• 대한전자공학회논문지TC
• /
• 제44권5호
• /
• pp.7-15
• /
• 2007

무선통신망에서 단일 라디오와 채널의 사용은 무선 노드의 반이중 전송 및 경로의 내부간섭으로 통신망의 처리율 및 단대단 지연 특성을 저하시킨다. 또한, 채널경쟁기반의 무선통신망에서 임의노드 주변에 동일 채널을 경쟁하는 노드가 많으면 경쟁으로 인한 대역폭 감소와 전송 충돌로 인한 지연이 발생하여 통신망의 성능을 저하시킨다. 본 논문에서는 다수 라디오와 채널을 사용하여 무선노드의 전이중전송이 가능하게 하고 경로내부간섭을 배제할 수 있도록 라디오와 채널의 기능을 설정하고 큐잉이론의 해석모델을 이용하여 무선구간의 채널 경쟁 및 충돌을 반영한 무선구간 메트릭 ccf 및 ccf와 함께 채널변경지연, 경로내부간섭을 반영한 경로설정 메트릭 MCCR을 제안한다. MCCR과 MCR을 시뮬레이션을 사용하여 비교하였으며 MCCR을 사용하여 설정한 경로가 MCR보다 통신망 성능을 향상시키는 결과를 얻었다.

• 한국통신학회논문지
• /
• 제18권10호
• /
• pp.1508-1517
• /
• 1993

본 논문에서는 분산 무선망에서 CSMA프로토콜을 사용한 무선통신 시스템을 모델링하고, 컴퓨터로 시뮬레이션을 수행하여 패킷의 도착율(arrival rate) 함수에 의한 평균 END-to-END 지연특성을 살펴보았고, 또 모델링 을 수학적으로도 해석하였다. 이 무선 통신시스템은 단방향 통신방식으로 비동기식 1-persistent CSMA프로토콜을 사용하였으며, 또 모든 무선 통신시스템들이 근거러 영역에 적절하게 위치하고 있다고 가정하였고, 트래픽이 공용채널에 포아송 분포를 이루고 있다고 가정하였다. 이 모델의 해석에서는 무선 통신시스템이 breakdown 특성을 갖는 M/D/1 모델을 기본으로 하였다. 결과적으로 본 논문의 모델에 기초한 무선망은 패킷도착율이 2(packet/sec) 미만인 경우 평균지연시간이 패킷전송시간의 2배정도로 잘 동작됨을 확인할 수 있다.

• ETRI Journal
• /
• 제34권2호
• /
• pp.216-225
• /
• 2012

This paper presents a transceiver module for human body communications whereby a spread signal with a group of 64 Walsh codes is directly transferred through a human body at a chip rate of 32 Mcps. Frequency selective digital transmission moves the signal spectrum over 5 MHz without continuous frequency modulation and increases the immunity to induced interference by the processing gain. A simple receiver structure with no additional analog circuitry for the transmitter has been developed and has a sensitivity of 250 ${\mu}V_{pp}$. The high sensitivity of the receiver makes it possible to communicate between mobile devices using a human body as the transmission medium. It enables half-duplex communication of 2 Mbps within an operating range of up to 170 cm between the ultra-mobile PCs held between fingertips of each hand with a packet error rate of lower than $10^{-6}$. The transceiver module consumes 59 mA with a 3.3 V power supply.

• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.76-80
• /
• 2012

본 논문에서는 릴레이 스테이션에서 에코 제거를 사용하는 새로운 릴레이 시스템을 제안하였다. 제안된 릴레이 시스템에서는 한 심볼을 전송하는데 기존 릴레이 시스템에 비해 절반의 시간 자원만을 필요로 한다. 에코 제거 기법과 제안된 시스템의 프레임 구조를 기술하였으며 제안된 기법은 기존 시스템에 비해 두 배의 용량을 가짐을 모의실험으로 보였다.

• ETRI Journal
• /
• 제46권2호
• /
• pp.175-183
• /
• 2024

Recently, polar code has attracted the attention of many scholars and has been developed as a code technology in coded-cooperative communication. We propose a polar code scheme based on Plotkin structure and quasi-uniform punching (PC-QUP). Then we apply the PC-QUP to coded-cooperative scenario and built to a new coded-cooperative scheme, which is called PCC-QUP scheme. The coded-cooperative scheme based on polar code is studied on the aspects of codeword construction and performance optimization. Further, we apply the proposed schemes to space-time block coding (STBC) to explore the performance of the scheme. Monte Carlo simulation results show that the proposed cooperative PCC-QUP-STBC scheme can obtain a lower bit error ratio (BER) than its corresponding noncooperative scheme.

• 한국인터넷방송통신학회논문지
• /
• 제14권6호
• /
• pp.63-67
• /
• 2014

협력 재밍 기술에 기반한 분산 제로 빔포밍은 도청자가 시드 공유를 감지 할 수 없으며, 도청자가 도청하기 위해 송신단 주변에 위치한 경우 기존의 기법은 제한적으로 적용된다. 따라서 본 논문에서는 이러한 특수한 시나리오에 대한 해결책을 제시한다. 첫 번째 시간 슬롯에서 중계기는 이진 재밍 메시지를 무작위로 생성하고 송신단과 수신단으로 전송한다. 두 수신기가 안전하고 정확하게 메시지를 복호할 때, 송신단은 정보 메시지와 복호된 메시지에 대한 배타적 논리합 기법을 기반으로 다른 메시지를 만들고 전송하게 되며 도청 노드에 의한 도청을 방지할 수 있다. 마지막으로 본 프로토콜을 기존의 기법과 비교하여 성능을 분석하였으며 도청 노드의 위치에 따른 결과가 우수함을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1067-1070
• /
• 2003

In this paper, we present a remote measurement system for the wireless monitoring of ECU Sensor Signals of vehicle. In order to measure the ECU sensor signals, the interface circuit is designed to communicate ECU and designed terminal wirelessly according to the ISO, SAE regulation of communication protocol standard. A micro-controller 80C196KC is used for communicating ECU sensor signals. ECU sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller 80386EX. LCD, and RF-module. 80386EX software is programmed to monitor the ECU sensor signals using the Borland C++ compiler in which the half duplex method was used for the RS232 communication. The algorithms for measuring the ECU sensor signals are verified to monitor ECU state. At the same time, the information to fix the vehicle's problem can be shown on the developed monitoring software. The possibility for remote measurement of ECU sensor signals using 80386EX is also verified through the developed systems and algorithms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1042-1045
• /
• 2003

In this paper, we present a new method for the monitoring of Electric Control Unit's(ECU) self-diagnostic and the sensor signals of vehicle through Web. In order to measure the ECU's self-diagnostic and sensor signals, the interfaced circuit is designed to communicate ECU and terminal according to the ISO, SAE regulation of communication protocol standard. Microprocessor 80C196KC is used for communicating ECU's self-diagnostic signals and the results are sent to the Embedded Linux System(ELS) through RF module. ELS is developed by SA1110, RF module, Embedded Linux. All commands related in ECU communication are executed through Web. The CGI program composed in web server is executed by user and will return sensor signals from ECU Software on Embedded Linux system is developed to monitor the ECU's sensor signals using the arm compiler tool chain in which RS232 port is programmed by half duplex method. The possibility for remote measurement of ECU sensor signal through Web is verified through the developed systems and algorithms.

• 한국멀티미디어학회논문지
• /
• 제20권2호
• /
• pp.271-278
• /
• 2017

This paper introduces a user-friendly PLC (programmable logic controller) monitoring and control system of heavy machinery using Android based smartphone. The proposed system will control diesel generator and many such like machine without a dedicated PC with respect to similar system and offers a new communication protocol for handling it. The smartphone controls the generator via Wi-Fi, through which it connects to the Raspberry pi which will be installed in the PLC panel to setup the communication between them. Furthermore, Raspberry pi connects to two devices, one is PLC which gives the status and current information of the machine and to ON/OFF the machine. This proposed system used RS485 as a key mediator for data exchanging between Raspberry PI(master) and PLC(slave). RS485 allows multiple devices (up to 32) to communicate at half duplex on single pair of wires and provides a long connectivity area (up to 1200 meters) as compared to another device. This proposed system specially focused on accurate data flow between smartphone and PLC panel.

• 한국멀티미디어학회논문지
• /
• 제20권3호
• /
• pp.511-519
• /
• 2017

This Paper introduces the design and communication method between PLC (Programmable Logic Controller) and Arduino based on MODBUS Protocol. MODBUS connection can be established in a new or existing system very easily, therefore we used this protocol in our proposed system. In the field of automatic devices, multi-function serial port such as RS232, RS422, RS485, and so on creates a great convenience to the developer. This proposed system used RS485 as a key mediator for data exchanging on a connected network. We also believe that it will reduce the development cost in various automated industry because this system can be reused or can be implemented any such PLC installed machines. RS485 is used as a communication interface between PLC (as a slave) and Arduino (as a master), through which a reliable network is created for safe and fast communication. Furthermore, RS485 allows multiple devices(up to 32) to communicate at half duplex on a single pair of wires and provides a long connectivity area (up to 1200 meters) as compare to other device, which makes it a user-friendly for various devices in the automated industry. Moreover, Arduino can play as a mediator by connecting third party device and setup a communication network with PLC.