• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.1
• /
• pp.27-36
• /
• 2001

In this paper, micromachined millimeter-wave cavity resonators ar presented. One-port and two-port cavity resonators at Ka-band are designed using 3D design software, HP $HFSS^{TM}$ ver. 5.5 Cavity resonators are fabricated on Si substrate, which is etched down for the cavity, bonded with a Quartz wafer in which metal patterns for the feeding line coupling slot are formed. One-port resonator shows the resonant frequency of 39.34 GHz, the return loss of 14.5 dB, and the loaded $Q(Q_{L})$ of 150. Two-port cavity resonator shows the resonant frequency of 39 GHz, the insertion and return losses of 4.6dB and 19,9dB, the loaded($Q_{L}$) and unloaded $Q(Q_{U})$) of 44.3 and 107, respectively.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1340-1342
• /
• 2004

근래에 DSP설계기술은 하루가 다르게 성장 해가고 있다. 기존에 많은 양의 소수점 연산이 필요한 기기에 자주 사용되어왔던 TMS320C3x DSP시리즈는 소수점연산에는 유리하지만 DSP를 사용하기 위해 외부메모리 및 A/D컨버터, PWM제너레이터, 엔코더 카운팅 회로 등 주변회로를 설계하는데 많은 시간과 비용이 소비되었다. TMS320LF2407은 기존에 사용하던 복잡한 주변회로가 모두 하나의 컨트롤러에 내장되어 있어 사용하기가 편리하며 고속의 연산능력이 있다. 본 논문에서는 자기부상시스템을 모델링하고 이산시간에서 처리 가능한 다이나믹필터와 상태궤환제어기를 설계한 뒤 DSP를 이용한 부상실험셋트를 구성하여 실험을 통해 DSP의 효용성을 검증하고자 한다.

• Journal of Oriental Neuropsychiatry
• /
• v.15 no.1
• /
• pp.197-209
• /
• 2004

Objectives : The purpose of this case-control research was to investigate the effects of acupuncture stimulation on autonomic nervous system for patients with HRV and to find out relationship with anti-stress effects. Methods : The study group consists of 24 patients with self-recognition of stress as the case group, and 20 normal person as the control group by similar age. We measured HRV of case and control groups before acupuncture stimulation, prick acupuncture in Hegu(LI4), Taichong(Liv3), Shenme(H7), Neiguan(P6), Zusanli(S36). After treating for 20 minutes, measurement values of HRV and PSV were compared for pre-acupuncture and post-acupuncture. Results : 1. LF norm, HF norm, LF/HF between the case and control groups were significant different in HRV before acupuncture stimulation in the 1st experiment. 2. HRT, SDNN, SDSD, LF norm, HF norm, and LF/HF of the case group were significant different in HRV after acupuncture stimulation in the 1st experiment. HRT of the case group was significantly different in HRV after acupuncture stimulation in the 1st experiment. 3. LF norm, HF norm, LF/HF of the case group were significant different between the 1st and 2nd experiment in HRV before acupuncture stimulation. 4. LF norm, HF norm, and LF/HF were significant different between the 1st and 2nd experiment in HRV of patients whose symptoms improved. But HRV of patients whose symptoms unimproved didn't show significant difference. Conclusion : The results suggest that acupuncture stimulation is associated with changed activity in the sympathetic and parasympathetic nervous system. Measurement values of HRV is suitable to estimate the activity of automatic nervous system.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.168-171
• /
• 2006

Hot deformation behavior of A350 LF2 alloy was characterized by compression tests in the temperature range of 800-$1250^{\circ}C$ and the strain rate range of $0.001-10s^{-1}$. The microstructural evolution during hot compression was investigated and deformation mechanisms were analyzed by constructing processing map. Processing maps were generated using the dynamic material model (DMM). The combination of dynamic material model and Ziegler's instability criterion was applied to predict an optimum condition and unstable regions for hot forming.

• Transactions of Materials Processing
• /
• v.15 no.4 s.85
• /
• pp.333-339
• /
• 2006

Hot deformation behavior of a carbon steel (A350 LF2) was characterized by compression tests in the temperature range of $800-1250^{\circ}C$ and the strain rate range of $0.001-10s^{-1}$, The microstructural evolution during hot compression was investigated and deformation mechanisms were analyzed by constructing a deformation processing map. Processing maps were generated using the combination of dynamic material model (DMM) and flow instability theories based on the flow stability criteria and Ziegler's instability criterion. In order to evaluate the reliability of the map, the mirostructural characteristics of the hot compressed specimens were correlated with test conditions in the stable and unstable regime. The combined microstructural and processing map of A350 LF2 was applied to predict an optimum condition and unstable regions for hot forming.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2019.06a
• /
• pp.222-224
• /
• 2019

Light Field (LF) camera captures not only the light intensity but also the light direction coming to camera. While the rich information captured by LF camera enables many interesting applications such as digital refocusing, viewpoint changing, and 3D reconstruction, but it also requires powerful coding tools to reduce its large volume of data. In this paper, we investigate using the intra prediction scheme of the versatile video coding (VVC), which is the most recent video coding technology currently under developing, to compress the LF image. The Intra Block Copy (IBC) technique in VVC is exploited considering special LF image structure. The experimental result shows that VVC intra predict ion outperforms the H.265/HEVC intra coding technique in encoding LF data irrespective of using the IBC mode or not.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.71-72
• /
• 2007

In this study, we investigated the fabrication of MLR (multi-layer resist) with a very thin diamond-like carbon (DLC) layer. ArF PR/$SiO_2$/DLC MLR structure was investigated and etching characteristics of the DLC layer was patterned using $SiO_2$ hard-mask by varying the process parameters such as different high-frequency/low-frequency combination ($f_{LF}/f_{HF}$), HF/LF power ratio ($P_{HF}/P_{LF}$), $O_2$ flow and $N_2$ flow rate in $O_2/N_2$/Ar plasmas. The results indicated an increased etch rate of DLC for the higher $f_{LF}/f_{HF}$ combination and for the increased low-frequency power ($P_{LF}$). And the etch rate of DLC was decreased with increasing the $N_2$ flow rate in $O_2/N_2$/Ar plasmas. In order to confirm the application of DLC MLR for the etching process of silicon oxide, the stack of ArF PR/BARC/$SiO_2$/DLC/TEOS/Si was investigated.

• Reproductive and Developmental Biology
• /
• v.32 no.1
• /
• pp.39-43
• /
• 2008

Most studies on transgenic bioreactors have focused on expression levels of interest genes. In this study we examined whether transgenic bioreactors would inherit expression level of the Oansgene to long-term generations independently of transgene sources. We employed three transgenic mice, which were separately reported, carrying different transgenes and copy numbers, 27 kb of hLF and 22 kb of hIL-10 genomic sequences, and 1.3 kb of hTPO cDNA, respectively. Three females of the transgenic lineages crossbred with a wild-type male up to 20 generations to test transgenic frequencies of their progenies and to determine expression levels of the transgenes. Ultimately, transmission rates of kLF, hIL-10, and hTPO were $64.3{\pm}7.0$, $59.3{\pm}9.8$, and $56.1{\pm}9.7$, respectively, appeared following Mendelian pattern of inheritance. Notably, we found that levels of expressions of hLF, hIL-10, and hTPO in milk were sustained to high numbers of generations. No transgene silencing of expression was observed in every generations of all transgenic mice. In conclusion, we suggest that once established animal bioreactors could consistently transmit the transgene to continual generations, without loss of expressional activity, independently of transgene sources.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.26 no.3
• /
• pp.23-31
• /
• 2018

This study was carried out to investigate the effects of livestock manure compost and fish-meal liquid fertilizer on the growth of cucumber and the soil properties for the stable production of organic cucumber. Cucumber was transplanted in greenhouse on the $6^{th}$ of April in 2017, and this experiment contained five treatments: livestock manure compost 100% (LC 100%), livestock manure compost 50% + fish-meal liquid fertilizer 50% (LC50 + LF50), livestock manure compost 50% (LC50), chemical fertilizer (NPK), and no fertilizer (NF). As a result, it was shown that soil chemical properties of LC50 + LF50 plot is not different from that of LC100 plot except for the EC content, but soil chemical properties of LC50 + LF50 plot is statistically significantly different from that of NPK plot except for pH. As a result of evaluating the functional diversity of soil microbial communities using Biolog system, the substrate richness (S) and the diversity index (H) were the highest in LC50 + LF50 plot. As a result of comparing the cucumber growth and yield, it was found that there was no statistically significant difference between the plant height and the fresh weight of LC100, LC50 + LF50, and NPK plot, but the plant height and the fresh weight of LC100, LC50 + LF50, and NPK plot were different from that of LC50 and NF plot. The yield of cucumber was the highest in NPK plot r(7,397 kg/10a), but there was no statistically significant difference in the yield of cucumber between NPK plot and LC100, LC50 + LF50 plot. The above-described results suggested that the livestock manure compost and fish meal liquid fertilizer can be used for organic cucumber production under greenhouse condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.9
• /
• pp.1287-1293
• /
• 2016

The objectives of this experiment was to evaluate the subsequent growth and organ weights, blood profiles and cecal microbiota of broiler chicks fed pre-starter diets containing fermented soybean meal products during early phase. A total of nine hundred 1-d-old chicks were randomly assigned into six groups with six replicates of 25 chicks each. The chicks were fed control pre-starter diet with dehulled soybean meal (SBM) or one of five experimental diets containing fermented SBM products (Bacillus fermented SBM [BF-SBM], yeast by product and Bacillus fermented SBM [YBF-SBM]; Lactobacillus fermented SBM 1 [LF-SBM 1]; Lactobacillus fermented SBM 2 [LF-SBM 2]) or soy protein concentrate (SPC) for 7 d after hatching, followed by 4 wk feeding of commercial diets without fermented SBMs or SPC. The fermented SBMs and SPC were substituted at the expense of dehulled SBM at 3% level on fresh weight basis. The body weight (BW) during the starter period was not affected by dietary treatments, but BW at 14 d onwards was significantly higher (p<0.05) in chicks that had been fed BF-SBM and YBF-SBM during the early phase compared with the control group. The feed intake during grower and finisher phases was not affected (p>0.05) by dietary treatments. During total rearing period, the daily weight gains in six groups were 52.0 (control), 57.7 (BF-SBM), 58.5 (YBF-SBM), 52.0 (LF-SBM 1), 56.7 (LF-SBM 2), and 53.3 g/d (SPC), respectively. The daily weight gain in chicks fed diet containing BF-SBM, YBF-SBM, and LF-SBM 2 were significantly higher values (p<0.001) than that of the control group. Chicks fed BF-SBM, YBF-SBM, and LF-SBM 2 had significantly lower (p<0.01) feed conversion ratio compared with the control group. There were no significant differences in the relative weight of various organs and blood profiles among groups. Cecal microbiota was altered by dietary treatments. At 35 d, chicks fed on the pre-starter diets containing BF-SBM and YBF-SBM had significantly increased (p<0.001) lactic acid bacteria, but lowered Coli-form bacteria in cecal contents compared with those fed the control diet. The number of Bacillus spp. was higher (p<0.001) in all groups except for LF-SBM 1 compared with control diet-fed chicks. At 7 d, jejunal villi were significantly lengthened (p<0.001) in chicks fed the fermented SBMs vs control diet. Collectively, the results indicate that feeding of fermented SBMs during early phase are beneficial to the subsequent growth performance in broiler chicks. BF-SBM and YBF-SBM showed superior overall growth performance as compared with unfermented SBM and SPC.