• 한국결정성장학회지
• /
• 제3권1호
• /
• pp.1-11
• /
• 1993

초크랄스키 법에 의한 실리콘 단결정 성장시 액상내의 난류 특성 억제 및 산소, 첨가제 등의 제어를 위해 보통 자기장을 걸어주고 있으며 본 연구에서는 축방향 자기장을 걸어주었을 경우 나타나는 자장의 효과를 수치적으로 계산하였다. 자기력의 증가에 따라 액상내의 유속의 크기는 상당히 억제되었다. 자장의 크기가 증가함에 따라 중심축 부근에서 상승하는 유동의 속도가 감소하기 때문에 S/L 응고계면은 점점 평탄해졌으며, B=0.3 Tesla에서 액상내의 온도 분포는 중심축 부근을 제외하고는 오직 전호 효과로만 계산된 결과와 거의 유사하였다. 또한 고상 및 액상 표면을 통한 열방출량 중 Ar 가스에 의한 열방출량은 3% 미만이었으며 대부분의 열량은 복사를 통해 방출되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 3차
• /
• pp.81-85
• /
• 2010

The medicinal plant, Kanzo (Glycyrrhiza uralensis), mainly grows on arid lands. The root of Kanzo has been compounded about 70% of herbal medicines in Japan because it has an important medicinal element. In addition, in recent years, the expansion of desertification becomes a serious problem. The cause is chiefly man activity such as over gathering plants1). The aim of this study is to prevent desertification by cultivating Kanzo with high quality. The first step is to grow Kanzo for greening. The second step is to stably produce the root with high medicinal quality. This paper presents growth properties of cultivating Kanzo by bottom watering method, which is under constant groundwater level. The main results of this paper are as follows: (1) The lower water content of cultivating soil is, the longer the root length is, (2) Growth of Kanzo is influenced by soil types, (3) Thick primary roots grow directly and vertically in low water content. On the other hand, thin secondary roots grow curvedly and horizontally in high water content and (4) Measuring evapo-transpiration velocity is the effective method to evaluate roots' growth tendency in the field.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.357-363
• /
• 2019

We investigated a synthesis yield and diameter distribution of single-walled carbon nanotubes (SWNTs) with respect to the growth position in a horizontal chemical vapor deposition (CVD) chamber. Thin films and line-patterned Fe films (0.1 nm thickness) were prepared onto ST-cut quartz substrates as catalyst to compare the growth behavior. The line-patterned samples showed higher growth density and parallel alignment than those of the thin film catalyst samples. In addition, line density of the aligned SWNTs at central region of the chamber was 7.7 tubes/㎛ and increased to 13.9 tubes/㎛ at rear region of the CVD chamber. We expect that the enhanced amount of thermally decomposed feedstock gas may contribute to the growth yield enhancement at the rear region. In addition, the lamina flow in the chamber also contribute to the perfect alignment of the SWNTs based on the value of gas velocity, Reynold number, and Knudsen coefficient we employed.

• Annals of Pediatric Endocrinology and Metabolism
• /
• 제23권4호
• /
• pp.176-181
• /
• 2018

Noonan syndrome (NS) is an autosomal dominant disorder that involves multiple organ systems, with short stature as the most common presentation (>70%). Possible mechanisms of short stature in NS include growth hormone (GH) deficiency, neurosecretory dysfunction, and GH resistance. Accordingly, GH therapy has been carried out for NS patients over the last three decades, and multiple studies have reported acceleration of growth velocity (GV) and increase of height standard deviation score (SDS) in both prepubertal and pubertal NS patients upon GH therapy. One year of GH therapy resulted in almost doubling of GV compared with baseline; afterwards, the increase in GV gradually decreased in the following years, showing that the effect of GH therapy wanes over time. After four years of GH therapy, ~70% of NS patients reached normal height considering their age and sex. Early initiation, long duration of GH therapy, and higher height SDS at the onset of puberty were associated with improved final height, whereas gender, dosage of GH, and the clinical severity did not show significant association with final height. Studies have reported no significant adverse events of GH therapy regarding progression of hypertrophic cardiomyopathy, alteration of metabolism, and tumor development. Therefore, GH therapy is effective for improving height and GV of NS patients; nevertheless, concerns on possible malignancy remains, which necessitates continuous monitoring of NS patients receiving GH therapy.

• 한국추진공학회지
• /
• 제8권3호
• /
• pp.37-43
• /
• 2004

증기발생기 슬러지 세정을 위한 고압분사 실험의 분류궤적에 대한 가시화 및 속도분포를 측정함으로써 최적의 노즐형상을 찾기 위하여 플랜져방식의 고압펌프(사용압력 : 200 kg/$\textrm{cm}^2$, 15HP, 11kW. 토출유량 Q : 301/min)를 이용하였다. 가시화를 통하여 정성적인 분포를 비교분석할 수 있었고, 분류의 속도분포등을 통하여 노즐 형상비에 따른 유동의 차이를 2차원 PDPA 광학 계측장비를 사용하여 분석하였다. 고압 분사시 형상비에 관계없이 모든 경우에 있어서 중심축을 따라 모든 궤적들은 거의 유사함을 보였으나, 분류 중심에서 벗어난 외곽영역에서는 많은 차이가 있음을 알 수 있었다 이는 형상 비에 따른 주변 공기와의 마찰 및 분류 유입현상 때문이라 여겨진다.

• 한국환경과학회지
• /
• 제10권1호
• /
• pp.65-71
• /
• 2001

HRP(high rate pond) which had kept the manufactured clay of 3cm-thickness as benthic clay in reactor and the 6 flat-blade turbine as impeller for agitation was named HRASP(high rate algae stabilization pond). And the experiment for treatment of artificial synthesis wastewater containing COD :300mg/$\ell$, NH$_3$-N : 300mg/$\ell$, T-P : 9mg/$\ell$ as nutrients was been performed successfully. This reactor was been operated under conditions : 24hrs.-irradiation and water temperature, $25^{\circ}C$ and pH 7 and agitation velocity, 15, 30, 45rpm and the effect of agitation velocity on algal bioaccumulation of nutrients was been studied with view point of fluid dynamics. The next followings could be obtained as results. 1. The agitation with a turbine impeller blade in HRASP makes clay particle indicate superior suspension effect by means of forming of excellent curl/shear flow in reactor. 2. The excessive suspension of clay particle which is created at 45rpm as rotation velocity of impeller blade of turbine disturbs the light penetration and algal photosynthesis reaction. 3. Efficiencies for removal of nutrients come out as COD : 93.9%~94.3%, ($NH_3-N + NO_3-N$) : 81.9%~99.0%, T-P : 46.8%~53.6%. 4. Kuo values of $K_1$for algal growth come out seperately as 15rpm : $1.876{\times}10^{-2}, 30rpm : 4.618{\times}10^{-3}$. 5. Kuo values of $K_2$for removal of N, P come out seperately as 15rpm : $8.403{\times}10^{-1}$ and $1.397{\times}10^{-1}$, 30rpm : $4.823{\times}10^{-1} and 2.052{\times}10^{-1}$. 6. It can be guessed easily that the excessive agitation can inhibit the algal and bacterial symbiotic reaction if it is considered that micro organism\` sense to preservation of life is relied on natural function of metabolism. Therefore the studies for this matter should be followed continuously.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.250-255
• /
• 2000

Damage induced by low velocity impact loading in aircraft composite laminates is the form of failure which is occurred frequently in aircraft. Low velocity impact can be caused either by maintenance accidents with tool drops or by in-flight impacts with debris. As the consequences of impact loading in composite laminates, matrix cracking, delamination and eventually fiber breakage for higher impact energies can be occurred. Even when no visible impact damage is observed, damage can exist inside of composite laminates and the carrying load of the composite laminates is considerably reduced. The reduction of strength and stiffness by impact loading occurs in compressive loading due to laminate buckling in the delaminated areas. The objective of this study is to determine inside damage of composite laminates by impact loading and to determine residual compressive strength and the damage growth mechanisms of impacted composite laminates. For this purpose a series of impact and compression after impact tests are carried out on composite laminates made of carbon fiber reinforced epoxy resin matrix with lay up pattern of $[({\pm}45)(0/90)_2]s$ and $[({\pm}45)(0)_3(90)(0)_3({\pm}45)]$. UT-C scan is used to determine impact damage characteristics and CAI(Compression After Impact) tests are carried out to evaluate quantitatively reduction of compressive strength by impact loading.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1165-1172
• /
• 2009

두 개의 평판이 직각으로 만나는 corner에서 형성되는 층류 경계층을 입자영상유속계 기법을 이용하여 측정하였다. 자유류 유속은 2.96 ~ 3.0 m/s, 층류 경계층이 형성 될 수 있도록 모델에 대한 유동의 입사각을 1.2도로 하여 작은 순 압력구배를 제공하였다. 모델의 앞전은 둥근 형상으로 처리하였으며 모델의 길이는 약 1000mm이다. 측정 결과는 이등분면에서 corner 경계층의 전형적인 특징인 변곡점을 가지는 박리형 속도 분포를 보여주었다. 이등분면에서 멀어져 감에 따라 속도 분포는 평판의 Blasius 분포로 변해가고, 이등분면 경계층 두께의 약 절반만큼 평판을 따라 멀어지면 변화가 완료된다. 앞전에서부터 하류로 감에 따라 이등분면에서의 경계층 성장 및 속도 분포의 유사 상사성을 측정 결과로부터 확인하였다.

• 비파괴검사학회지
• /
• 제21권1호
• /
• pp.32-38
• /
• 2001

재료의 손상을 평가하기 위하여 초음파법에 대한 많은 연구가 진행되었고 널리 사용되고 있으나 대부분 균열의 성장 또는 두께의 감소와 같은 문제에 집중되고 있다. 본 연구에서는 2.25Cr-1Mo 강을 이용하여 반복하중에 의해 재료내부에 발생하는 미시균열을 조기에 감지하고, 피로에 의한 파괴를 미연에 방지할 수 있도록 초음파 표면파의 감쇠와 속도변화를 이용하여 균열길이 측정의 정량적인 평가방법을 제시하였다. 중심주파수 5MHz의 탐촉자를 이용하여 파단수명비 약 60%, 균열길이 약 2mm 정도에서 표면파의 속도 및 감쇠 변화를 탐지할 수 있었다. 고주파 탐촉자를 이용함으로써 미시균열의 발생을 조기에 탐지할 수 있으며, 파단수명을 예측하는 기초자료로 활용할 수 있다.

• 대한치과교정학회지
• /
• 제7권1호
• /
• pp.13-22
• /
• 1977

The author investigated the timing of land and wrist ossification events taking place in the hamate and pisiform by means of roentgenographic examination and its relation to the peak growth velocities in body height. Materials obtained included 493 sheets of X-ray films taken from 257 boys ana 236 girls aged between 7 and 17 years lived in Seoul area. The results indicate that; 1) The average ages at occurrence of initial ossification of the hook of the hamate were 12 years 3 months in boys and 10 years 1 month in girls. 2) The average ages at which advanced ossification of the hook of the hamate occurred were 13 years 7 months in boys and 11 years 11 months in girls. 3) Initial ossification of the pisiform appeared at 13 years 0 month in boys and 10 years 2 months in girls. 4) All three ossification events in hand and wrist, and peak growth velocity in body height occurred earlier in girls than in boys. 5) Initial ossification in the hook of the hamate and pisiform preceded or coincided with peak growth in body height in most boys and girls, on the other hand, advanced ossification in the hook of the hamate occurred around peak growth in body height but in girls did it after peak growth in body height. 6) It would appear that initial ossification in the hook of the hamate or in the pisiform, both for boys and girls, provides a better indication of approaching peak adolescent growth in body height. 7) Advanced ossification in the hook of the tamale would indicate that the period of cercumpuberal peak growth had teen entered or finished.