• 한국조경학회지
• /
• 제33권4호
• /
• pp.119-128
• /
• 2005

This study was carried out to obtain fundamental information of growth response of interior landscape plants under a fluorescent lighting, a sunlight at indoor. Ficus elastica Roxb. vu. decora Hort, Spathiphyllum 'Clevelandii', Codiaeum variegatum Blume var. pictum Mvell. Arg. 'Exalant' and Cordyline terminalis Kunth var. red edge Hort were examined under 100lux, 500lux, 1,000lux and 2,000lux light intensity consisted of fluorescent lighting and sunlight at indoor condition. Result of experiments are as follows; 1. A Ficus elastica Roxb. var. decora Hort plant growth status was better showed under fluorescent lighting than sunlight. A plant growth status showed the best result under 2,000lux light intensity of fluorescent lighting in cases of all conditions. 2. A Spathiphyllum 'Clevelandii' showed the best effective adaptations under law intensity among experimental plants. A Spathiphyllum 'Clevelandii', plant growth status was better showed under fluorescent lighting than sunlight. A plant growth status showed the best result under 1,000lux light intensity of fluorescent lighting in cases of all conditions. 3. It need the best high establishment of fluorescent lighting among experimental plants for good plant growth. A Codiaeum variegatum Blume var. pictum Mvell. Arg. 'Exalant' plant growth status was better showed under fluorescent lighting than sunlight. A plant growth status was better showed under high light intensity in case of same light source. A plant growth status showed the best result under 2,000lux light intensity of fluorescent lighting. 4. A Cordyline terminalis Kunth var. red edge Hort plant growth status was better showed under fluorescent lighting than sunlight. but, A plant growth status was better showed under $500lux\sim1,000lux$ than 2,000lux in cases of all intensity of fluorescent lighting. while, A plant growth status was better showed under $1,000lux\sim2,000lux$ in cases of all intensity of sunlight.

• 임산에너지
• /
• 제19권1호
• /
• pp.20-29
• /
• 2000

본 연구는 피음이 층층나무 1년생 유묘의 생장에 미치는 영향을 구명하기 위하여 수행되었다. 실험은 자연전광의 100, 50, 30, 17, 9, 및 1%로 조절된 야외피음 포지에서 이루어졌으며 다음과 같은 결과를 얻을 수 있었다. 묘고생장은 상대광도 100%와 50%에서 가장 높았으며 상대생장율에서는 100%구보다는 50%구에서 높게 나타났다. 상대광도 9%구 이하에서는 생장을 하지 못했다. 근원경생장은 묘고생장과 유사한 결과를 보였다. 엽면적은 상대광도 50%구에서 가장 높았으며 그이하의 광도에서는 대구조에 비해 작게 나타났다. SLA와 LAI는 광도가 감소함에 따라 증가하였다. LAR과 LWR은 광도가 감소함에 따라 증가하였으나 상대광도 9%이하의 광도에서 LWR은 다시 감소하였다. 상대광도가 낮아짐에 따라 유묘의 뿌리, 줄기, 잎의 biomass 생산 및 가지와 잎 수는 감소되었다. T/R율은 17%와 30%구에서 가장 높았다. 또한 측근은 50%구를 제외하고 광도가 감소함에 따라 감소하였다.

• 환경생물
• /
• 제41권4호
• /
• pp.697-705
• /
• 2023

Along with other heavy metals, arsenic (As) is one among the substances most harmful to living organisms including humans. Owing to its morphological similarity to phosphorus, the uptake of As is influenced by photosynthesis and the phosphorus uptake pathway. In this study, we varied arsenic exposure and light intensity during nutrient solution cultivation of lettuce (Lactuca sativa L.) to determine the effect of these two factors on arsenic uptake, lettuce growth, and electron transfer in photosystem II. In the treatment exposed to 30 μmol L^-1 of arsenic, the shoot arsenic concentration increased from 4.73 mg kg^-1 to 18.97 mg kg^-1 as the light intensity increased from 22 to 122 μmol m^-2 s^-1. The water content and ET2o/RC of the shoots were not affected by arsenic at low light intensity; however, at optimal light intensity, they decreased progressively with arsenic exposure. Increased light intensity stimulated the growth of plant roots and shoots; contrarily, the difference in growth decreased as the concentration of As exposure increased. The results of this study suggest that the effect of As on plant growth is dependent on light intensity; in particular, an increase in light intensity can increase the uptake of As, thereby affecting plant growth and As toxicity.

• 대한기계학회논문집
• /
• 제10권2호
• /
• pp.208-214
• /
• 1986

본 연구에서는 균열 닫힘에 관한 연구의 일환으로 5083-O 알루미늄합금을 사용하고 소규모강복조건하에서 일정진폭하중피로시험을 시행하여 이 재료의 피로균열 진전속도와 균열닫힘에 관하여 검토하였다.

• 한국산림과학회지
• /
• 제98권5호
• /
• pp.584-592
• /
• 2009

The objective of this study was to examine the impact of pruning intensity on the vigor and cambial growth of the treated trees, and on the closure of pruning wounds for one year after pruning treatment. Two tree species, Pinus strobus and Acer palmatum, planted broadly in the urban forest of Korea were selected for the experiment. Intensity of pruning, which was estimated by proportion of removed branches, was categorized into five levels with about 10% intervals from lowest 8% up to 46%. Following parameters were examined; cambial electrical resistance (CER) and the cambial growth of trunk at 30 cm above the ground for the years before and after pruning, the cambial growth of stem at 1.5 cm above the branch bark ridge (BBR) of the pruned branch, and closure of pruning wound for one year after pruning. Tree vigor inferred from CER had a tendency to be weakened as pruning intensity increased in P. strobus, while that of A. palmatum was not affected. The trunk growth decreased significantly when the pruning intensity was higher than 30% in both species. The closure of individual pruning wound was related more to the cambial growth of stem at 1.5 cm above BBR than to the pruning intensity. Comparing the closure rate of pruning wound for one year, P. strobus with 72.1% was faster than A. palmatum with 39.3%, which corresponded with the rate of cambial growth of the two species.

• Journal of Welding and Joining
• /
• 제7권1호
• /
• pp.28-35
• /
• 1989

The fatigue crack growth behavior in GTA butt welded joints of Al-Alloy 5052-H38 was examined using Single Edge Notched(SEN) specimens. It is well known that welding residual stress has marked influence on fatigue crack growth rate in welded structure. In the general area of fatigue crack growth in the presence of residual stress, it is noted that the correction of stress intensity factor (K) to account for residual stress is important for the determination of both stress intensity factor range(.DELTA.K) and stress ratio(R) during a loading cycle. The crack growth rate(da/dN) in welded joints were correlated with the effective stress intensity factor range(.DELTA.Keff) which was estimated by superposition of the respective stress intensity factors for the residual stress field and for the applied stress. However, redistribution of residual stress occurs during crack growth and its effect is not negligible. In this study, fatigue crack growth characteristics of the welded joints were examined by using superposition of redistributed residual stress and discussed in comparison with the results of the initial welding residual stress superposition.

• 대한기계학회논문집
• /
• 제4권2호
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• ALGAE
• /
• 제26권1호
• /
• pp.73-77
• /
• 2011

A dominant planktonic bloom-forming species, Mallomonas elongata was isolated from a small shallow eutrophic pond. The growth characteristics of this species on variable silicate concentrations and light intensities were investigated in laboratory unialgal cultures. In culture condition of $15^{\circ}C$, the maximum population growth and the highest growth rate of M. elongata occurred at a light intensity of $80\;{\mu}mol\;m^{-2}s^{-1}$, and in culture condition of $18^{\circ}C$, it exhibited the maximum population growth and the highest growth rates at a light intensity of $50\;{\mu}mol\;m^{-2}s^{-1}$. Silicate concentration had no effect on the population growth and growth rate of M. elongata.

• 한국해양공학회지
• /
• 제17권2호
• /
• pp.54-59
• /
• 2003

The characteristics of the parameters for the probability distribution of fatigue crack growth life, using the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length equals the number of cycle curves that are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratios of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Wiubull,, showing a slight dependence on specimen thickness and stress intensity level. The shape parameter, $\alpha$, does not show the dependency of thickness and stress intensity level, but the scale parameter, $\beta$, and location parameter, ${\gamma}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.301-306
• /
• 2002

The characteristics of parameters for the probability distribution of fatigue crack growth lives by the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length - the number of cycles curves are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratio of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth lives seems to follow the 3-parameter Wiubull and shows a slight dependence on specimen thickness and stress intensity level. The shape parameter, ${\alpha}$, does not show the dependency of thickness and stress intensity level, but the scale parameter, ${\beta}$, and location parameter, ${\upsilon}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.