• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.1
• /
• pp.74-78
• /
• 2014

Objectives: Purpose of this study was to evaluate the noise level exposures at the different cannonball type and locations in the tank gun drill ranges. Methods: We visited the tank gun drill ranges and measured with a sound level meter(3M Quest SoundPro$^{TM}$) with the value of Peak(dB(A)). Results: The highest peak value of impulse noise level averaged 166.3 dB(A) at the site of loading solider. The highest peak value of impulse noise level by size of cannonball averaged 165.9 dB(A) at the 120 mm size cannonball of the tank. This result was significantly different from the other size of cannonballs such as 7.62 mm, 90 mm, and 105 mm(p < 0.001). Among the four types of soldier site on the tank, average noise levels of loading soldier, 156.6 dB(A), were higher than the other three types of soldier site (p > 0.05). Conclusions: This study confirmed that there were needed for a proper control to reduce the amount of impulse noise exposure at the tank gun drill ranges.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.22 no.3
• /
• pp.171-175
• /
• 2020

Studies in socioeconomic impacts of air pollution are inevitable to merge data of the air pollutant density, weather, and socioeconomic variables. Due to their spatiotemporal disparities in units, to combine these data are time and effort consuming generically. The data described in this article aims to provide the major variables of air pollution and weather at the Si-Gun-Gu level to meet the data needs from social science. The latest (August 2020) data distributed are the balanced panel of 250 Si-Gun-Gu in South Korea for 2001-2018. The weather variables in this data are directly applicable to other social science topics, which are not limited to air pollution research.

• Plant Resources
• /
• v.6 no.2
• /
• pp.114-119
• /
• 2003

In this study, an on-site survey was conducted around Gasado island at Jodo-myeon, Jindo-gun, Jeonnam during July 2 to 25, 2002. The naturalized plants investigated in the surveyed sites were revealed 15 families and 39 species, including Althaea rosea and Oxalis articulata, which are ornamental plants. Only 10 species appeared in Imjado island among the surveyed sites the surveyed sites and Imjado Island, including Elymus sibiricus, Lolium perenne, Chenopodium album, Oxalis articulata, Oxalis corymbosa, Oenothera odorata, Xanthium strumarium, Bidens frondosa, Ambrosia artemisiaefolia var. elatior, and Taraxacum officinale. 6 species were distributed only in Gasado island, Jindo-gun, which included include Festuca myuros, Chenopodium ambrosioides, Amorpha fruiticosa, Malva neglecta, Calendula arvensis, and Carthamus tinctorius. 18 species were showed in Soheuksan island.; Yeosu area, 29 species; Imja Island in Sinan-gun, 34 species, and Gasado Island in Jindo-gun revealed 39 species. It is believed that the species of naturalized plants have been expanded compared to the other areas because of close location to the inland and large population fastiy. The Urbanization Index(UI) of this area was found to be 19.5. The naturalized plant communites in these surveyed sites were classified into Rumex crispus, Elymus sibiricus, and Lolium perenne community according to the vegetation table. Furthermore, they formed a community around areas that received great artificial influence from human dwellings or roads due to the characteristics of species distribution

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.69-74
• /
• 1992

This paper describes the energy and speed characteristics of an induction coil-gun. The coil-gun has some merits that it can be easily installed and repeatedly used many times, it does not damage mechanically in the course of launch and the force exerted on the projectile is distributed uniformly. An equivalent circuit is employed for modeling the coil-gun. The circuit equations and equation of motion are then derived based on the equivalent circuit. These equations are solved numerically by using Runge-Kutta method. Finally the energy transfer ratios are obtained according to the variations of the resonant frequency of driving circuit and charging voltage of capacitors. The muzzle velocities of projectile are also obtained according to the variations of electrical conductivity and initial position of projectile, firing angle of driving circuit, charging voltage of capacitor and resistance of driving coil, respectively.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.5
• /
• pp.523-532
• /
• 2006

This study evaluated the evaluate nutrient knowledge of child care teachers and assessed the nutritional level of snacks served in 18 child care centers in Tean-Gun. The survey sample was 18 child care teachers working in 18 child care centers of Tean-Gun. The questionnaire requested information about demographic factors, nutritional knowledge, management status of snacks, and the kinds and serving size of snacks served for 1 week. Data were analyzed using SPSS for windows(version 12.0) and nutritional values were assessed using Can-pro 2.0. The mean score of teachers' nutritional knowledge was 22 out of 30 points. The scores were low in the questions regarding the ease with which Ca and re deficiencies can be developed in infants. The contents of most nutrients supplied from the snacks exceeded 15% of RI(Recommended Intake) but there were significant differences in the contents of energy (p<0.05), protein (p<0.05), fat (p<0.05), carbohydrate (p<0.05) and calcium (p<0.001) between the child care centers. Especially, the difference of calcium between the child care centers was 344.84 mg. These results indicate that a program of relevant nutritional education focusing on snacks needs to be developed for child care teachers, with a special recognition on correct calcium level.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.6
• /
• pp.971-976
• /
• 2012

A 150 kJ compact capacitive pulsed power system (CCPPS) capable of delivering electrical energy into an electrothermal chemical (ETC) gun on a vehicle has been studied. The CCPPS provides pulsed electrical energy into a capillary plasma injector which generates plasma of tens of thousands $^{\circ}K$ in temperature and has a nonlinear resistance depending on the current. The design requirements of the CCPPS are as follows: the maximum power of 250 MW, the pulse width of about 0.6 ms, the volume of no more than 0.5 cubic meter, the efficiency of energy transfer over 80 % and the repetition rate of 4~5 times per minute. The constructed CCPPS is composed of four 37.5 kJ capacitor bank modules in parallel to make a trapezoid pulse shape and to satisfy the design requirements. Each module is designed to achieve high reliability, safety, efficiency and energy density to endure severe operating conditions. The results of the performance test on the CCPPS using a 120 mm ETC gun are described.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.6
• /
• pp.618-625
• /
• 2005

This paper has achieved that an optimal design and experiments of heater and cathode of electron gun that serve to embody high current density in CRT display. For the high brightness, high resolution and larger size in CRT display, high current density of electron gun is indispensible. An Impregnation style cathode is used, and must heighten operating temperature of heater to get high current density for this, it is proportional hereupon and power dissipation increases. In this paper, to get low power cathode with high current density, There are produced and tested sample that differ lead type of heater, coating method, the pitch and number of winding of the first and second coiling in the heat emission area for the low power design of high current density cathode heater in this paper.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.401-402
• /
• 2006

All-surface, all-tooth machining and roll forming of cast iron have been used to manufacture the crankshaft position sensor wheel (CPSW). However, these methods pose many problems such as difficult processing, high material cost, and low tooth precision. Thus, we developed a sintered CPSW with an improved detection ability in order to resolve the problems related with the previous methods of manufacturing CPSW by simplifying the process flow and improving tooth precision. The sintering process is introduced in this study. We conducted an experiment to compare the sintered and roll formed products and analyzed the results to evaluate the reliability of the sintering process. Furthermore, we compared and analyzed stress and displacement in the sintered and roll formed products through the "Finite Element Method(FEM)". According to the experimental and FEM results, the sintered product showed satisfactory mechanical properties. It was less expensive to process and lighter and showed better quality than the roll formed product. The results of this study could be applied to design an optimum CPSW using the sintering process.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.10 no.3
• /
• pp.208-216
• /
• 2007

As the propellant mass is being accelerated out of the gun chamber along with the projectile, a continuous pressure gradient exists between the end of chamber and the base of the projectile. For this reason, the base pressure-travel curve is very important to design a conventional gun barrel in the interior ballistics, but it is not obtained briefly by empirical or theoretical method. In this paper, a simple relation between chamber pressure and base pressure was determined by the factor of base pressure(Cb) obtained from the experimental method. The simple relation gives a reasonable prediction for the reduction of pressure between the breech and the base of projectile owing to the axial gradient in the gun tube. The predictions have been validated by the infrared screen sensor and the PRODAS(PROjectile Design and Analysis System) for interior ballistic systems. Therefore, the base pressure-travel curve could be calculated from the chamber pressure measured by piezoelectric sensor. The base pressure-travel curve obtained from the simple relation offers initial information to gun barrel designer and is used for calculation of muzzle velocity.

• Journal of Ocean Engineering and Technology
• /
• v.22 no.1
• /
• pp.46-52
• /
• 2008

Lately Gun-Jang Harbor has undergone a drastic change in hydraulic characteristics due to newly added harbor protection measures, like a wharf and breakwater. The wharf and breakwater, with a training dike, were constructed to keep enough depth far navigation. They make the plan view of Gun-Jang Harbor semi closed and very elongated, which makes it very vulnerable to seiche. Hence it is an urgent task to unveil the hydraulic characteristics, like seiche, for the optimal operation of the new harbor system. In this study, we numerically analyze the seiche characteristics of Gun-Jang Harbor over the $10-4{\sim}10-3$ Hz frequency range, considering that wind waves due to seasonal winds are the most prevailing during winter in the West sea. As a wave driver, we use Mild Slope Eqs. and numerically integrate these using FEM based on Galerkin weak formulation. It turns out that the 1st, 2nd, 3rd and 4th eigen models are over 0.0009 Hz, 0.0013 Hz, 0.0017 Hz and 0.002 Hz.