• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.111-111
• /
• 2012

In this talk, we represent a novel approach to investigating intra-nanorod surface plasmon coupling with control over block compositions. The multi-component rod-like nanostructures, which consist of optically active components (Au and Ag) and optically less active component (for example, Ni) in UV-vis-NIR spectral window, showed interesting optical response depending on each block length and the total length of the structure. By controlling the composition and relative lengths of the blocks that comprise these structures, we can tailor the overall optical properties. Depending on the relative fraction of Au and Ag blocks, the intensity of the transverse modes varied without noticeable peak shifts. However, the strong intraparticle surface plasmon coupling resulted in the collective appearance of longitudinal LSP modes, including higher-order modes. The experimental observations were confirmed by theoretical calculation, using a discrete dipole approximation method. In addition, we will briefly discuss how single nanorod solar cells can be synthesized by using by using electrochemical deposition and AAO hard templates.

• 설비공학논문집
• /
• 제13권3호
• /
• pp.209-216
• /
• 2001

A numerical study is peformed to investigate the effect of circumferential velocity generated by the guide vane on the nozzle flow of a jet fan, s a way of increasing the penetration force of jet fan with nozzle of 175mm diameter. For the validation of numerical results. the velocity is measured by a 5-hole pitot tube and flow visualization is conducted by the tuft method. Under the inlet condition that the maximum circumferential velocity in the stator outlet of the present jet fan is 1.8m/s, the axial velocity in the nozzle outlet has the feature that the velocity at the axis is low and the velocity near the wall high. Therefore, to increase the throw length of the jet fan, the configuration of the fairing and nozzle needs to be developed and the precise revise of the stator angle is required, In addition, the bigger the circumferential velocity, the smaller the axial velocity at the axis and the bigger non-uniformity of the flow distribution.

• Journal of Yeungnam Medical Science
• /
• 제33권1호
• /
• pp.52-55
• /
• 2016

Guide wire fracture during percutaneous coronary intervention (PCI) is rare. It can cause fatal complications such as thrombus formation, embolization, and perforation. Guide wire fracture could occur during intervention for severely calcified stenotic lesions, and rarely from distal small branches of stenotic lesions. There are several methods for its management depending on the material character, position, length of the remnant, and the patient's condition. If percutaneous retrieval was not achieved, the surgical procedure should be considered for prevention of potential risks, although the remnant guide wire does not usually cause complications. We experienced a patient with a guide wire fracture during PCI, and managed to prevent its complications through surgical removal of the remnant wire. We report this case here.

• 구강회복응용과학지
• /
• 제19권4호
• /
• pp.317-323
• /
• 2003

When making crown and bridges on anterior regions, many practitioners consider the esthetics the most. For this reason functional aspect are not considered as much as the esthetics. If the occlusion on the anterior region are not formed correctly, movement of the temporomandibular joint can be disturbed and excessive stress can be occur that pathologic condition can be under lied. On this case presentation will show the importance of the anterior guidance and suggest the appropriate protocol of using customized anterior guide table. A 45years old male had to remake both of the upper central and lateral PFM because of the porcelain fracture. The new PFM crowns were made conventional methods without considering the anterior guidance. After the temporary setting, the patient complained of discomfort and short looking upper anteriors. To solve these problems we had to restore the palatal contour and length of the new crowns by making customized anterior guide table using temporary crowns that contains patient's old anterior guidance. This procedure which is copying the pt's comfortable anterior guidance to the final prosthesis made them to be esthetic and patients to feel comfortable.

• Nuclear Engineering and Technology
• /
• 제55권3호
• /
• pp.1045-1051
• /
• 2023

In this study, we fabricated a liquid light-guide-based radiation sensor with a LaBr₃:Ce scintillator for remote gamma-ray spectroscopy. We acquired the energy spectra of Cs-137 and Co-60 using the proposed sensor, estimated the energy resolutions of the full energy peaks, and compared the scintillation light output variations. The major peaks of the radionuclides were observed in each result, and the estimated energy resolutions were similar to that of a general NaI(Tl) scintillation detector without a liquid light guide. Moreover, we showed the relationships of energy resolution and analog-to-digital channel regarding the number of photoelectrons produced and confirmed the effects of light guide length on remote gamma-ray spectroscopy. The proposed sensor is expected to be utilized to perform remote gamma-ray spectroscopy for distances of 3 m or more and would find application in many fields of nuclear facilities and industry.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.205-212
• /
• 2013

본 논문에서는 열간 조압연에서 사용되는 사이드 가이드가 소재의 선 후단부 캠버에 미치는 영향에 대해서 고찰한다. 먼저 실제 열간 압연된 소재의 표면 온도 분포를 열화상 카메라로 측정한다. 이 온도 측정 결과를 유한요소해석에 반영하여 열간 소재의 비대칭 열변형 거동을 고찰한다. 사이드 가이드에 관련된 변수로써 사이드 가이드의 설치 위치, 사이드 가이드의 길이, 사이드 가이드와 소재 사이의 측면 갭을 선택하였다. 캠버의 크기가 더 큰 쪽에 사이드 가이드를 설치하는 것이 더 효과적이라는 정량적인 결과를 도출하였다. 사이드 가이드가 길면 길수록 캠버를 줄이는데 더 효과적이며, 사이드 가이드와 소재 사이의 갭을 줄이면 줄일수록 캠버의 크기를 비례적으로 줄일 수 있다는 결과도 정량적으로 입증하였다.

• 대한관절경학회지
• /
• 제3권2호
• /
• pp.97-101
• /
• 1999

목 적 : 각 환자의 슬개건 길이, 터널간 길이, 경골 터널 길이, 경골 골편의 길이를 측정하여 이식물과 터널 길이의 부조화를 예방하는 수기를 찾고자 하였다. 대상 및 방법 : 1997년 3월부터 1999년 6월까지 골-슬개건-골을 이용하여 전방십자인대 재건술을 시행 받았던 환자 15례를 대상으로 하였다. 수술시 Tibial Tunnel Guide의 각도는 $40^{\circ}$(Acufex, MA, USA)로 고정하였으며, 터널간 길이(X), 경골 터널 길이(T), 슬개건 길이(N), 경골 골편 길이(Y)를 측정하였다. 대퇴골 터널 길이(F)와 슬개골 골편 길이(P)는 공히 25mm로 일치시켰다. 터널 길이 부조화를 예방하기 위해 임의적으로 조절이 용이한 경골 골편의 길이는 경골 터널 길이와 터널간 길이를 합하여 슬개건 길이를 뺀 단순 공식(Y=X+T-N)으로 계산하였다. 결 과 : 대상환자에게 측정한 지표들의 평균값은 터널간 길이(X) $23.4{\pm}1.4mm$, 경골 터널 길이(T) $43.6{\pm}1.7mm$, 슬개건 길이(N) $40{\pm}2.4mm$, 경골 골편 길이(Y) $27{\pm}2.4mm$였다. 결 론 : 저자들의 방법은 터널의 총길이를 측정한 후 이식물의 총길이를 경골 골편 길이로 조정함으로써 경골터널 내에서의 이식물-터널 길이 부조화를 방지할 수 있었다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 학술대회
• /
• pp.148-154
• /
• 2008

Diverging channel from gas burner exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW system. To improve the uniformity in velocity and temperature distribution of existing design(Case A and B) of 300 kW HRSG system, two additional test geometries have been chosen for the numerical simulation. At first, gas burner exit section has been centered to the inlet section of boiler(Case C) and uniformity has been improved considerably. Secondly, the diverging channel length can be further reduced for compact geometry with new guide vane design (Case D and E). Proposed design shows overall improvement in uniformity in velocity and temperature distribution compared to existing one.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.179-183
• /
• 2000

This paper is concerned with achieving the high motion accuracy of linear motion bearing guide according to estimate accuracy average effect of bearing. Accuracy average effect can be obtained b analysis the relationship between motion error of the table and spatial frequency of the rail form error. And influences of ball diameter, ball number, and clock length on block motion error and block number on the table motion error are analyzed theoretically. In addition to, a simple experiment is performed in order to verify theoretical result.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.1-8
• /
• 2009

Diverging channel from gas engine exit to the inlet section of Heat Recovery Steam Generator (HRSG) has been re-designed for 1 MW system. To improve the uniformity in velocity and temperature distribution of existing design(Case A and B), two additional test geometries have been chosen for the numerical simulation. At first, gas burner exit section has been centered to the inlet section of the boiler(Case C) and uniformity in velocity and temperature distribution has been improved considerably. Secondly, the diverging channel length can be further reduced to compact geometry with new guide vane design (Case D and E). Proposed design shows overall improvement in uniformity in velocity and temperature distribution compared to existing one.