• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.341-344
• /
• 1989

A Modified equivalent circuit by combining a series and parallel of polymer matrix for estimating the dielectric constant ${\bar{K}}_{33}$ values changing the volume percent of $PbTiO_3$, the dependences of frequency for the 713 and dissipation factor for 0 - 3 composites was derived. The difference of the dielectric constant and dissipation factor between the calculated and measured values became smaller at higher volume percent of $PbTiO_3$. There was, good agreement between the calculated and observed results for 70 volume percent of $PbTiO_3$ and 30 volume percent of Eccogel composite at 1(KHz), 25($^{\circ}C$). The optimized variable x was 0.94 in $PbTiO_3$ ceramics. $PbTiO_3$ powder and Eccogel polymer were used as piezoelectric fillers and matrix, respectively.

• Membrane and Water Treatment
• /
• 제15권2호
• /
• pp.79-88
• /
• 2024

Modification of Polyvinylidene fluoride (PVDF) hollow fiber membranes (HFMs) characteristics and performance were investigated via post treatment using different oxidants. sodium hypochlorite (NaOCl), hydrogen peroxide (H₂O₂) and potassium persulfate (KPS). Fourier transform infrared (FTIR) and Proton nuclear magnetic resonance (¹H-NMR) results revealed no structural differences after post treatment. Cross-sectional micrographs show finger-like structures at the outer and inner walls of the HFMs and sponge-like structures in middle, where NaOCl and KPS post treated fibers exhibited a decrease in finger-like structures in addition to aggregates appearing on the surface, consequently leading to an increase in the surface roughness (Ra) from 48 nm to 52.8nm and 56 nm, respectively. Hydrogen peroxide post treatment only was observed to decrease the water contact angle from 98° to 81.4°. It was also observed that the elongation at break and the modulus deceased after NaOCl post treatment from 34.5 to 28.5% and from 19.3 Mpa to 16.6 Mpa, respectively. Moreover, pure water flux after H₂O₂ post treatment increased from 87.8 LMH/bar to 113 LMH/bar at 0.45 bar, while no changes were detected for the methylene blue dye rejection (74%) between raw and hydrogen peroxide post treated fibers at the same pressure. According to the findings hydrogen peroxide post treated PVDF HFMs have the most uniform surfaces, with almost no alterations in structural and mechanical properties or porosities with enhanced hydrophilicity and pure water flux maintaining appropriate rejection. Therefore, it is considered an efficient surface modifying agent for UF/NF membranes or low-pressure separators.

• 식물조직배양학회지
• /
• 제21권2호
• /
• pp.99-103
• /
• 1994

비선택성 제초제인 bialaphos는 고등식물에 있어서 glutamine 합성을 억제하여 식물체를 고사 시키는 능력을 갖고 있다. 본 연구에서 acetylteansferase에 의해 encoding된 bialaphos 저항성 유전자(bar gene)는 세균(Pseudomonas sryngae pv tabaci)의 genomic DNA로부터 cloning된 것을 사용하였다. 수분시킨 담배의 화계에 일정한 시간별로 bar 유전자를 처리한 결과 수분 후 30-40시간 사이의 처리구 에서 형질전환 식물체가 가장 많이 얻어 졌다. 그러한 형질전환 식물체의 kanamycin과 bialaphos 저항성 형질은 자식후대(T$_1$, T$_2$)에 있어서도 우성형질로 유전되었으나 wild type의 담배는 상기의 약제를 처리 하였을때 전부 고사하였다. 그리고, T$_1$세대의 형질전환 식물체로부터 전 염색체 DNA를 추출하여 Southern 분석한 결과 bar 유전자가 식물의 염색체상에 안정하게 존재하는 것을 확인하였다. 이상의 결과로부터 담배의 수분, 수정 시기에 외부유전자인 bar를 화주에 처리함으로써 bialaphos 저항성 식물을 만들어낼 수 있었다.

• 한국세라믹학회지
• /
• 제43권10호
• /
• pp.646-652
• /
• 2006

Several oxynitride glasses were fabricated by means of adding $Si_3N_4$ powders as nitrogen source to Ca-Al-Si-O-N (CAS) and Mg-Al-Si-O-N (MAS) glass powders, and heat-treated in graphite crucible at 1600$^{\circ}C$ for 1 h. The physical and mechanical properties as well as impact resistance were generally increased and compared with each other. The impact resistance properties of those manufactured glasses were evaluated by DOP (depth of penetration) method which is a way to analyze armor materials. There were two means to be used herein; the copper jet impacted at hyper velocity by exploding K2l5 warhead and tungsten heavy alloy (WHA) impact bar at high velocity by firing in 30 mm solid propellent gun. The impact resistance properties against copper jet were increased and then decreased with increasing nitrogen content, while those against WHA bar were not changed apparently with nitrogen content.

• 한국조리학회지
• /
• 제20권6호
• /
• pp.245-253
• /
• 2014

본 연구에서는 순환형 감압건조 및 초고압 추출공정을 이용하여 제조한 감귤농축액을 소비자의 건강과 편의성을 위해 첨가량을 달리하여 영양바에 적용 제조하여 품질특성을 알아보았다. 영양바의 색도에서 명도는 대조군이 72.3으로 가장 높았으며, 적색도는 15%와 20% 첨가군에서 2.7로, 황색도도 첨가량이 증가함에 따라 증가하는 경향을 나타내었다. 영양바의 pH는 대조군이 7.10, 첨가군이 6.57~6.97의 범위로 대조군의 pH 보다는 낮게 나타났다. 영양바의 경도는 감귤농축액이 증가함에 따라 감소하는 경향을 나타내었지만 유의적인 차이는 나타내지 않았다. 탄력 및 응집성은 감귤 농축액 증가에 따라 감소하였으며, 씹힘성은 대조군에 비해 감소하는 경향을 나타내었다. 영양바의 색의 기호도는 15% 첨가군이 가장 높게 평가되었으며, 향의 기호도는 20% 첨가군이 가장 높게 평가되었다. 맛에 대한 기호도는 15% 첨가군에서 높은 값을 나타내었다. 영양바의 조직감에 대한 기호도는 15% 첨가군에서 높은 기호도를 나타내었다. 전체적인 기호도는 15% 감귤농축액을 첨가한 영양바가 대조군보다 선호되는 것을 알 수 있었다. 상관관계에 대한 결과는 flavor에 대한 상관관계가 각 측정항목에 대해 우수하게 나타났다. 이상의 결과를 종합하여 감귤농축액 15% 첨가수준에서 영양바 제조 시 영양바에 대한 기호도를 높여줄 수 있을 것으로 판단된다.

• 대한수학회보
• /
• 제58권3호
• /
• pp.781-794
• /
• 2021

Let Ω be a smoothly bounded pseudoconvex domain in ℂⁿ and assume that the (n - 2)-eigenvalues of the Levi-form are comparable in a neighborhood of z₀ ∈ bΩ. Also, assume that there is a smooth 1-dimensional analytic variety V whose order of contact with bΩ at z₀ is equal to 𝜂 and 𝚫_n-2(z₀) < ∞. We show that the maximal gain in Hölder regularity for solutions of the ${\bar{\partial}}$-equation is at most ${\frac{1}{\eta}}$.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1990-1994
• /
• 2013

A novel multi-cationic borane, tri-N-methylpyridinium substituted triarylborane, $[BAr^N_3]I_3$ ($[2]I_3$) ($Ar^N=4-(4-C_5H_4N-Me)-2,6-Me_2-C_6H_2$) was prepared from the corresponding neutral tris-pyridyl borane, $BAr_3$ (2a) ($Ar=4-(4-C_5H_4N)-2,6-Me_2-C_6H_2$). The crystal structure of 2a determined by X-ray diffraction study reveals the presence of tri-coordinate boron center with peripheral pyridyl moieties. The fluoride ion affinity of the cationic borane, $[2]I_3$ was investigated by UV-vis absorption titrations and was compared with that of neutral 2a. While 2a binds fluoride with the binding constant of $1.9{\times}10^2\;M^{-1}$ in $THF/H_2O$ (9:1 v/v) mixture, $[2]I_3$ shows a very high binding constant ($K=1.0{\times}10^8\;M^{-1}$) that is greater by six orders of magnitude than that of 2a in the same medium. This result indicates that the fluorophilicity of triarylborane can be drastically enhanced by multiple pyridinium substitutions.

• 공업화학
• /
• 제7권1호
• /
• pp.91-100
• /
• 1996

사염화실리콘에 에틸알콜의 수분함랑을 2.5, 5.0, 7.0wt.%로 달리하여 축중합된 에틸실리케이트(CES : condensed ethylsilicate)용액들을 합성하였다. 용액의 졸-겔 전이 거동 조사를 위하여 시간경과에 따른 용액의 부피, 밀도, $SiO_2$ 함량, 본성점도 및 수평균분자량변화를 측정하였으며, 용액의 고분자 형상을 본성점도와 수평균분자랑 관계로부터 간접적으로 알아보았다. 에틸알콜의 수분함량을 7.0wt.%로 하여 합성한 CES-3는 수분함량이 2.5wt.%, 5.0wt.%인 CES-1, CES-2와 다른 졸-겔 전이 거동을 보였으며, 복합산화물계 요업재료 제조시에 TEOS의 가수분해 속도를 조절하기위하여 부분가수분해 시킨 PHT(Partially Hydrolysed TEOS)와 유사한 거동을 보였다. Mark-Hawink가 제시한 $[{\eta}]=K\bar{Mn}^{{\alpha}}$식에 의한 CES 및 PHT의 고분자형상은, 지수 ${\alpha}$값이 0.53~0.84로 용액 모두 선상 혹은 사슬상 고분자로 나타났으며, 이상의 졸-겔 거동과 고분자형상에 대한 비교 실험 결과로부터 CES-3는 PHT와 매우 유사한 물성을 가지고 있어 복합산화물계 요업재료의 원료로 사용될수 있는 가능성이 높은것으로 나타났다.

• 한국수소및신에너지학회논문집
• /
• 제18권3호
• /
• pp.325-333
• /
• 2007

[ $LiNi_{0.995}Al_{0.005}O_2$ ], $LiNi_{0.990}Ti_{0.010}O_2$ and $LiNi_{0.0990}Al_{0.005}Ti_{0.005}O_2$ were synthesized with a combustion method by calcining in an $O_2$ stream at $750^{\circ}C$ for 36 h. The X-ray diffraction patterns of these synthesized samples showed $-NaFeO_2$ structure of rhombohedral system(space group; $R{\bar{3}}\;m$) with no evidence of impurities. Among these samples, $LiNi_{0.995}Al_{0.005}O_2$ exhibited comparatively high first discharge capacity and discharge capacity, and the best cycling performance. $LiNi_{0.995}Al_{0.005}O_2$ had the first discharge capacity of 165.2 mA h/g and a discharge capacity of 116.7 mA h/g at the 50th cycle at 0.1C rate. It showed the first discharge capacity of 141.0 mA h/g and a discharge capacity of 93.5 mA h/g at the 50th cycle at 0.5C rate.

• International Journal of Costume and Fashion
• /
• 제16권2호
• /
• pp.67-79
• /
• 2016

The Oroqen (鄂伦春) traditional costume refers to what the nomadic Oroqen people used to wear before they settled into fixed communities. With very limited contact with the outside world and with limited resources, the clothing material was virtually entirely animal hide. With settlement, especially after 1996, animal hide clothing has declined among the Oroqen. As an important part of Oroqen tradition and culture, the Oroqen people keep endevoring to promote costume design through competition and exhibitions. Therefore, this paper seeks to present an insightful understanding of Oroqen culture and the formative features of their general clothing. We explored the formative features of Oroqen animal hide clothing based on an analysis of actual artifacts and literature. As a result, the characteristics of Oroqen hide clothing were found in five types - coats, trousers, hats, shoes, gloves. For the decoration, embroidery and applique were their way of decoration, and Mother Nature was their source of pattern design.