• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.21-28
• /
• 2000

This study is conducted to analyze effects of soil moisture on the growth of maple(Acer palmatum) under indoor low light intensity. Maples grew under three different light intensities such as sunny place(average 353.2W/$m^2$), half shade(average 7.7 W/$m^2$) and shade/(average 1.9W/$m^2$).Under half shady and shady condition, each 24 planters(2 maples planted in each planter) were used and divided into 3 groups treated with different watering points. Three levels of soil water potential were set for watering points, such as -200mbar, -300mbar or -500mbar. Under sunny condition, there were only group of 8 planters, as comparison. Watering was applied when soil water potentials reached -500maber. The results of plant growth experiment are as followed. 1. Under the shady condition, 32 maples died among 48 maples for 7 months. 9 maples survived, watered at soil water potential -200mbar, 5maples at -300mbar and 2maples at -500mbar. 2. Leaf water content ratios were higher under lower light intensity. For the cell wall became thinner under lower light intensity. 3. Maples in shady were easy to die due to having thin cell wall, therefore they were easy to loss the turgor pressure. 4. In case of half shady condition, the group, watered at soil water potential -200mbar, had much smaller amount of rootlet than -300mbar, because there were excessive soil water. The group, watered at soil water potential -500mbar, had smaller amount of rootlet than -300mbar and there was a remarkable difference in leaf water potential in spite of nearly same soil water potential, because leaves received the water stress under lower soil water potential. 5. When maples grew soundly, the leaf water potential was largely influenced by the soil water potential.

• Journal of Chest Surgery
• /
• v.10 no.2
• /
• pp.183-189
• /
• 1977

There has been an alarming rise in the incidence of carcinoma of the lung in the world. The increase of the disease has been greater in men than in women, but even in women the rate has doubled in the last 20 years. During the 20 year period 1957 through 1976, 33 women with proven primary carcinoma of the lung were treated at Department of Thoracic Surgery, Seoul National University Hospital. During the period of survey, 170 consecutive cases of primary bronchogenic carcinoma were encountered in men, a male to female ratio of 5.2: 1. Ages of patients with bronchogenic carcinoma in women ranged from twenty-seven to sixty-eight years and most of them were over 40 years of age. The duration between the onset of symptoms and admission was about 9 months and the most common complaints were cough [66.6%], chest pain [60.6%], hemoptysis [48.4%] and dyspnea [45.4%]. Bronchogenic carcinoma developed most frequently in the upper lobes, and twelve [36.3%] of cases were squamous cell type, nine [27.2%] were anaplastic cell type, six [18.2%] were adenocarcinoma, one was alveolar cell type and five were unclassified type, in contrast to the usual predominence of adenocarcinoma among women in other reports. One half of the patients were inoperable and resection was feasible in only 24.2 per cent of the patients. There was no operative mortality but one case had bronchopleural fistula after pneumonectomy. Most patients with bronchogenic carcinoma in women were from large cities. Cigarette smoking appeared to be related to the occurrence of the squamous cell and anaplastic cell carcinoma because all heavy smokers had squamous cell or anaplastic cell carcinoma.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.1-13
• /
• 2022

This study aims to investigate the feasibility of the half-cell potential (HCP) measurements on the concrete surface for evaluation of corrosion rate (or corrosion levels) of reinforcing steel in concrete. A series of experimental study is performed to measure HCP (or corrosion potential, E_corr) and corrosion current density (i_corr) of reinforcing steel in concrete cube specimens, with a side length of 200 mm. Various corrosion levels in a range of 0% to 20% of the test specimens are accelerated by impressing current to the reinforcing steel in concrete immersed in 3.0 % NaCl solution. HCP is measured in accordance with ASTM C876-15, and corrosion current density is determined by using the Stern-Geary equation and measured polarization resistance measured by electrochemical impedance spectroscopy (EIS). As a result, a numerical formula that relates HCP and i_corr in the test specimen is established by a regression analysis of the measured data in this study. It is observed that HCP is linearly correlated with log(i_corr) with a R² greater than 0.87, which is less affected by the experimental variables such as concrete mixture proportion, diameter of reinforcing steel and the amount of applied current in this study. These results exhibit that HCP measurements could be effective for evaluation of corrosion rate (or corrosion levels) of reinforcing steel in concrete in the case of exposed to a certain consistent environment.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.2
• /
• pp.75-80
• /
• 1999

Li-ion cells employ lithium transtion metal oxide as the cathode material and carbon as anode material. To manufacture Li-ion cell with higher capacity and better cycle life, the utilization of electrode materials should be as high as possible without lithium deposition onto the carbon surface during charging. A careful design of cell balance between cathode and anode materials as well as a proper charge method is a key factor to design Li-ion cell with long cycle life. In this study, we investigated the effect of cathode/anode weight ratio on the performance of $LiCoO_2/MPCF$ cell. First we evaluated the charge-discharge behaviours of half-cells. And cylindrical Li-ion cells were fabricated using graphitized MPCF anode and $LiCoO_2$ cathode. The voltage profiles for each half-cell in $LiCoO_2/MPCF$ cell were measured by using lithium metal as a reference electrode. Also, we evaluated the cyclic performance of $LiCoO_2/MPCF$ cells according to weight ratio. From the result of experiment $LiCoO_2$ cathode utilization was independent of weight ratio, but MPCF anode utilization was dependant on weight ratio. Also, the optimal weight ratio of $LiCoO_2/MPCF$ cell was found to be $2.0\~2.2$.

• Journal of Plant Biotechnology
• /
• v.4 no.1
• /
• pp.23-27
• /
• 2002

To establish an in vitro mass production system of grape anthocyanin pigments through callus and cell suspension culture, the effects of nitrogen source and sucrose on fresh weight and anthocyanin production in cell suspension culture of 'Sheridan' grape level were studied. When the medium was devoid of $NO_3^-$, cell fresh weight was either remained stable (1% sucrose) or slightly decreased with culture time (2,3, and 4% sucrose). When $NH_4^-$ was lacking, 3% sucrose was most favorable for cell growth. When $NH_4^-$ was supplied as N source, the anthocyanin content of 2% sucrose containing medium was maintained 2 times higher than other levels till day 8 in culture, then that of 3 and 4% sucrose which peaked at day 12 thereafter. The anthocyanin content was low than $NO_3^-$-free media. Total anthocyanin content in $NH_4^-$-free medium was just about a half of that of $NH_4^+$ medium. Anthocyanin production of 2% sucrose in $NH_4^+$ medium was maintained about 3-fold till day 8, then decreased thereafter. In $NH_4^+$ medium, pH decreased gradually with final pH of 3.5 to 4.0, while pH in $NH_4^+$-free medium increased with final pH of 6.5 to 7.5.

• Progress in Superconductivity
• /
• v.6 no.1
• /
• pp.7-12
• /
• 2004

Due to the very fast switching speed of Josephson junctions, superconductive digital circuit has been a very good candidate fur future electronic devices. High-speed and Low-power microprocessor can be developed with Josephson junctions. As a part of an effort to develop superconductive microprocessor, we have designed an RSFQ 4-bit ALU (Arithmetic Logic Unit) in a pipelined structure. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in this work consisted of three DC current driven SFQ switches and a half-adder. We successfully tested the half adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached switches at the input ports to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this setup, 1-bit block of ALU was successfully tested up to 40 GHz. An RSFQ 4-bit ALU was fabricated and tested. The circuit worked at 5 GHz. The circuit size of the 4-bit ALU was 3 mm ${\times}$ 1.5 mm, fitting in a 5 mm ${\times}$ 5 mm chip.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.3
• /
• pp.235-242
• /
• 2009

In this paper a new asymmetrical PWM bidirectional half bridge converter is proposed. The proposed converter has simple structure and wide duty cycle range, and therefore is suitable for applications such as fuel cells which have wide voltage variation. With the proposed asymmetrical PWM method the current rating of switch and transformer is significantly reduced compared to the conventional phase angle control method, and ZVZCS and synchronous rectification can also be achieved. This could result in high efficiency and high power density. The proposed converter is analytically compared to the conventional converter, and the proposed method was validated through the experiment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.4
• /
• pp.301-304
• /
• 2008

For bioremediation of the benthic layer uptake kinetics of phosphate by microphytobenthos Nitzschia sp.(JFH200406) were investigated. A short-term phosphate uptake revealed that the maximum uptake rate(${\rho}_{max}$) and half-saturation constant($K_s$) were 0.132 pmol/cell/hr and 502.6 ${\mu}M$, respectively. The maximum specific uptake rate calculated between ${\rho}_{max}$ and the phosphorus cell quota($Q_p$), calculated from Strathmann equation, was 14.4/day. The values of these parameters indicate that Nitzschia sp. accommodates well to surroundings of high phosphate, and can uptake over 14-times more than the phosphorus cell quota. Thus, microphytobenthos Nitzschia sp. may be a useful species for bioremediation of the benthic layer.

• Tuberculosis and Respiratory Diseases
• /
• v.76 no.4
• /
• pp.184-187
• /
• 2014

A nasal-type extranodal natural killer/T-cell lymphoma is considered an aggressive form of non-Hodgkin's lymphoma, with approximately half of all patients relapsing during the follow-up period, and most relapses occurring within the first 2 years of remission. Here we report an unusual case of a 42-year-old man who experienced recurrence in single pleura after 8 years of remission.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.40 no.2
• /
• pp.95-101
• /
• 2007

We investigated the growth and phosphate uptake of a toxic dinoflagellate, Gymnodinium catenatum, isolated from Yeosuhae Bay, South Korea. A short-term phosphate uptake experiment revealed that its maximum uptake and the half-saturation constant were 1.39 pmol/cell/hr and $2.65{\mu}M$, respectively. In a semicontinuous culture, the maximum specific growth rate and minimum phosphorus cell quota of G. catenatum were 0.39/day and 1.27 pmol/cell, respectively. Thus, G. catenatum is a poor competitor in terms of inorganic nutrient use and is unlikely to form blooms in Yeosuhae Bay.