• Nuclear Engineering and Technology
• /
• v.50 no.2
• /
• pp.297-305
• /
• 2018

Fuel assembly (FA) bow in pressurized water reactor (PWR) cores is considered to be a complex process with a large number of influencing mechanisms and several unknowns. Uncertainty and sensitivity analyses are a common way to assess the predictability of such complex phenomena. To perform such analyses, a structural model of a row of 15 FAs in the reactor core is implemented with the finite-element code ANSYS Mechanical APDL. The distribution of lateral hydraulic forces within the core row is estimated based on a two-dimensional Computational Fluid Dynamics model with porous media, assuming symmetric or asymmetric core inlet and outlet flow profiles. The influence of the creep rate on the bow amplitude is tested based on different creep models for guide tubes and fuel rods. Different FA initial states are considered: fresh FAs or FAs with higher burnup, which may be initially straight or exhibit an initial bow from previous cycles. The simulation results over one reactor cycle demonstrate that changes in the creep rate and the hydraulic conditions may have a considerable impact on the bow amplitudes and the bow patterns. A good knowledge of the specific creep behavior and the hydraulic conditions is therefore crucial for making reliable predictions.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.10
• /
• pp.1225-1231
• /
• 2014

This paper presents the performance characteristic of a Francis hydro turbine with an inline casing. This turbine is designed for city water supply system. Due to large changes in ground elevation with high points and low points, some systems may experience larger-than-normal required pressures in areas with low ground elevations. One way to dissipate these excess pressures is by the use of an inline-turbine instead of an inline-pressure reducing valve. For best applicability and minimal space consumption, the turbine is designed with an inline casing instead of the common spiral casing. As a characteristic of inline casing, the flow accesses to the runner in the radial direction, showing a low efficiency. The installation of vanes improves the internal flow and gives the positive encouragement to the output power. For the power transmission to the outside of the turbine casing from the runner axis, a belt passage is designed in the inline casing, as its influence, the region after the belt passage shows a relatively low output power. The clearance gap in the runner side space is considered, in which a small volume of flow is contracted into the clearance gap, forming the leakage flow. The leakage flow leads to a decrease in the efficiency.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.12 s.255
• /
• pp.1611-1617
• /
• 2006

A compact and two-dimensional atomic force microscope (AFM) using an orthogonal sample scanner, a calibrated homodyne laser interferometer and a commercial AFM head was developed for use in the nano-metrology field. The x and y position of the sample with respect to the tip are acquired by using the laser interferometer in the open-loop state, when each z data point of the AFM head is taken. The sample scanner which has a motion amplifying mechanism was designed to move a sample up to $100{\times}100{\mu}m^2$ in orthogonal way, which means less crosstalk between axes. Moreover, the rotational errors between axes are measured to ensure the accuracy of the calibrated AFM within the full scanning range. The conventional homodyne laser interferometer was used to measure the x and y displacements of the sample and compensated via an X-ray interferometer to reduce the nonlinearity of the optical interferometer. The repeatability of the calibrated AFM was measured to sub-nm within a few hundred nm scanning range.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.249-255
• /
• 2019

Currently, most small theaters in Korea are not equipped with fire escape prevention laws unlike large theaters. The small theater is a place where many people stay in a small space, which can lead to a great deal of damage in the event of a fire. Therefore, we propose an efficient evacuation method using the evacuation behavior of the crowd as a way to minimize the casualties in case of a fire in a small theater.

• English Language & Literature Teaching
• /
• v.17 no.3
• /
• pp.119-139
• /
• 2011

Free-talking in Korea has recently been emphasized as a way of improving students' speaking ability outside of the classroom. The purpose of this study is to examine perceptions of free-talking, to understand what type of roles were played by or allotted between Korean students and international professors (IPs) and to look for effective speaking strategies for utilizing free-talking. Participants of this study were 68 university students and 23 IPs. The data collected through a survey type of questionnaire were analyzed by this researcher and the main findings indicate that students and IPs have somewhat different viewpoints about their concepts of free-talking. Students expressed varying viewpoints depending on their experience and class (year). In terms of the benefits, usefulness, and satisfaction of free-talking, students and IPs seem to be in more agreement with each other although the two groups have conflicting perceptions in the particular operation of free-talking, especially in terms of preparation and feedback. Students stated that they feel anxious, nervous, and that they struggle with peer pressure while free-talking. However, they feel that through free-talking they build up confidence and increase their speaking ability. Regarding roles, most professors play a helpful role as a guide or facilitator while students want professors to provide more suitable materials and to tutor them by means of appropriate feedback and strategies as well-prepared teachers like a prompter, participant or tutor in the timely manner. Finally, this paper proffers a few practical suggestions for activating free-talking and a discussion of the pedagogical implications.

• Journal of Contemporary Eastern Asia
• /
• v.17 no.1
• /
• pp.94-111
• /
• 2018

This study examines Korea's international development volunteer program as a citizen diplomacy initiative. Informed by a cultural perspective of transmission and relational models of public diplomacy, I examine the ways in which volunteer training incorporates cultural-learning into its program. The study finds that volunteer training is largely based on an instrumentalist approach to culture that places emphasis on learning the "explicit" side of culture, such as Korean traditional dance, art, and food as a strategy to promote the country's national image. In contrast, much less covered in the training program is a relational approach to culture-learning that is guided by a reflexive understanding of the "implicit" side of culture, or the values and beliefs that guide the worldviews and behavior of both volunteers and host constituents. Whereas the value of the volunteer program as a citizen diplomacy initiative is in its potential to build relationships based on two-way engagement, its conception of culture is mostly guided by that of the transmission model of public diplomacy. Based on the findings, this study calls for an integrated approach to culture-learning in volunteer training program to move the citizen diplomacy initiative forward.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.8
• /
• pp.99-105
• /
• 2010

Because in the amusement park, a number of people use various vehicles facilities complicated arraigned, it needs an effective way to search optimal path to reduce errors in touring a park. Particularly, when choosing a facility, searching a waiting time-based path as well as shortest path is important. This paper presents a path recommendation system which minimizes total park tour time based on tour distance and waiting time through GPS and wireless internet. This system can also recommend customized tour path based on the characteristics of user members as well as a simple shortest path.

• Journal of Korea Multimedia Society
• /
• v.14 no.1
• /
• pp.133-143
• /
• 2011

This paper proposes a mobile navigation system which haptically presents the way to go to visually impaired persons. In order to convey the tactile information to the visually impaired persons, we develop a new tactile module with a solenoid, a permanent magnet and an elastic spring. Furthermore, we suggest 2D vibration flow which originates from one point and gradually propagates to other points on a surface of the haptic navigation system. The tactile module and the vibration flow method are incorporated into the proposed haptic navigation system and they stimulate the user's finger pad and palm, respectively. We conduct experiments to investigate that the proposed navigation system haptically provides the direction to the users. From the experimental results, we verify that the proposed system can generate enough tactile sensation to guide the direction to go in real-time.

• Structural Engineering and Mechanics
• /
• v.25 no.1
• /
• pp.1-20
• /
• 2007

Dynamic behaviors of the contact surface between ball and raceway in a guideway mechanism vary with the applied loads and hence affect the mechanical responses of machine tools. The study aims to investigate the nonlinear characteristics of dynamic behaviors at the rolling contact interface in linear guideway mechanisms. Firstly, analytical method was introduced to understand the contact behaviors based on Hertz contact theory in a point-to-point way. Then, the finite element approach with a three-dimensional surface-to-surface contact model and appropriate contact stiffness was developed to study the dynamic characteristics of such linear guideways. Finally, experiments with modal test were conducted to verify the significance of both the analytical and the numerical results. Results told that the finite element approach may provide significant predictions. The study results also concluded that the current nonlinear models based on Hertz's contact theory may accurately describe the contact characteristic of a linear guideway mechanism. In the modal analysis, it was told that the natural frequencies vary a little with different loading conditions; however, the mode shapes are changed obviously with the magnitude of applied loads. Therefore, the stiffness of contact interface needs to be properly adjusted during simulation which may affect the dynamic characteristics of the machine tools.

• Journal of the Korean Institute of Educational Facilities
• /
• v.11 no.1
• /
• pp.25-37
• /
• 2004

This study is derived from a problem for the blind, how to recognize the space and how to find their way. Unlike ordinary people, the disabled people are closely related with special constructor environment using the other sense. Especially, to find his/her location, each person depends on the wayfinding ability as acquiring specific and various information,(e.g. recognizing figure by tactile sense, space size by auditory sense, direction by light from a window and regular noise, and existence of switch in a specific place.) Those senses help the person's wayfinding to his/her destination. The procedure of wayfinding are location, position, orientation, navigation, and movement. Consequently, construction for the people above mentioned can offer a design-guideline considering following factors, building arrangement considering regular noise, refurbishment, plan configuration of floor and wall-skin changed, circulation stream that maintains right angle by the regular noise in the building, enforcement location character by the inflow of the light into a crossing.