• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.409-420
• /
• 2001

Recently a new approach to evaluation of software reliability, one of important attributes of a software system, during testing has been devised. This approach utilizes test coverage information. The coverage-based software reliability growth models recently appeared in the literature are first reviewed and classified into two classes. Inherent problems of each of the two classes are then discussed and their validity is empirically investigated. In addition, a new mean value function in coverage and a heuristic procedure for selecting the best coverage are proposed.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.2
• /
• pp.273-278
• /
• 2016

In order to evaluate the lifespan of high-temperature parts with thermal barrier coating in gas turbines used for power generation, this study was performed on an 80 MW-class gas turbine exceeding 24 k equivalent operating hours. Degradation characteristics were evaluated by analyzing the YSZ (Yttria Stabilized Zirconia) top coat, which serves as the thermal barrier coating layer, the NiCrAlY bond coat, and interface layers. Microstructural analysis of the top, middle, and bottom sections showed that Thermal Growth Oxide (TGO) growth, Cr precipitate growth within the bond coat layer, and formation of diffusion layer occur actively in high-temperature sections. These microstructural changes were consistent with damaged areas of the thermal barrier coating layer observed at the surface of the used blade. The distribution of Cr precipitates within the bond coat layer, in addition to the thickness of TGO, is regarded as a key indicator in the evaluation of degradation characteristics.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2011.11a
• /
• pp.16-18
• /
• 2011

Evaluation of climate change on the rice productivity was conducted using crop growth simulation model, where Odae, Hwaseong, Ilpum were used as a representative cultivar of early, medium, and medium-late rice maturity type, respectively, and climate change scenario 'A1B' was applied to weather data for future climate change at 57sites. When cropping season was fixed, rice yield decreased by 4~35% as climate change which was caused by poor filled grain ratio with high temperature and low irradiation during grain-filling. When cropping season was changed, rice yield decreased by only 0~5% as climate change which was caused poor filled grain ratio with low irradiation during grain-filling period. However, this irradiation decline was less than when cropping season was fixed. Therefore, we need to develop rice cultivars resistant to low irradiation which can maintain high filled grain ratio under poor irradiation condition, and late maturity rice cultivars whose growing period is longer than the present medium-late maturity type.

• International journal of advanced smart convergence
• /
• v.12 no.1
• /
• pp.220-229
• /
• 2023

The development of logistics technology due to the 4th Industrial Revolution and logistics 4.0 has changed the logistics environment from offline to online, and the growth of the online market has accelerated due to the recent increase in non-face-to-face delivery due to COVID-19. Such growth in the online market has expanded the logistics market for delivery, and contributes to creating an advanced logistics ecosystem as last mile services and logistics technologies begin to grow together. As traffic and environmental problems arise as a result, interest in transportation means of cargo increases, and changes to cargo electric vehicles and delivery cycles are being considered. However, since mass transportation of transportation focused on terminal delivery such as cargo electric vehicles and delivery cycles is limited in handling large quantities in urban areas, methods for efficiently transporting cargo while considering the environment are being devised. In order to solve such environmental problems and increase the efficiency of logistics delivery in urban areas, technologies using underground spaces based on existing urban railroads are being developed. In this study, a study was conducted on the establishment of evaluation criteria for selecting a test bed, which is a space for applying the system.

• Journal of Korean Library and Information Science Society
• /
• v.20
• /
• pp.133-153
• /
• 1993

The purpose of this study is to form a different evaluation method of academic libraries in Korea. In order to this product life cycle and product portfolio matrix have been used. While they are based upon products and services, their general concept is useful for library managers as they help to distinguish which books have potential for growth. Writer tried to transform them into book life cycle and book portfolio matrix as a tool for assessing the quality of stock on the library shelves. With this method, writer a n.0, ppraised practically the Sociology Collection of Pusan National University Library by the state of usage and classified them into four groups that were development books, growth books, maturity books, and declining books.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.3
• /
• pp.119-123
• /
• 2013

Most of the world's solar cells in photovoltaic industry are currently fabricated using crystalline silicon. Czochralski-grown silicon crystals are more expensive than multicrystalline silicon crystals. The future of solar-grade Czochralski-grown silicon crystals crucially depends on whether it is usable for the mass-production of high-efficiency solar cells or not. It is generally believed that the main obstacle for making solar-grade Czochralski-grown silicon crystals a perfect high-efficiency solar cell material is presently light-induced degradation problem. In this work, the substitution of boron with gallium in p-type silicon single crystal is studied as an alternative to reduce the extent of lifetime degradation. The diamond-wire sawing technology is employed to slice the silicon ingot. In this paper, the quality of the diamond wire-sawn gallium-doped silicon wafers is studied from the chemical, electrical and structural points of view. It is found that the characteristic of gallium-doped silicon wafers including texturing behavior and surface metallic impurities are same as that of conventional boron-doped Czochralski crystals.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.67-72
• /
• 2000

Demand for now nondestructive evaluation are growing to detect fatigue crack growth behavior to predict long term performance of materials and structure in aggressive environments especially when they are In non-visible area. Acoustic emission technique is well suited to these problems and has drawn a keen interests because of its dynamic detection ability, extreme sensitivity and location of growing defects. In this study, we analysed acoustic emission signals obtained in fatigue and tensile test of high strength fire resistance steel for frame structure with time-frequency analysis methods. The main frequency range is different in the noise and the fatigue crack propagation. It could be classified that it were also generated by composite fracture mechanics of cleavage, dimple, inclusion separation etc.

• Journal of Welding and Joining
• /
• v.28 no.1
• /
• pp.100-106
• /
• 2010

In this paper crack propagation analyses in the dissimilar metal weldment of a nozzle were performed using a finite element alternating method (FEAM). A two-dimensional axisymmetric finite element nozzle model was prepared and welding simulation including the thermal heat transfer analysis and the thermal stress analysis was performed. Initial cracks were inserted at weld and heat affected zone in the finite element model which has welding residual stress distribution obtained from the welding simulation. To calculate crack propagation trajectories of these cracks, a new fatigue crack evaluation module was developed in addition to the previous FEAM program. With the new FEAM fatigue crack evaluation module, crack propagation trajectory and crack growth time were calculated automatically and effectively.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.3
• /
• pp.615-621
• /
• 1999

On the aspect of on-time and development resource use, it is very important to predict the software release time during the software development process. In this paper, we present the optimal release problem based on the evaluation indicator and cost evaluation. And also we show the optimal release point considered with both of them. We applied the Exponential Software Reliability Growth Model(E-SRGM) and Testing-effort dependent Software Reliability Growth Model(Te-SRGM) and decided the software release time according to software reliability indicator. As a result of two models comparison, we verify the Te-SRGM is more adopted in our switching system software.

• Proceedings of the PSK Conference
• /
• 2002.10a
• /
• pp.353.2-353.2
• /
• 2002

5-Arylamino-6-chloro-4.7-dioxoindazoles (DZs) were newly synthesized for the evaluation of antifungal activities. The compounds DZs were prepared by regioselective nucleophilic substitution of 5.6-dichloro-4.7-dioxoindazoles with appropriate arylamines in high yield. DZs were tested for their growth inhibitory activities against Candida species and Aspergillus niger. The MIC values were determined by the two-fold dilution method. In general. DZs showed in vitro antifungal activities. Among the tested compounds, DZ1, 3, 6, 7 and 12 showed potent antifungal activities against Candida species and Aspergillus niger. DZ7 was the most effective in preventing the growth of Candida species.