• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.214-217
• /
• 2004

숭화법을 이용한 탄화규소(Silicon carbide) 단결정 성장시 사용되는 원료의 상(phase)이 단결정 성장에 미치는 영향을 알아보기 위해 알파형 탄화규소 분말(${\alpha}-SiC$ powder)과 베타형 탄화규소 분말(${\beta}-SiC$ powder)을 각각 사용하였다. 알파형 탄화규소 분말을 사용한 경우에 단결정(single-crystal)을 성장할 수 있었으나, 베타형 탄화규소 분말을 사용하였을 때에는 다결정(poly-crystal)이 성장되었다. 다결정 형성요인에 관한 EPMA 분석결과, 베타형 탄화규소 분말의 탄소에 대한 실리콘의 원소조성비$(N_{Si}/N_C\;=\;1.57)$가 알파형 탄화규소 분말의 경우보다$(N_{Si}/N_C\;=\;0.81)$ 높음을 확인하였다. 따라서 흑연도가니(crucible) 내부의 실리콘 원자가 알파형 탄화규소 분말을 사용하는 경우보다 높은 과포화상태가 되어 종자정 표면에 미세한 실리콘 액적(droplet)이 중착되고 이것으로부터 일정하지 않은 방향성(random orientation)을 갖는 탄화규소 다결정(다양한 방향성을 갖는 다형 포함)이 성장한 것으로 실리콘과 탄소 원소에 대한 EPMA 지도(map) 결과를 통해 확인할 수 있었다.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.386-392
• /
• 2011

We are crystallized to the linear low density polyethylene(LLDPE) particles by a thermally induced phase separation(TIPS). TIPS process based on the phase separation mechanism was performed for the LLDPE system which undergoes liquid-solid phase separation. The linear low density polyethylene particle formation occurred by the nucleation and growth mechanism in the metastable region. Although the growth rates depended on the experimental conditions such as the polymer concentration and temperature, the particles were larger when the polymer concentration was higher or temperature was higher. The particles were observed by SEM. The LLDPE particle size distribution became broader when the polymer concentration was higher.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.525-526
• /
• 2006

Calcium-hexaluminate phase $(CA_6)$ is known to be effective for the crack shielding due to the spinel block crystal structure. In this study, we focused to the control of $CA_6$ morphology for good damage tolerance behavior in alumina and zirconia/calcium-hexaluminate $(CA_6)$ composites. Calcium-hexaluminate $(CA_6)$ composites were prepared from zirconia, alumina and calcium carbornate powders. Calcium-hexaluminate $(CA_6)$ phase was obtained by the solid reaction through the formation of intermediate phase $(CA_2)$. $CA_6$ phase showed the column type abnormal grain grown behavior composed of small blocks. Due to the typical microstructure of $CA_6$, alumina and zirconia/calcium-hexaluminate composites provide a well controlled crack propagation behavior.

• Journal of Microbiology and Biotechnology
• /
• v.9 no.5
• /
• pp.589-592
• /
• 1999

Suspension cultures of Digitalis lanata were successfully performed in an aqueous two-phase system (ATPS) of 4.5％ polyethylene glycol (PEG) 20,000 and 2.8％ crude dextran. Cell growth in the medium containing an individual ATPS-forming polymer was inhibited due to the toxicity of PEG and a high viscosity of dextran. Formation of ATPS supported cell growth by showing a considerably decrease in viscosity and partitioning of cells into a PEG-lean dextran phase. It was found that an aqueous two-phase cultivation of plant cells in a stirred tank bioreactor could be successfully applied.

• BMB Reports
• /
• v.29 no.3
• /
• pp.221-224
• /
• 1996

To examine the growth-phase dependent control of Escherichia coli rnpB gene we used a combination of Northern analysis for RNA determination and Southern analysis for plasmid DNA determination. The relative amounts of metabolically unstable transcript derived from the internally deleted rnpB gene harbored on a multicopy plasmid as well as the relative plasmid contents were measured by Northern analysis and Southern analysis, respectively, of total nucleic acids from E coli cells containing the plasmid. The relative transcription activity of the rnB was represented by a ratio of the relative amount of the transcript to that of the plasmid DNA during bacterial growth. The rnpB transcription increased rapidly with time during exponential growth, but started to decrease before the transition period of an exponential growing cell culture into the stationary phase. Although the expression pattern was similar to the changes of ${\beta}-galactosidase$ activity expressed from the lysogenic strain carrying the chromosomal rnpB-lacZ fusion which were shown in a previous work, the present data appears to represent a more actual growth-phase control of the rnpB transcription than the previous data by the ${\beta}-galactosidase$ assay. In addition the present method described for a direct analysis of both RNA and plasmid DNA provides a rapid and efficient method that can applied to an examination of transcription control by using a multicopy plasmid.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.4
• /
• pp.139-142
• /
• 2024

Along with the use of wide bandgap energy materials such as SiC and GaN in power semiconductors and the development trend of devices, many research results have been reported, including the success of research on AlN single crystals with higher energy gaps and the development of 2-inch single crystal wafers. However, AlN single crystals grown using chemical vapor deposition have been developed into thin films less than a few micrometers thick, but there are almost no results with thicknesses greater than that. Therefore, in this study, we attempted to grow by applying HVPE (Hydride vapor phase epitaxy), one of the chemical vapor deposition methods. The grown AlN single crystal was manufactured using self-designed equipment, and we attempted to establish the conditions for manufacturing AlN single crystals on sapphire wafer. We would like to characterize the growth behavior through an optical microscope observation.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2008.05a
• /
• pp.43.1-43.1
• /
• 2008

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.275-279
• /
• 1998

The influence of $WO_3$ (0.5-4.0mol%) on the microstructural and electrical properties of ZnO varistors was investigated. The major part of a tungsten segregated to the nodal point. SEM, EDAX, and XRD analysis revealed that three phase, such as W-rich phase, Bi-rich phase, and spinel phase, coexist at the nodal point. The average grain size increased in the range of 15.5-29.9pm with increasing $WO_3$ content. This may be probably attributed to liquid phase formed by $WO_3$, $WO_3$ acted as promotion additive of grain growth. As $WO_3$ content increase, the varistor voltage greatly decreased in the range 186.82-35.87V/mm due to the increase of grain growth. The barrier height decreased in the range 1.93-0.42eV with increasing $WO_3$content.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.361-365
• /
• 2015

Vanadium dioxide ($VO_2$) of monoclinic phase exhibits Metal Insulator Phase Transition (MIPT) phenomenon involving a sharp change in electrical and optical properties at $68^{\circ}C$. Solution-based process is applied to form uniform $VO_2$ coating layer on ceramic tiles. This can selectively block the near-infrared light to possibly reduce the energy loss and prevent dew condensation caused by the temperature difference. Heat treatment conditions including temperature and dwell time were examined to obtain a monoclinic $VO_2$ single phase. Both rutile and monoclinic $VO_2$ phases were observed from in the tiles post-annealed below $700^{\circ}C$. Desired monoclinic $VO_2$ single phase was grown in the tiles heat treated at $750^{\circ}C$. Nano facets of irregular size were observed in the monoclinic $VO_2$ phase involving the phase-transition. Grain growth of monoclinic $VO_2$ phase was observed as a function of dwell time at $750^{\circ}C$.

• Journal of Korean Society for Quality Management
• /
• v.47 no.1
• /
• pp.187-198
• /
• 2019

Purpose: In this study, a reliability prediction based reliability growth management is suggested especially for the early development phase of a system and the case study of surveillance system is given. Methods: The proposed reliability prediction based reliability growth management procedures consists of 7 Steps. In Step 1, the stages for reliability growth management are classified according to the major design changes. From Step 2 to Step 5, system reliability is predicted based on reliability structures and the predicted reliabilities of subsystems (Level 2) and modules (Level 3). At each stage, by comparing the predicted system reliability with that of the previous stage, the reliability growth of the system is checked in Step 6. In Step 7, when the predicted value of sustem reliability does not satisfy the reliability goal, some design alternatives are considered and suggested to improve the system reliability. Results: The proposed reliability prediction based reliability growth management can be an efficient alternative for managing reliability growth of a system in its early development phase. The case study shows that it is applicable to weapon system such as a surveillance system. Conclusion: In this study, the procedures for a reliability prediction based reliability growth management are proposed to satisfy the reliability goal of the system efficiently. And it is expected that the use of the proposed procedures would reduce, in the test and evaluation phase, the number of corrective actions and its cost as well.