• 대한치과보철학회지
• /
• 제31권1호
• /
• pp.19-27
• /
• 1993

For the purpose of this study was to determine the growth of Candide albicans on the surface of the resilient denture liners. The discs$(40\times40mm)$ of 2 resilient lining materals (Molloplast B, Mollosil) and one conventional acrylic resin (K-33) and one metal plate were processed and disinfected. Firstly, the test discs were placed into petri dish, and Candide albicans suspensions was overlayed on the test discs. And the test discs were incubated with intermitant shaking for 1 hour, 2 hours, 6 hours, 12 hours, 24 hours. After incubation, imprint culture method was achived and counted the colony on the agar plate. Secondly, the effect of denture cleansing agents on the growth of Candide alibicans on the resilient dentureliners was evaluated. The results were as follows : 1. The growth of Candida albicans on discs of Molloplast B and Mollosil was increased than that on discs of acrylic resin and metal plate (p<0.05). 2. As Candide albicans suspensions were incubated for 2 hours, the growth of Candida albicans on discs of Mollosil was increased than that on discs of Molloplast B (p<0.05), and the growth of Candide albicans on discs of metal plate was increased than that on discs of acrylic resin (p<0.05). 3. As Candide albicans suspensions were incubated for 6 hours, the growth of Candide albicans on discs of Mollosil was increased than that on discs of Molloplast B (p<0.05). 4. The growth of Candide albicans on discs of Mollosil and Molloplast B in treating denture cleansing agent was inhibited than control discs (p<0.05).

• Biomolecules & Therapeutics
• /
• 제3권4호
• /
• pp.294-300
• /
• 1995

DA-3002, an authentic recombinant human growth hormone(rhGH), was examined for mutagenicity in the reverse mutation test on bacteria, in the chromosomal aberration test on cultured mammalian cells and in the micronucleous test on mice. The reverse mutation test was performed by a plate incorporation method with or without a metabolic activation system(S9 Mix) using Salmonella typhimurium strain TA100, TA1535, TA98 and TA1537. DA-3002 did not significantly increase revertant colonies in any of the test strains under any conditions at dose levels ranging from 0.0125 to 0.4 IU/plate, compared with the vehicle control. In the chromosomal aberration test using cultured Chinese hamster lung(CHL) cells, DA-3002 did not increase the number of aberrant cells in the presence or absence of S9 mix at concentrations of 0.0125 IU/mι to 0.4 IU/mι, compared with the vehicle control. In the micronucleus test, male ICR mice were given DA-3002 intraperitoneally at a dose level of 20, 40 and 80 lU/kg. The incidence of bone marrow micronucleated polychromatic erythrocytes in the DA-3002 treated mice did not differ from that of the vehicle control. These results indicate that DA-3002 doesn't have mutagenic potential under the present test conditions.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.143-160
• /
• 1996

The purpose of this study was to evaluate the response in aspect of attachment and growth rate of osteoblasts and growth rate of osteoblasts and human gingival fibroblasts to the commercially pure titanium(CP titanium)and titanium alloy(Ti-6AI-4V) that are used widely as implant materials, and to obtain the basic information to ideal implant materials. In the studly, commercially pure titanium in first test group, titanium alloy(Ti-6AI-4V) in second test group, cobalt-chrome-molybdenum alloy(Co-Cr-Mo alloy) in positive control group, and tissue culture polystyrene plate in negative control group were used. The results of this study were as follows. 1. Bone marrow cells cultured on CP titanium and Ti-6Al-4V showed significantly greater attachment and growth rate(p(0.05) compared to Co-Cr-Mo alloy in each time. 2. There were no significant differences(p>0.05) in attachment and growth rate of bone marrow cells cultured on CP titanium and Ti-6AI-4V or tissue culture plate. 3. Most bone marrow cells cultured on CP titanium, Ti-6Al-4V and tissue culture plate were attached well to each substratum in first 2days, and then, grew at higher growth rate. On the other hand, some cells cultured on Co-Cr-Mo alloy failed to attach in first 2 days, and then, attached cells grew at lower growth rate than other groups. 4. Attachment and growth rates of gingival fibroblasts cultured on CP titanium and Ti-6Al-4V showed no significant differences(p>0.05) compared to Co-Cr-Mo alloy in 2 days, but significantly greater increase(p<0.05) in 5 and 9 days. 5. There were no significantly differences(p>0.05) between growth rates on gingival fibroblasts cultured on CP titanium, Ti-6Al-4V and tissue culture plate in 2 and 5days, but a significant lower growth rate(p<0.05) on CP titanium and Ti-6Al-4V versus tissue culture plate. 6. Some gingival fibroblasts cultured on all specimen groups failed to attach, but attached cells grew well, especially on CP titanium, Ti-GAl-4V and tissue culture plate. 7. There were no significant differences(P>0.05) between growth rates of both bone marrow cells and gingival fibroblasts cultured on CP titanium and Ti-6AI-4V. As a result of this study, both commercially pure titanium and Ti-6AI-4V showed excellent biocompatibility and there was no significant difference in the cellular response to the both metals. Bone marrow cells cultured on each substratum showed significantly greater growth rate and responded sensitively to cytotoxic effects of metal surfaces compared to gingival fibroblasts. Considering cell response to the substrate, it was likely that the composition itself of titanium metals have no significant effect on the biocompatibility. Further study need to be done to evaluate the influence of surface characteristics on cellular responses.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.73-79
• /
• 2003

Fatigue test is conducted to see the effect of pre-indentation on the fatigue crack retardation of Al5052-H18 plate. Metallographic observation is introduced to deduce the relationship between fatigue crack retardation and fracture appearance with indentation. The grain size of the specimen becomes smaller with the increase of indentation force and the plastic zone is formed with the decrease of grain size. The fatigue striations are appeared densely as the Indentation force becomes higher. Metallographic observation and fatigue test results show that the indentation force has the limited value in improving fatigue crack retardation. Important point to retard the fatigue crack growth is that the crack growth path should pass through the indented area.

• 대한기계학회논문집A
• /
• 제25권12호
• /
• pp.2091-2099
• /
• 2001

Fatigue crack growth behavior of inclined cracked Al 6061-T6 thick aluminum plate(6mm) repaired with the bonded composite patch was studied. A 0°inclined crack bonded reinforced composite patch and 15°, 30°, 45°, 60°inclined crack plates were tested. The effect of patch and inclined angle were studied and compared to each other. Also we investigated to the crack propagation direction and debonding behavior during the fatigue crack growth test. In this paper. a study was con(ducted to get an fatigue life, fatigue crack growth ratio and crack growth direction. Finally, the effectiveness of composite patch on inclined cracked plate was investigated. The results demonstrated thats there was a definite variation in fatigue life and fatigue crack growth behavior depending on the inclined crack angle.

• 한국방사선학회논문지
• /
• 제9권6호
• /
• pp.349-356
• /
• 2015

본 연구는 TW3법에서 골성숙 가중치가 가장 높은 7부위를 선정하여 성장판과 골 말단부 사이의 길이를 측정하여 연령과의 상관관계를 알아보고자 하였다. 실험은 2014년 3월에서 2015년 3월까지 성장판검사를 시행한 소아 72명(남 36명, 여 36명)을 대상으로 하였으며, 소아 손 전후영상에서 성장판과 골 말단부 사이의 길이를 측정하여 회귀분석을 하였다. 그 결과 각 연령마다 특정범위에 상응하는 평균과 표준편차 값이 나타났으며, 연령이 증가할수록 성장판과 골 말단부 사이 길이가 감소하였다. 또한 여아가 남아에 비해 평균값이 작게 나타났으며, 회귀분석 결과에서 성장판과 골 말단부 부위 측정 길이와 연령이 통계적으로 유의(p<0.001)한 것으로 나타났다. 따라서 소아 손 전후영상에서 TW3법의 응용을 통한 회귀방정식으로 골연령의 예측이 가능함을 알 수 있었다.

• 한국동물위생학회지
• /
• 제18권2호
• /
• pp.163-176
• /
• 1995

Triphenyl Tetrazolium Chloride(TCC) reduction test is simple and sensitive to some residual antibiotics (especially to penicillin) in milk, but comparatively insensible to sulfo-namides. The volumn of sample is also large. Thus this study was undertaken to increase the detectable level of sulfonamides in raw milk. In this study, we used small transparent plastic hole and pulp disc instead of 10m1 test tube and made test medium in which was added 0.08%TTC, 0.3% agar, 10% skim milk, approximately $10^6$ CFU/ml streptococcus thermophilus and 5ppm Trimethoprim to enhance the sensitivity for sulfonamides The results of TCC reduction test by disc plate method were summarized as follows : 1. sensitivity to residual sulfonamides were much higher than official TCC reduction test. Detectable limites of sulfamethazine, sulfamerazine, sulfathiazole, sulfachloropy-ridazine, sulfadimethoxine, sulfamononethoxine, sulfadiazine and sulfaquinoxaline were 0.1-0.5ppm levels. 2. Detectable limites to some antibiotics were simillar or good than that of official method as 0.005-0.1ppm to three ${\beta}$ -lactams, 0.25-0.5ppm to one macrolide, 2-10ppm to three aminoglycosides, 0.2-0.5ppm to three tetracycline, 0.1-0.5ppm to chloramphenicol. 3. Only 0.1ml of milk was needed to test and the test medium could be stored appnoximatly 7days in the refrigerator. So test procedure was convenient than offcial method. 4. These results suggest that disc plate method is more useful to detect bacterial growth inhibition substances including sulfonamides in raw milk.

• 대한한의학회지
• /
• 제40권1호
• /
• pp.24-33
• /
• 2019

Objectives: The purpose of this study is to analyze the causes of short stature through a clinical review of factors related to childhood height growth. So we can find the way to meet the needs of the heightism which is widely spread among modern people. Methods: Among 160 patients who came to Andong B oriental clinic for the purpose of growth therapy, 112 children whose height was smaller than other normal children were analyzed. When the children first came to the clinic, we checked their height and weight. The parents' height was recorded through a questionnaire. The relationship between obesity index and height growth was examined through growth plate test and Inbody test. We want to identify the genetic factors related to parental factors based on the data of the parent height. Results: For short stature children, weight was often normal or low. When we examined the relationship between parental genetic factors and child growth, we found that they were more influenced by father's height rather than mother's. We investigated the correlation between skeletal maturity and the five viscera. There was no apparent correlation between skeletal maturity and the five viscera but we found that there was some degree of relevance. Conclusions: For short stature children, the weight was often normal or low and parental genetic factors were more influenced by father than by mother. In the case of bone maturity it did not show a direct correlation between the five viscera.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.911-919
• /
• 2021

In this paper, the design stress intensity values for the plate-type fuel assembly for research reactor are presented. Through a tensile test, the material properties of the cladding (aluminum alloy 6061) and structural material (aluminum alloy 6061-T6), in this case the yield and ultimate tensile strengths, Young's modulus and the elongation, are measured with the temperatures. The empirical equations of the material properties with respect to the temperature are presented. The cladding undergoes several heat treatments and hardening processes during the fabrication process. Cladding strengths are reduced compared to those of the raw material during annealing. Up to a temperature of 150 ℃, the strengths of the cladding do not significantly decrease due to the dislocations generated from the cold work. However, over 150 ℃, the mechanical strengths begin to decrease, mainly due to recrystallization, dislocation recovery and precipitate growth. Taking into account the uncertainty of the 95% probability and 95% confidence level, the design stress intensities of the cladding and structural materials are established. The presented design stress intensity values become the basis of the stress design criteria for a safety analysis of plate-type fuels.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.134-141
• /
• 2013

Reflow soldering process is essential in electronic package. Reflow process for a long time results from the decrease of reliability because IMC is formed excessively. Solder alloys of Sn-37Pb and Sn-Ag with different kinds of Cu contents (0, 0.5 and 1 wt.%) as compared with Ni and Cu plate joints are investigated according to varying reflow time. The interfaces of solder joints are observed to analyze IMC (intermetallic compound) growth rate by scanning electron microscope (SEM). Shear test is also performed by using SP (Share-Punch) tester. The test results are compared with the solder joints of two different plates (Ni and Cu plate). $Cu_6Sn_5$ IMCs are formed on Cu plate interfaces after reflows in all samples. Ni3Sn4 and $(Cu,Ni)_6Sn_5$ IMCs are also formed on Ni plate interfaces. The IMC layer forms are affected by reflow time and contents of solder alloy. These results show that mechanical strength of solder joints strongly depends on thickness and shape of IMC.