, and the volume fraction of $B_2O_3$ increased as milling time increased. The $T_c$ of $MgB_2$ decreased with increasing milling time, which was explained in terms of the decreased volume fraction of $MgB_2$, the line broadening of $MgB_2$ peaks and the formation of $B_2O_3$. The $J_c$ at 5 K increased with increasing milling time. The $J_c$ increase is more remarkable at the magnetic field higher than 3 T. The $J_c$ at 5 K and 4 T was the highest as $4.37{\times}10^4A/cm^2$ when milling time was 2 h. The $J_c$ at 20 K also increased with increasing milling time. However, The $J_c$ of the samples with the prolonged milling for 6 and 8 h were lower than that of the non-milled sample.

Quality indicators for cervical cancer care in Japan

  • Watanabe, Tomone;Mikami, Mikio;Katabuchi, Hidetaka;Kato, Shingo;Kaneuchi, Masanori;Takahashi, Masahiro;Nakai, Hidekatsu;Nagase, Satoru;Niikura, Hitoshi;Mandai, Masaki;Hirashima, Yasuyuki;Yanai, Hiroyuki;Yamagami, Wataru;Kamitani, Satoru;Higashi, Takahiro
    • Journal of Gynecologic Oncology
    • /
    • v.29 no.6
    • /
    • pp.83.1-83.10
    • /
    • 2018
  • Objective: We aimed to propose a set of quality indicators (QIs) based on the clinical guidelines for cervical cancer treatment published by The Japan Society of Gynecologic Oncology, and to assess adherence to standard-of-care as an index of the quality of care for cervical cancer in Japan. Methods: A panel of clinical experts devised the QIs using a modified Delphi method. Adherence to each QI was evaluated using data from a hospital-based cancer registry of patients diagnosed in 2013, and linked with insurance claims data, between October 1, 2012, and December 31, 2014. All patients who received first-line treatment at the participating facility were included. The QI scores were communicated to participating hospitals, and additional data about the reasons for non-adherence were collected. Results: In total, 297 hospitals participated, and the care provided to 15,163 cervical cancer patients was examined using 10 measurable QIs. The adherence rate ranged from 50.0% for 'cystoscope or proctoscope for stage IVA' to 98.8% for 'chemotherapy using platinum for stage IVB'. Despite the variation in care, hospitals reported clinically valid reasons for more than half of the non-adherent cases. Clinically valid reasons accounted for 75%, 90.9%, 73.4%, 44.5%, and 88.1% of presented non-adherent cases respectively. Conclusion: Our study revealed variations in pattern of care as well as an adherence to standards-of-care across Japan. Further assessment of the causes of variation and non-adherence can help identify areas where improvements are needed in patient care.

The Analysis and Preparation Guideline of Survey for Smart-City -Focused on the Case Study of Geumsan-gun- (스마트시티사업을 위한 설문결과 분석과 추진 방향 -도농복합도시 금산군의 사례-)

  • Nam, Yun-Cheol;Park, Eun-Yeong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.22 no.3
    • /
    • pp.422-428
    • /
    • 2021
  • This study surveyed residents and public officials for the projects to make smart-city plans of Geumsan-gun. First, domestic and foreign cases related to smart city projects were reviewed. The local status of Geumsan-gun was investigated regarding various aspects of the natural, social, urban environment, and smart-city facilities. The survey results were as follows. Overall, more than half of the survey respondents said they were satisfied with their housing quality. Several problems in their areas, such as inefficient welfare system, shortage of parking space, and industrial infrastructure, were reported. On the other hand, tourism and leisure facilities, health care support systems, industries to boost the economy, and the job market were also important issues. The problem was that the regional problems mentioned above were not in line with their preferences for smart-city services. The implications of the survey results could be summed up as follows. The groupware surveys of Geumsan-gun should be used as survey tools, whereas IT survey tools (Google, Survey Monkey, etc.) should be used for locals. In particular, a survey targeting residents should ask plain and compact questions taking advantage of local gatherings. It is also important to have a pilot-survey with relevant public officials and select related projects and regional issues. The survey of local residents and public officials is a prerequisite for promoting smart city projects. The smart city project shall reflect the needs of residents while solving community problems by considering the survey results and local conditions.