• Journal of the Semiconductor & Display Technology
• /
• v.14 no.1
• /
• pp.19-25
• /
• 2015

Strengthened glass is widely used in the display industry for the smart phone and the tablet PC's, the market of which shows steady growth. The strengthened glass is prone to the fracture due to the machined surface defects such as crack and notch. The surface defects are caused mostly by the vibrations of the laser cutter. In this study, the vibrations of the laser cutter were investigated through the frequency response experiment and the computer simulation. The main reasons of the structural vibrations were analyzed, and further the design alterations were deduced and applied to the machine to check the effects of those alterations and to eventually improve the structural stability. The result shows that simple design modifications without major structural change can substantially suppress the vibrations, and improve the quality of the machined surface.

• IE interfaces
• /
• v.15 no.2
• /
• pp.152-158
• /
• 2002

The explosive growth of the internet traffic in the last few years has imposed tremendous stress on today's routers, particularly in the core network. Recently, ATM LSRs(Label Switching Router) are potentially capable of providing the highest forwarding capacity in the backbone Internet network. VC merging is a mechanism in an ATM LSR that allows many IP routes to be mapped to the same VC label, and provides a scalable mapping method that can support thousands of destinations. VC merging requires reassembly buffers so that cells belonging to different packets intended for the same destination do not interleave with each other. In this study, we propose an architecture of the ATM LSR which supports VC merging. We propose traffic control scheme called APD(Active Packet Discard) algorithm so that predicts and controls the congestion of the Internet traffic effectively. We study the performance of this algorithm using simulation.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.2
• /
• pp.295-303
• /
• 2009

Forging of square spline was investigated by using finite element methods in this study. Spline is widely used by torque transmitter in the fields of automobile, aircraft, and shipping etc. Friction on the surface of die is regarded as the most important factor to improve the dimensional accuracy for complete forming of spline teeth. Finite element simulation was carried out to improve the formability of the spline, especially remove unnecessary burrs which were extruded in gap between the die and the punch. To remove the burrs, various friction factors are considered on the surfaces of the die in the simulations and punch flat surface was designed. The simulated results were compared with experimental ones. As a results, it is possible to control the growth of burrs and improve formability of spline teeth by applying various friction factors and design of punch flat surface.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.370-373
• /
• 2000

In this work, an extractive membrane bioreactor containing coulture broth of Burkholderia cepacia G4 PR1 constitutively expressing the TCE-degrading enzyme, tolune-ortho-monooxygenase(TOM), was used for the degradation of TCE. The membrane bioreactor operates by seperating the TCE-containing waste gas from the aerated biomedium, by which the air-stripping of TCE without degradation was overcome that could occur in conventional aerobic biological treatments of TCE-contaminated waste gases. This was achieved by a silicone rubber membrane which was coiled around a perspex draft tube. TCE from the gas phase diffuses across the silicone rubber membrane into microbial culture broth that was continuously fed from a separate aerobic CSTR. Therefore, TCE degradation occured without the TCE being directly exposed to the aerating gas stream. Of the TCE supplied to the membrane bioreactor, 72.6% was biodegraded during the operation of this system. To construct a mathematical model for this system, parameters describing microbial growth kinetics on TCE were determined using a CSTR bioreactor. Else parameters used for numerical simulation were determined from either indepedent experiments or values reported in the literature. The model was compared with the experimental data, and there was a good agreement between the predicted and the measured TCE concentrations in the system. To achieve a higher treatment efficiency, various operating conditions were simulated as well.

• KSBB Journal
• /
• v.13 no.3
• /
• pp.259-267
• /
• 1998

Optimal feeding strategies in bioreactor operation of Scutellaria baicalensis G. plant cell culture were investigated to maximize the production of flavone glycosides by using a structured kinetic model which can predict culture growth and flavone glycosides synthesis in a rigorous, quantitative manner. For the production of baicalin and wogonin-7-0-GA, the strategies for glucose feeding into Scutellaria baicalensis G. plant cell culture were proposed based on the model, which are a periodic fed-batch operation with maintenance of cell viability and of specific production rate respectively, and a perfusion operation with maintenance of specific production rate for baicalin and wogonin-7-0-GA. Simulation results showed that the highest volumetric concentration of flavone glycosides was obtained in a periodic fed-batch operation with maintenance of cell viability among all the suggested strategies. In the periodic fed-batch operations, the higher volumetric production of flavone glycosides was achieved compared with that in the perfusion operation. It can be concluded that a periodic fed-batch operation with maintenance of cell viability would be the optimal and practical operating strategy of Scutellaris baicalensis G. plant cell culture for the production of flavone glycosides.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.7
• /
• pp.1266-1277
• /
• 1992

In the machining processes, the tool chipping are known to be the most dangerous when the variation of end of tool edges is largest. Therefore, chipping has been caused by the stress distribution in the moment of cutting. In this study, in order to predict the shapes of tool chipping with the tool shapes and the cutting conditions, the premier chipping shapes of involute cutter iss predicted by the stress distribution value of cutting edges and it is verified by the experiments. The growth behavior of the tool chipping is considered through the experiment of gear cutting and in case of evaluation of specific cutting energy in the proper machining conditions through the simulation result, it can be known that the prediction of cutting force is possible accurately.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.314-339
• /
• 1982

Fluctuating climate is still most important environmental constrain, although improved modem agricultural technology has succeeded to increase crop production in the world. To stabilize the food production under fluctuating weather conditions, it is very needed to obain the quantitative information of interactions between crops and climate. The main purpose of this paper is three hold. Using the JIBP-data, the dry matter accumulation of rice crops is studied in relation to weather indexes (\SigmaTa and \SigmaSt). Temperature dependence of the yield index of rice is analyzed as to air temperature and water temperature. \SigmaT$_{10}$ -fluctuations are studied using meteorological data at various stations. The possible shift of \SigmaT$_{10}$ -isopleths due to climate fluctuation is evaluated. The second interest is in the plant climate of rice crops. Using results of canopy photosynthesis, it is pointed that the canopy structure has most important implication in plant climate. Leaf-air, stomatal, and mesophyll resistances of rice crops are described in relation to weather conditions. The change in light condition and aerodynamical property of rice crops with the growth is illustrated. The energy partition is also studied at different growing stages. Third point is to show in more detail effective countermeasures against cold irrigation water and cool summer. Heat balance of warming pond and polyethylene tube as a heat exchanger is studied to make nomo-grams for evaluating the necessary area and necessary length. Effects of windbreak net on rice crops are illustrated by using experimental and simulation results.lts.

• Journal of Korea Multimedia Society
• /
• v.9 no.8
• /
• pp.1086-1094
• /
• 2006

The CT is all relation knowledge and technology which are applied to make the culture contents. Recently demand regarding the CT is increasing rapidly with a great growth and high technology of culture contents industry. In this paper we suggest a CT technology valuation model for promoting R & D results and technical diffusion of the CT. Also, It is shown how to derive a value of the CT using simulation. For it, we study a classification and distinctive characteristics of the CT. And this paper reviews the methods of technology valuation that have been developed by valuation specialists.

• The KIPS Transactions:PartC
• /
• v.8C no.1
• /
• pp.41-50
• /
• 2001

With growth of Internet, real time multimedia application services require guarantee of QoS (Quality of Service). However, the existing Internet based on best-effort service is not enough to support those services, so MARS model to support IP multicast over ATM networks and RSVP to provide heterogeneous QoS by resource reservation scheme are proposed. As a simulation result, it is proved that processing delay of MARS is increased and success of resource reservation is decreased as a number of QoS change request of a receiver is increased. Therefore, it is important to provide heterogeneous QoS that distribute a load of MARS caused by convergence of messages and efficiently manage the resource of network as to find out scale of receivers and frequency of QoS change request.

• Journal of Korea Game Society
• /
• v.4 no.4
• /
• pp.25-30
• /
• 2004

Recently, it is increasing a users requiring actually and a variety of service due to a growth of wet based technique and network technique. In services, the interest in web and mobile contents domain is increasing rapidly. The most contents supported point or a E-Money as result of contents's usage. But, the point system be in name only due to a lack of a contents using a point or a related service. As a solution for this problem, this paper designed a supported system that integrated a point system supporting others contents and can associated to a game using that point. we made a simple game and supporting contents in web for simulating the designed system. Also, we realized the mobile system for communicating a data causing in web.