• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.4 s.111
• /
• pp.119-128
• /
• 2005

This study was carried out to obtain fundamental information of growth response of interior landscape plants under a fluorescent lighting, a sunlight at indoor. Ficus elastica Roxb. vu. decora Hort, Spathiphyllum 'Clevelandii', Codiaeum variegatum Blume var. pictum Mvell. Arg. 'Exalant' and Cordyline terminalis Kunth var. red edge Hort were examined under 100lux, 500lux, 1,000lux and 2,000lux light intensity consisted of fluorescent lighting and sunlight at indoor condition. Result of experiments are as follows; 1. A Ficus elastica Roxb. var. decora Hort plant growth status was better showed under fluorescent lighting than sunlight. A plant growth status showed the best result under 2,000lux light intensity of fluorescent lighting in cases of all conditions. 2. A Spathiphyllum 'Clevelandii' showed the best effective adaptations under law intensity among experimental plants. A Spathiphyllum 'Clevelandii', plant growth status was better showed under fluorescent lighting than sunlight. A plant growth status showed the best result under 1,000lux light intensity of fluorescent lighting in cases of all conditions. 3. It need the best high establishment of fluorescent lighting among experimental plants for good plant growth. A Codiaeum variegatum Blume var. pictum Mvell. Arg. 'Exalant' plant growth status was better showed under fluorescent lighting than sunlight. A plant growth status was better showed under high light intensity in case of same light source. A plant growth status showed the best result under 2,000lux light intensity of fluorescent lighting. 4. A Cordyline terminalis Kunth var. red edge Hort plant growth status was better showed under fluorescent lighting than sunlight. but, A plant growth status was better showed under $500lux\sim1,000lux$ than 2,000lux in cases of all intensity of fluorescent lighting. while, A plant growth status was better showed under $1,000lux\sim2,000lux$ in cases of all intensity of sunlight.

• Journal of Korea Foresty Energy
• /
• v.19 no.1
• /
• pp.20-29
• /
• 2000

This study was carried out to investigate the effects of shading on the growth of 1 -year-old seedlings of Cornus controversa. The height growth was highest in relative light intensities of 100% and 50%, but relative growth rate in 50% was higher than that in 100% treatment. The growth did not occur under 9% relative light intensity. The root collar diameter growth at different light intensities is similar to height growth. The leaf area was highest in 50% relative light intensity, and the leaf area under the light intensity was small compared with the control. SLA and LAI of seedlings increased with decreasing relative light intensity. The LAR and LWR of seedlings increased with decreasing light intensity, but LWR decreased at 9% relative light intensity. The dry weight of root, stem, leaf and branch, and the number of branch and leaf decreased with decreasing relative light intensity. T/R ratio was highest in 17% and 30% relative light intensity. Lateral root growth decreased with decreasing light intensity except for that in 50% light intensity.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.697-705
• /
• 2023

Along with other heavy metals, arsenic (As) is one among the substances most harmful to living organisms including humans. Owing to its morphological similarity to phosphorus, the uptake of As is influenced by photosynthesis and the phosphorus uptake pathway. In this study, we varied arsenic exposure and light intensity during nutrient solution cultivation of lettuce (Lactuca sativa L.) to determine the effect of these two factors on arsenic uptake, lettuce growth, and electron transfer in photosystem II. In the treatment exposed to 30 μmol L^-1 of arsenic, the shoot arsenic concentration increased from 4.73 mg kg^-1 to 18.97 mg kg^-1 as the light intensity increased from 22 to 122 μmol m^-2 s^-1. The water content and ET2o/RC of the shoots were not affected by arsenic at low light intensity; however, at optimal light intensity, they decreased progressively with arsenic exposure. Increased light intensity stimulated the growth of plant roots and shoots; contrarily, the difference in growth decreased as the concentration of As exposure increased. The results of this study suggest that the effect of As on plant growth is dependent on light intensity; in particular, an increase in light intensity can increase the uptake of As, thereby affecting plant growth and As toxicity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.2
• /
• pp.208-214
• /
• 1986

To establish the evaluation of the fatigue crack growth behavior in 5083-O aluminum alloy, constant load-amplitude fatigue crack growth tests were carried out under the small scale yielding conditions. Crack length and closure of this material were measured by the compliance method using a clip-on gage. The main results obtained as follows: The fatigue crack growth rate against stress intensity factor range .DELTA.K exhibits the trilinear form with two transitions at the growth rate 5.5*10$^{-6}$ and 5.5*10$^{-5}$ mm/cycle, in the so-caled Region II. The trilinear form appears still in the plot of growth rate versus effective stress intensity factor range .DELTA. $K_{eff}$. Stress ratio R affects the relationship of crack growth rates versus .DELTA.K but does not affect the reation of crack growth rate versus .DELTA. $K_{eff}$. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor $K_{max}$, but not on the stress ratio R.o R.R.

• Journal of Korean Society of Forest Science
• /
• v.98 no.5
• /
• pp.584-592
• /
• 2009

The objective of this study was to examine the impact of pruning intensity on the vigor and cambial growth of the treated trees, and on the closure of pruning wounds for one year after pruning treatment. Two tree species, Pinus strobus and Acer palmatum, planted broadly in the urban forest of Korea were selected for the experiment. Intensity of pruning, which was estimated by proportion of removed branches, was categorized into five levels with about 10% intervals from lowest 8% up to 46%. Following parameters were examined; cambial electrical resistance (CER) and the cambial growth of trunk at 30 cm above the ground for the years before and after pruning, the cambial growth of stem at 1.5 cm above the branch bark ridge (BBR) of the pruned branch, and closure of pruning wound for one year after pruning. Tree vigor inferred from CER had a tendency to be weakened as pruning intensity increased in P. strobus, while that of A. palmatum was not affected. The trunk growth decreased significantly when the pruning intensity was higher than 30% in both species. The closure of individual pruning wound was related more to the cambial growth of stem at 1.5 cm above BBR than to the pruning intensity. Comparing the closure rate of pruning wound for one year, P. strobus with 72.1% was faster than A. palmatum with 39.3%, which corresponded with the rate of cambial growth of the two species.

• Journal of Welding and Joining
• /
• v.7 no.1
• /
• pp.28-35
• /
• 1989

The fatigue crack growth behavior in GTA butt welded joints of Al-Alloy 5052-H38 was examined using Single Edge Notched(SEN) specimens. It is well known that welding residual stress has marked influence on fatigue crack growth rate in welded structure. In the general area of fatigue crack growth in the presence of residual stress, it is noted that the correction of stress intensity factor (K) to account for residual stress is important for the determination of both stress intensity factor range(.DELTA.K) and stress ratio(R) during a loading cycle. The crack growth rate(da/dN) in welded joints were correlated with the effective stress intensity factor range(.DELTA.Keff) which was estimated by superposition of the respective stress intensity factors for the residual stress field and for the applied stress. However, redistribution of residual stress occurs during crack growth and its effect is not negligible. In this study, fatigue crack growth characteristics of the welded joints were examined by using superposition of redistributed residual stress and discussed in comparison with the results of the initial welding residual stress superposition.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.2
• /
• pp.47-53
• /
• 1980

Kikukawa-Compliance method using a conventional clip-on gauge was employed to investigate fatigue crack growth and crack closure in 2017-T3 aluminum alloy. The crack growth rate plot against stress intensity range .DELTA.K on a log-log diagram exhibits a bilinear form with a transition at the growth rate of 10$\^$-4/ mm/cycle. The bilinear form appears still in the plot of growth rate versus effective stress intensity range .DELTA.K$\_$eff/. Fatigue crack growth rate could be well represented by .DELTA.K$\_$eff. The experimental results indicate that the effective stress intensity range ratio U depends on the maximum stress intensity factor K$\_$max/, but the stress ratio R does not affect U. The crack opening stress intensity factor K$\_$op/ tends to increase with increasing K$\_$max/ and decrease with increasing .DELTA.K.

• ALGAE
• /
• v.26 no.1
• /
• pp.73-77
• /
• 2011

A dominant planktonic bloom-forming species, Mallomonas elongata was isolated from a small shallow eutrophic pond. The growth characteristics of this species on variable silicate concentrations and light intensities were investigated in laboratory unialgal cultures. In culture condition of $15^{\circ}C$, the maximum population growth and the highest growth rate of M. elongata occurred at a light intensity of $80\;{\mu}mol\;m^{-2}s^{-1}$, and in culture condition of $18^{\circ}C$, it exhibited the maximum population growth and the highest growth rates at a light intensity of $50\;{\mu}mol\;m^{-2}s^{-1}$. Silicate concentration had no effect on the population growth and growth rate of M. elongata.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.2
• /
• pp.54-59
• /
• 2003

The characteristics of the parameters for the probability distribution of fatigue crack growth life, using the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length equals the number of cycle curves that are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratios of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth life seems to follow the 3-parameter Wiubull,, showing a slight dependence on specimen thickness and stress intensity level. The shape parameter, $\alpha$, does not show the dependency of thickness and stress intensity level, but the scale parameter, $\beta$, and location parameter, ${\gamma}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.10a
• /
• pp.301-306
• /
• 2002

The characteristics of parameters for the probability distribution of fatigue crack growth lives by the non-Gaussian random process simulation method is investigated. In this paper, the material resistance to fatigue crack growth is treated as a spatial random process, which varies randomly on the crack surface. Using the previous experimental data, the crack length - the number of cycles curves are simulated. The results are obtained for constant stress intensity factor range conditions with stress ratio of R=0.2, three specimen thickness of 6, 12 and 18mm, and the four stress intensity level. The probability distribution function of fatigue crack growth lives seems to follow the 3-parameter Wiubull and shows a slight dependence on specimen thickness and stress intensity level. The shape parameter, ${\alpha}$, does not show the dependency of thickness and stress intensity level, but the scale parameter, ${\beta}$, and location parameter, ${\upsilon}$, are decreased by increasing the specimen thickness and stress intensity level. The slope for the stress intensity level is larger than the specimen thickness.