• ALGAE
• /
• 제20권2호
• /
• pp.127-132
• /
• 2005

Algal growth potentials were probed by algal growth rates, maximal PSII quantum yields and ATP amount as well as dry weights of algae to evaluate the water fertility due to the algal growth in the stream (CT) and stagnant watershed (WW). Oscillatoria agardhii (CY) and Coelastrum reticulatum (CH) were cultured in nitrogen (N) and phosphorus (P) starvation media (CH-10 medium) and re-inoculated in CT and WW for 7 days. Cell division rates of CY were the highest (k = 7.5) in WW after N starvation, while those of CH were the hight (k = 2.97) in WW after P starvation. The growth of CY was limited by P, while that of CH was by N. Conversely, maximal PSII quantum yields of CH were generally higher than those of CY in CT and WW according to culture time. CY was much more sensibly adapted than CH according to the variations of nutrient amounts in WW. The water fertility was much higher in WW than in CT. The potential assessment tool for water fertility will be able to compensate for the limit of physio-chemical analyses and to be applied as a monitoring system to forecast red-tide.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권4호
• /
• pp.129-137
• /
• 2019

Tax can be categorised into direct tax and indirect tax. This paper uses the ordinary least-squares regression method to study the impact of direct and indirect tax on economic growth in Vietnam in the period 2003-2017. Statistical data is collected from the Ministry of Finance of Vietnam. Theoretically, tax generates the state budget revenue and is a tool to regulate the economy. The results of statistical tests show that tax has a positive impact on Vietnam's economic growth. However, the effects of direct tax and indirect tax are different. The indirect tax has a positive influence and promote Vietnam's economic growth, while the impact of the direct tax is invisible. There has not been sufficient evidence to confirm that the indirect tax has a more positive impact than the direct tax. To promote economic growth, Vietnam needs to restructure its tax system towards: (1) Increasing the proportion of indirect tax, reducing the proportion of direct tax in the state budget revenue; (2) Expanding tax bases; (3) Reducing tax rates of corporate income tax and personal income tax; (4) Increasing tax rates of environmental protection tax, natural resources tax, value added tax and excise tax on some types of goods which harm health and environment.

• 대한기계학회논문집A
• /
• 제24권12호
• /
• pp.3088-3095
• /
• 2000

Creep-fatigue crack growth behavior was experimentally measured particularly when a crack was located in the heat affected region of lCr-5Mo steel. Load hold times of the tests for trapezoidal fatigue waveshapes were varied among 0, 30, 300 and 3,600 seconds. Time-dependent crack growth rates were characterized by the $C_r$parameter. It was found that the crack growth rates were the highest when the crack path was located along the fine-grained heat affected zone(FGHAZ). Cracks located in other heat affected regions had a tendency to change the crack path eventually to FGHAZ. Creep-fatigue crack growth law of the studied case is suggested in terms of (da/dt)$_{avg}$ vs. ($C_t$)$_{avg}$ for residual life assessment.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.373-378
• /
• 2000

The heat resistant material, in service, may experience static loading, cyclic loading, or a combination of two. An experimental study of crack growth behavior of STS 316L austenitic stainless steel under fatigue, and creep-fatigue loading conditions were carried out on compact tension specimens at various tensile hold times. In the crack growth experiments under hold times. In the crack growth experiments under hold time loading conditions, tensile hold times were ranged from 5 seconds to 100 seconds and its behavior was characterized using the $\Delta$K parameter. The crack growth rates generally increase with increasing hold times. However in this material, the trend of crack growth rates decreases with increasing hold times for short hold time range relatively. It is attributed to a decline in the cyclic crack growth rate as a result of blunting at the crack tip by creep deformation. The effect of grain size on the creep behavior of STS 316L was investigated. Specimens with grain size of 30, 65 and 125${\mu}{\textrm}{m}$ were prepared through various heat treatments and they were tested under various test conditions. The fracture mode of 316L changed from transgranular to intergranular with increasing grain size.

• 대한기계학회논문집A
• /
• 제30권10호
• /
• pp.1219-1226
• /
• 2006

The ASTM test standard recommends the use of the compact tension specimen for creep crack growth rates measurement. In the creep crack growth rate test, the displacement rate due to creep is obtained by subtracting the contribution of elastic and plastic components from the total load line displacement rate based on displacement partitioning method fur determining $C^*-integral$, which involves Ramberg-Osgood (R-O) fitting procedures. This paper investigates the effect of the R-O fitting procedures on plastic displacement rate estimates in creep crack growth testing, via detailed two-dimensional and three-dimensional finite element analyses of the standard compact tension specimen. Four different R-O fitting procedures are considered; (i) fitting the entire true stress-strain data up to the ultimate tensile strength, (ii) fitting the true stress-strain data from 0.1% strain to 0.8 of the true ultimate strain, (iii) fitting the true stress-strain data only up to 5% strain, and (iv) fitting the engineering stress-strain data. It is found that the last two procedures provide reasonably accurate plastic displacement rates and thus should be recommended in creep crack growth testing. Moreover, several advantages of fitting the engineering stress-strain data over fitting the true stress-strain data only up to 5% strain are discussed.

• ALGAE
• /
• 제33권4호
• /
• pp.329-340
• /
• 2018

The present study was to determine the effects of salinity on the growth and nutrient bioextraction abilities of Gracilaria and Ulva species, and to determine if these seaweeds can be used for nutrient bioextraction under hypo- and / or hyperosmotic conditions. Two Gracilaria species, G. chorda and G. vermiculophylla, and two Ulva species, U. prolifera and U. compressa, were cultured at various salinity conditions (5, 10, 15, 20, 30, 40, and 50 psu) for 3 weeks. Results showed that the growth rates, nutrient uptake, tissue nutrient contents and nutrient removal were significantly affected by salinity and species. All four species were euryhaline with the highest growth rates at 20 psu. Among the four species, U. prolifera, U. compressa, and G. vermiculophylla showed potential to be used for nutrient bioextraction in estuaries and / or land-based fish farms due to their rapid growth, high nutrient uptake, high tissue carbon and nitrogen accumulation and removal capacities.

• 한국결정성장학회지
• /
• 제19권3호
• /
• pp.107-115
• /
• 2009

Particular interest in the role of convection in vapor crystal growth has arisen since some single crystals under high gravity acceleration of $10g_0$ appear considerably larger than those under normal gravity acceleration ($1g_0$). For both ${\Delta}T=60\;K$ and 90 K, the mass flux increases by a factor of 3 with increasing the gravity acceleration from $1g_0$ up to $10g_0$. On the other hand, for ${\Delta}T=30\;K$, the flux is increased by a factor of 1.36 for the range of $1g_0{\leq}g{\leq}10g_0$. The maximum growth rates for $1g_0$, $4g_0$, $10g_0$ appear approximately in the neighborhood of y = 0.5, and the growth rates shows asymmetrical patterns, which indicate the occurrence of either one single or more than one convective cell. The maximum growth rate for $10g_0$ is nearly greater than that for $1g_0$ by a factor of 2.0 at $P_B=20\;Torr$. For three different gravity levels of $1g_0$, $4g_0$ and $10g_0$, the maximum growth rates are greater than the minimum rates by a factor of nearly 3.0, based on $P_B=20\;Torr$. The mass flux increases with increasing the gravity acceleration, for $1g_0{\leq}g_y{\leq}10g_0$, and decreases with increasing the partial pressure of component B, xenon (Xe), $P_B$. The $|U|_{max}$ is directly proportional to the gravity acceleration for $20\;Torr{\leq}P_B{\leq}300\;Torr$. As the partial pressure of $P_B$ (Torr) decreases from 300 Torr to 20 Torr, the slopes of the $|U|_{max}s$ versus the gravity accelerations increase from 0.1 sec to 0.17 sec. The mass flux of $Hg_2Cl_2$ is exponentially decayed with increasing the partial pressure of component B, $P_B$ (Torr) from 20 Torr up to 300 Torr.

• 한국결정성장학회지
• /
• 제11권5호
• /
• pp.231-237
• /
• 2001

Etch rates up to 120 nm/min for $Ta_{2}O_{5}$ were achieved in both $SF_{6}/Ar$ and $Cl_{2}/Ar$ discharges. The effect of ultraviolet (UV) light illumination during ICP etching on $Ta_{2}O_{5}$ etch rate in those plasma chemistries was examined and UV illumination was found to produce significant enhancements in $Ta_{2}O_{5}$ etch rates most likely due to photoassisted desorption of the etch products. The effects of ion flux, ion energy, and plasma composition on (Ba, Sr)$TiO_3$ etch rate were examined and maximum etch rate ~90 nm/min was achieved in $Cl_{2}/Ar$ ICP discharges while $CH_{4}/H_{2}/Ar$ chemistry produced extremely low etch rates (${\leq}10\;nm/min$) under all conditions.

• Plant Resources
• /
• 제5권3호
• /
• pp.187-191
• /
• 2002

This experiment was conducted to investigate the effects of turf grass growth to seedling rates and bed soil types. The results of this experiment were summarized as follows; the more increasing the seedling rates, the plant height and leaf length were longer, but the number of leaf and number of branch were fewer. Incase of transplanting of turf grass seedling by rice transplanting machine, it might be considered that the proper alternative bed soil was sandy loam soil with regarding to the economic aspects. The maximum seedling rate of turf grass in the seedling tray for rice was 1,000 of seedling amount due to the nutrient competition with intensive seedling. As the results indicated, it might be recommended that the proper alternative bed soil was sandy loam soil with 1,000 of seedling rates in case of transplanting of turf grass seedling by rice transplanting machine.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.333-337
• /
• 2008

This study investigates crack propagation behavior of Sn-3.0Ag-0.5Cu solder under pull-push loading conditions. Fatigue Crack Growth (FCG) tests were conducted on Center Cracked Plate (CCP) specimens in fast-fast (pp) strain waveform. The fast-slow (pc), slow-fast (cp) and slow-slow (cc) strain waveforms were also used to study the effect of strain rates. The crack propagation rates for the four strain waveforms were correlated with J-integral range and a scatter band of factor 4 was found. The crack growth rates for the pc waveform was highest, followed by cp, cc and then pp waveforms.