• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.472-478
• /
• 1989

본 연구에서는 FRP의 파괴인성평가를 위한 기초적인 자료를 얻기 위하여 FRP 중에서도 널리 사용되고 있는 SMC재를 준비하고 3점 굽힘시험을 실시하여 노치선단에서의 손상거동 및 균열진전저항유선으로부터 안정파괴개시점을 검토하였다.

• 지역연구
• /
• 제13권2호
• /
• pp.45-54
• /
• 1997

A regional economy is characterized as a spatial economy. However the literature shows that it has been treated as a point economy since space is little recognized in regional modeling due to mathematical complication. This leads to the fact that regional model does not sufficiently represent regional characteristic. This paper attempts to construct a regional growth model in a partial equilibrium framework specifically taking into consideration land as a primary factor. The model is formulated largely neoclassical. Labor is assumed to move in response to differences in the wage rate, while capital is perfectly mobile across regions. The paper shows that two growth equilibrium points exist, one stable equilibrium point and the other unstable equilibrium point. The unstable growth equilibrium indicates the existence of minimum threshold that a region must overcome the minimum threshold to grow constantly. Consequently, directions of regional growth are characterized by two growth paths depending on the initial condition of a region. That is to say, a region below the minimum threshold is converging toward the lower stable equilibrium point over time. When a regional economy initially lies above the minimum threshold, it will grow forever. A regional economy is not thus necessarily converging a stationary is not thus necessarily converging a stationary equilibrium point through factor movement. Finally, the impacts of the presence of agglomeration economies and diseconomies are analyzed through the phase diagram. The paper also shows that agglomeration economies result in lowering the minimum threshold and in escalating the level of stable equilibrium However, when agglomeration diseconomies prevail, the results are opposite, i.e., rising the minimum threshold of growth and lowering the growth level of stable equilibrium.

• 스마트미디어저널
• /
• 제11권7호
• /
• pp.94-103
• /
• 2022

Weeds bring disadvantages to crops since they can damage them, and a clean treatment with less pollution and contamination should be developed. Artificial intelligence gives new hope to agriculture to achieve smart farming. This study delivers an automated weeds growth point detection using deep learning. This study proposes a combination of semantic graphics for generating data annotation and U-Net with pre-trained deep learning as a backbone for locating the growth point of the weeds on the given field scene. The dataset was collected from an actual field. We measured the intersection over union, f1-score, precision, and recall to evaluate our method. Moreover, Mobilenet V2 was chosen as the backbone and compared with Resnet 34. The results showed that the proposed method was accurate enough to detect the growth point and handle the brightness variation. The best performance was achieved by Mobilenet V2 as a backbone with IoU 96.81%, precision 97.77%, recall 98.97%, and f1-score 97.30%.

• 한국안전학회지
• /
• 제9권3호
• /
• pp.22-27
• /
• 1994

For the $\beta$=1 specimen with constant thickness, Crack growth rate is smoothly increasing in the a-N curve. On the other hand for $\beta$=2 specimen with various thickness, the inflection point is observed in crack growth rate near the thickness interface. da/dN before the inflection point is increased, and da/dN after the point is decreased, compared to the $\beta$=1 specimen. da/dN near the thickness interface is approached zero. The descending point was observed earlier as $\beta$ increased. Considering the relation between da/dN and λ, the crack propagation rates for the case of $\beta$ =1 incrased almost linearly, however, the crack propagation rates for $\beta$=2,3 decreased more rapidly near the thickness interface. Additionally, the decreased point in da/dN for $\beta$=3 is farther from the thickness interface than the case for $\beta$ =2.

• 한국결정성장학회지
• /
• 제11권4호
• /
• pp.166-169
• /
• 2001

6H-SiC bulk crystals were grown by sublimation method with different conditions in term of gaseous pressures ad source temperatures. In order to optimize the growth rate, pressure at growth period and source and substrate temperatures were investigated as experimental variables. the results were compared with each other and finally the optimum growth conditions were discussed. Furthermore the relation of the growth steps and defects formation was evaluates in the point of reducing the micropipes. Subsequently the growth steps and defects formation was evaluated in the point of reducing the micropipes. Subsequently the growth steps were observed leading to the lower step height with the lower growth rate.

• 농업과학연구
• /
• 제43권4호
• /
• pp.623-633
• /
• 2016

A total of 6,973 steer growth records of Hanwoo breeding bull's progeny test data collected from 1989 to 2015 were analyzed to identify the most appropriate growth curve among three growth curve models (Gompertz, Logistic and von Bertalanffy). The Gompertz growth curve model equation was $W_t=990.5e^{{-2.7479e}^{-0.00241t}}$, the Logistic growth curve model equation was $W_t=772(1+8.3314e^{-0.00475t})^{-1}$, and the von Bertalanffy growth curve model equation was $W_t=1,196.4(1-0.646e^{-0.00162t})^3$. The Gompertz model parameters A, b, and k were estimated to be $990.5{\pm}10.27$, $2.7479{\pm}0.0068$, and $0.00241{\pm}0.000028$, respectively. The inflection point age was estimated to be 421 days and the weight of inflection point was 365.3 kg. The Logistic model parameters A, b, and k were estimated to be $772.0{\pm}4.12$, $8.3314{\pm}0.0453$, and $0.00475{\pm}0.000033$, respectively. The inflection point age was estimated to be 445 days and the weight of inflection point was 385.0 kg. The von Bertalanffy model parameters A, b, and k were estimated to be $1196.4{\pm}18.39$, $0.646{\pm}0.0010$, and $0.00162{\pm}0.000027$, respectively. The inflection point age was estimated to be 405 days and the weight of inflection point was 352.0 kg. Mature body weight of the von Bertalanffy model was 1196.4 kg, the Gompertz model was 990.5 kg, and the Logistic model was 772.0 kg. The difference between actual and estimated weights was similar in the Logistic model and the von Bertalanffy model. The difference between market weight and estimated market weight was the lowest in the Gompertz model. The growth curve using the von Bertalanffy model showed the lowest mean square error.

• Imaging Science in Dentistry
• /
• 제47권1호
• /
• pp.1-9
• /
• 2017

Purpose: This retrospective study aimed to evaluate the nasopharyngeal and oropharyngeal dimensions of individuals with skeletal class II, division 1 and division 2 patterns during the pre-peak, peak, and post-peak growth periods for comparison with a skeletal class I control group. Materials and Methods: Totally 124 lateral cephalograms (47 for skeletal class I; 45 for skeletal class II, division 1; and 32 for skeletal class II, division 2) in pre-peak, peak, and post-peak growth periods were selected from the department archives. Thirteen landmarks, 4 angular and 4 linear measurements, and 4 proportional calculations were obtained. The ANOVA and Duncan test were applied to compare the differences among the study groups during the growth periods. Results: Statistically significant differences were found between the skeletal class II, division 2 group and other groups for the gonion-gnathion/sella-nasion angle. The sella-nasion-B-point angle was different among the groups, while the A-point-nasion-B-point angle was significantly different for all 3 groups. The nasopharyngeal airway space showed a statistically significant difference among the groups throughout the growth periods. The interaction among the growth periods and study groups was statistically significant regarding the upper oropharyngeal airway space measurement. The lower oropharyngeal airway space measurement showed a statistically significant difference among the groups, with the smallest dimension observed in the skeletal class II, division 2 group. Conclusion: The naso-oropharyngeal airway dimensions showed a statistically significant difference among the class II, division 1; class II, division 2; and class I groups during different growth periods.

• 한국결정성장학회지
• /
• 제11권6호
• /
• pp.259-263
• /
• 2001

The continuum model of transient point defect dynamics to predict the concentrations of interstitial and vacancy is established by estimating expressions for the thermophysical properties of intrinsic point defects. And the point defect distribution in a Czochralski-grown 200 mm silicon crystal and the location of oxidation-induced stacking fault ring(OiSF-ring) created during the cooling of crystals are calculated by using the numerical analysis. The purpose of this paper is to show that his approach lead to predictions that are consistent with experimental results. Predicted point defect distributions by transient point defect dynamic analysis are in good qualitative agreement with experimental data under widely and abruptly varying crystal pull rates when correlated with the position of the OiSF-ring .

• 생물환경조절학회지
• /
• 제13권2호
• /
• pp.102-106
• /
• 2004

착색단고추 관비재배 시 토양수분함량이 생육 및 품질에 미치는 영향을 구명하여 생산성 향상을 위한 기초자료로 활용코져 수행하였다. 광합성속도 및 증산속도는 토양내 수분량이 적은 -30 ㎪에서 낮았으며, 토양의 pH와 EC는 수분함량에 따른 큰 변화 없이 안정적이었다. 식물체의 전질소 함량은 -30 ㎪에서 가장 낮았으며, 칼륨, 칼슘, 마그네슘은 -10 kPa에서 가장 높았고, 인산은 처리간에 유의성이 없었다. 정식 60일째의 생육은 토양수분함량이 낮아질수록 저조하였으나 정식 210일째는 토양수분함량간에 유의성이 없었다. 품질은 토양수분함량에 따른 유의성이 없었으나 당도만 -30 ㎪에서 $8.0^{\circ}$Brit로서 가장 높았다. 따라서 착색단고추 관비재배를 위한 토양수분의 함량은 -10 ㎪∼-20 ㎪에서 생육 및 품질이 양호하였다.

• 비파괴검사학회지
• /
• 제18권4호
• /
• pp.278-291
• /
• 1998

연속섬유강화 복합재료의 경우 보강섬유의 파괴, 모재의 파괴, 섬유와 모재의 분리, 층간파괴 등의 복합적인 파괴현상이 동반되고 특히 균열성장과 균열성장 정지가 균열가교 현상 때문에 반복되므로 안정성장과 불안정성장이 불규칙하게 반복된다. 따라서 주균열 성장의 개시점과 불안정 파괴점에서의 파괴인성치를 정확하게 결정한다는 것은 매우 어려운 것이다. 본 연구에서는 CFRP에 대하여 파괴인성 실험과 병행하여 실시간으로 결함을 검출하는 새로운 방법인 AE분석법 및 비디오 마이크로 스코프를 이용하여 파괴과정을 기록하여 검토, 분석함으로서 손상의 정도와 파괴기구를 규명하였을 뿐만 아니라 주균열 성장의 개시점, 균열가교 역할을 하는 섬유다발의 파단점, 균열의 불안정 파괴 개시점을 찾아 이를 기초로 균열진전 저항곡선에 의한 파괴인성치를 평가하여 신뢰성 있는 파괴인성 측정법을 제시하였다.