• Bulletin of the Korean Chemical Society
• /
• v.7 no.6
• /
• pp.442-444
• /
• 1986

Starting with the readily available p-tert-butyl-calix[4]arene 2, tert-butyl groups are removed by $AlCl_3$-catalyzed de-alkylation reaction, and the calix[4]arene 3 formed is converted to the tetraacetate 4. This compound undergoes Fries rearrangement to yield p-acetylcalix[4]arene 6, which seems to be an attractive starting material for the introduction of functional groups. As a preliminary experiment p-(1-hydroxyethyl)calix[4]arene 7 is prepared by LiAlH$_4$ reduction of 6.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1223-1225
• /
• 1995

The $NO_2$ gas-detection characteristics were investigated using the functional organic Langmuir-Blodgett(LB) films of Copper-tetra-tert-butylphthalocyanine(CuTBP). The optimum conditions for a film deposition were obtained through a study of $\pi$-A isotherms, and the deposited film status was confirmed by the ellipsometry measurements. The $NO_2$ gas response experiments under 200 ppm concentration at room temperature show that there are increment of electrical conductivity by 40 times and 25 seconds of response time, and 40 seconds of recovery times.

• Korean Journal of Crystallography
• /
• v.9 no.2
• /
• pp.120-124
• /
• 1998

N-tert-Butyl-2-(1-acetoxy-2-fluoro-1-butyl)benzenesulfonamide의 분자 및 결정구조를 X-선회절법으로 연구하였다. 결정의 공간군은 P21/c이고, 단위포 상수는 a=8.583(2) , b=14.674(2) , c=14.703(2) , β=103.23(1)0, Z=4, V=1802.6(5) 3, Dc=1.27 Mgm-3이다. 회절반점들의 세기는 Rigaku AFC-5 Diffractometer로 얻었으며, graphite로 단색화한 Cu-KαX-선을 사용하였다. 분자구조는 직접법으로 풀었으며 최소자승법으로 정밀화하였다. 최종신뢰도 R값은 2472개의 회절반점에 대하여 0.069였다. 분자 내에 N(7)과 O(4)사이에 1개의 수소결합[2.990(4) ]을 갖으며, C(14)와 C(15)는 반대배열을 갖고 있다. 분자간 가장 인접한 거리는 3.465(5) [C(19) O(5)] (symmetry code: -x, y+1/2, -z+1/2)로 분자간 접촉은 van der Waals 힘에 의해 결합되어 있다.

• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.25-35
• /
• 1993

Tetra-tert-butyl-tetrapropionycalix (4) arena (C56H7208) is Triclinic, space group Pl, with a=13.664(5), b=17.585(5), c=12.863(2)A, a=109.33(2), B=111.97(2), γ=76.45(3) ˚, Z=2, V=2684.08A3, D, =1.152g/cm3, Dm=1.15g/cm3. The intensity data were collected on an Enraf-Nonius CAD-4 Diffractometer with a graphite monochromated Mo-Ka radiation. The structure was solved by direct methods and refined by leastsquares methods. The final R factor was 0.084 for 2561 observed reflections. The configuration of the molecule from the X-ray crystallographic investigation has the partial cone conformation, three tort-butylphenyls are down and a tort-butylphenyl is up. Three propionyloxy groups direct toward the exterior of the macrocycle cavity.

• Korean Journal of Crystallography
• /
• v.10 no.1
• /
• pp.1-8
• /
• 1999

Two conformational isomers of p-tert-butylcalix[4]arene hexanoate were prepared from the reaction of-p-tert-butylcalix[4]arene and hexanoly chloride in the presence of AlCl3 in CH2Cl2 and their structures were determined by NMR spectra and X-ray diffraction as a cone and a 1,3-alternate conformer, respectively. The crystal of cone conformer (C68H96O8·(CH3)2CO) is triclinic, P, a=15.066(1) , b=16.063(1) , c=16.365(1) , α=79.75(2)o, β=109.95(2)o, γ=80.32(0)o, V=3602.7(4) 3, Z=2. The intensity data were collected on Simens SMART diffractometer/CCD area detector. The structure was solved by direct method and refined by least-squares calculations to a final R value of 0.144 for 4638 observed reflections. The molecular conformation is distorted symmetric cone with the flattening A and D phenyl rings. The crystal of 1,3-alternate conformer (C68H96O8·2CHCl3) is orthorhombic, Pca21, a=34.586(5) , b=10.207(3) , c=20.394(4) , V=7199(3) 3, Z=4. The intensity data were collected on an Enraf-Noninus CAD-4 Diffractometer with a graphite monochromated Mo-K radiation. The structure was solved by direct method and refined by least-squares calculations to a final R value of 0.152 for 2241 observed reflections. The molecule has a pseudo mirror symmetric 1,3-alternate conformation.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.54-57
• /
• 2006

Structure H formation experiments were conducted in a semi-batch stirred vessel using methane as the small guest substance and neohexane(NH), tert-butylmethylether(TBME) and methylcyclohexane(MCH) as the large molecule guest substance (LMGS). The results indicate that the rates of gas uptake and induction times are generally dependent on the magnitude of the driving force. When tert-butyl methyl ether is used as the LMGS rapid hydrate formation, much smaller induct ion time and rapid decomposition can be achieved. Liquid-liquid equilibrium (LLE) data for the above LMGS with water have been measured under atmospheric pressure at 275.5, 283.15K, and 298.15K. It was found that TBME is the most water soluble followed by NM and MCH. The solubility of water in the non-aqueous liquid was found to increase in the following order: MCH

• Journal of Photoscience
• /
• v.4 no.2
• /
• pp.35-40
• /
• 1997

The sensory transduction processes of blue light in guard cells have been suggested the involvement of Ca$^{2+}$/calmodulin-dependent myosin light chain kinase (MLCK) or MLCK-like proteins. The source of Ca$^{2+}$ required for the signal transduction process was investigated in guard cell protoplasts (GCPs). The GCPs showed the typical H$^+$ pumping activity by blue light (200 $\mu$mol m$^{-2}$ s$^{-1}$) and fusicoccin (10 $\mu$M) under background red light (600 $\mu$mol m$^{-2}$ s$^{-1}$). The blue light-dependent H$^+$ pumping was not significantly affected by the externally changed Ca$^{2+}$ concentrations. The addition of 1 mM Ca$^{2+}$ in the bathing medium ratherly inhibited the H$^+$ pumping. In contrast, the blue light-dependent H$^+$ pumping was inhibited by caffeine and 2,5-di-(tert-butyl)-1,4-benzohydroquinone (BHQ), inhibitor of C$^{2+}$-ATPase in endoplasmic reticulum (ER) without inhibiting the H $^+$ pump. The inhibition by caffeine and BHQ was fully reversible. The extent of inhibition by caffeine and BHQ was larger when they were added together than when added separately. The results suggest that Ca$^{2+}$ required for the blue light-dependent H$^+$ pumping may be released from the intracellular Ca$^{2+}$ stores, probably ER in guard cells.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.390-405
• /
• 1988

The chlorination of $C_7H_16,\;C_8H_18,\;C_10H_22,\;and\;(Me_2CH)_2$ with N-Chlorosuccinimide, tert-BuOCl, $CCl_3SO_2Cl,\;CCl_4,\;CCl_3SCl,\; PCl_5,\;and\;Cl_2\;in\;C_6H_6\;or\;CS_2$ which both form loose complexes with $Cl_2$ atoms yielded mixtures of isomeric monochloroalkanes which were analyzed quantitatively. An isomer ratio differing from that known for the substitution of paraffinic hydrocarbons was observed. The isomer distribution observed is the result of the combined effects of the differing C-H dissociation energies of the different types of H atoms of the alkane and of the free energy of the attacking radical with polar effects of the attacking radical as well as of the hydrocarbon.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.86-91
• /
• 2015

The MPPO (3-methyl-1-phenyl-2-phospholene-1-oxide) was prepared by using various polymerization inhibitors such as BHT (2,6-di-tert-butyl-4-methylphenol), TBC (4-tert-butylcatechol), and copper stearate. The MPPO was confirmed by the analysis using FTIR, $^1H$-NMR, and GC/MS regardless of the type of inhibitors. The yield of MPPO increased with the increase of reaction time, whereas the purity of MPPO decreased slightly. The yield and purity of MPPO increased with temperature, but the MPPO prepared by using copper stearate as a polymerization inhibitor exhibited no changes in the purity. The amount of inhibitors had no effect on the yield of MPPO. The purity of MPPOs increased with the amount of inhibitors, but the MPPO prepared by using BHT showed no changes of the purity. We found that the MPPO prepared by using copper stearate exhibited the highest catalytic activity for diphenylcarbodiimide synthesis.

• Journal of the Korean Chemical Society
• /
• v.35 no.6
• /
• pp.673-679
• /
• 1991

The electrochemical reduction of N-tert-butylbenzothiazole-2-sulfenamide (TBBS; vulcanization accelerator) was investigated by direct current, differential pulse polarography, cyclic voltammetry and controlled potential coulometry. The electrode reduction of TBBS proceeded E-C-E-C reaction mechanism by four electrons transfer at irreversible one wave (-2.31 volts vs. Ag/0.1M AgN$O_3$ in AN). As the results of controlled potential electrolysis, mercaptobenzothiazole (MBT), benzothiazole disulfide (MBT dimer) and extricated sulfur were products which followed by cleavage of the sulfenamide (-S-N=) bond. Upon the basis of products analysis and polarogram interpretation with pH variable, electrochemical reaction mechanism was suggested.