• Journal of Life Science
• /
• v.7 no.2
• /
• pp.142-148
• /
• 1997

This study was carried out to clarify seasonal changes of chemical compositions and their interrelation in leaves, shoots and berries treated with gibberellin($GA$_{3}$)for seedless grapes in ‘Delaware’grapevines. the clusters were dipped twice with 100ppm $GA_{3}$: 10 days befor and after the full bloom. The reaults obtained as follows; 1. Cumulative growth curve of berry fresh weight showed a double sigmoid curve and the characteristics of three distinctive growth stages(I, II, III)were weekened with $GA_{3}$ treatment. 2. while the contents of ash, total carbon, total nitrogen and total carbohydratd had little reation with edvelopment and ripeness of berries, those of total sugar and starch jad close relation, viz., they decreased with enlargement and maturity fo berries, but increased rapidly after harvest in leaves and shoots. Especially, total sugars in leaves and shoots decreased coincidently with starch-increasing in shoots at November. 3. The contents of total soluble solid and reducing sugar in berries increased rapidly at growth stage III, but those of total titratable acidity and organic acid decreased coincidently with sugar-increasing. 4. The berry-hardness increased until growth stage I, and then stagnated until gtowth stage II, and then increased rapidly at growth stage III. pH of berry-juice decreased until growth stageII, afterwards increased at growth stage III. 5. By correlation and path coefficient analysis between qualitative characters and the ratio of total soluble solid to titratable acidity($^{\circ}$Brix/Acidity), total correlation coefficients were all highly significant. Of these characters, pH and viscosity of berry-juice were positive, but brightness and hardness of berry, negative. The direct effect of pH on $^{\circ}$Brix/Acidity ratio, p4y=0.9090, was large positively and those of berry-hardness and juice-viscosity, p1y=0, 5938, median and, p2y=0, 3550, small, respectively. Direct effect of brightness was negatively small.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.10
• /
• pp.2923-2934
• /
• 2009

This paper presents study on technological forecasting of Next-Generation Display technology. Next-Generation Display technology is one of the emerging technologies lately. So databases on patent documents of this technology were analyzed first. And patent analysis was performed for finding out present technology trend. And the forecast for this technology was made by growth curves which were obtained from forecast models using patent documents. In previous study, Gompertz, Logistic, Bass were used for forecasting diffusion of demand in market. Gompertz, Logistic models which were often used for technological forecasting, too. So, two models were applied in this study. But Gompertz, Logistic models only consider internal effect of diffusion. And it is difficult to estimate maximum value of growth in two models. So, Bass model which considers both internal effect and external effect of diffusion was also applied. And maximum value of growth in Gompertz, Logistic models was estimated by Bass model.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.57-62
• /
• 2018

In this study, we investigated the impurity effect of $Ga_2O_3$ doped thin film by simple doping method using Mg acetate solution. Both undoped $Ga_2O_3$ thin films and Mg-doped $Ga_2O_3$ thin films were grown on Si substrates at 600 and $900^{\circ}C$ for 30 minutes by means of a customized MOCVD method. As a result of the surface analysis, there were no obvious morphological differences by Mg impurity implantation. The surface of the thin film grown at $900^{\circ}C$ was rougher than those grown at $600^{\circ}C$ and polycrystallization was achieved. As a result of the optical property analysis, in the case of the doped sample, the overall emission peak was red shifted and the UV radiation intensity was increased. As a result of the I-V curve, the leakage current of the $600^{\circ}C$ growth thin film decreased by the Mg impurity and the photocurrent of the growth thin film of $900^{\circ}C$ increased.

• Journal of Food Hygiene and Safety
• /
• v.25 no.3
• /
• pp.226-231
• /
• 2010

We aimed at the monitoring medroxyprogesterone acetate (MPA) residue amount in meats and confirmed the safety of its residue in meats. Optimized condition for analytical and instrumental methods was obtained by method validation. The limit of detection (LOD) and limit of quantification (LOQ) were validated at 1.5 and 5.0 ug/kg, respectively. The calibration curve showed good linearity ($r^2$ = 0.9968) within the concentration range of 5.0~50.0 ug/kg. We selected progesterone-d9 for internal standard, The recoveries in fortified meat ranged from 67.5 to 109.56% at the 3 spiking levels. As the regulation of MPA analysis method used by LC-MS/MS on other products have established. We selected 3 species of farm stock products (cattle, pig, chicken) and purchased at the markets of seven major cities. The total 196 of meat including 46 of domestic beef, 43 of import beef, 60 of domestic pork, 12 of import pork and 35 of domestic chicken. No residue of synthetic growth hormones were detected in cattle, pig and chicken samples tested.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.387-397
• /
• 2023

Plant height is a growth parameter that provides visible insights into the plant's growth status and has a high correlation with yield, so it is widely used in crop breeding and cultivation research. Investigation of the growth characteristics of crops such as plant height has generally been conducted directly by humans using a ruler, but with the recent development of sensing and image analysis technology, research is being attempted to digitally convert growth measurement technology to efficiently investigate crop growth. In this study, the canopy height of rice grown at various nitrogen fertilization levels was measured using a laser scanner capable of precise measurement over a wide range, and a comparative analysis was performed with the actual plant height. As a result of comparing the point cloud data collected with a laser scanner and the actual plant height, it was confirmed that the estimated plant height measured based on the average height of the top 1% points showed the highest correlation with the actual plant height (R² = 0.93, RMSE = 2.73). Based on this, a linear regression equation was derived and used to convert the canopy height measured with a laser scanner to the actual plant height. The rice growth curve drawn by combining the actual and estimated plant height collected by various nitrogen fertilization conditions and growth period shows that the laser scanner-based canopy height measurement technology can be effectively utilized for assessing the plant height and growth of rice. In the future, 3D images derived from laser scanners are expected to be applicable to crop biomass estimation, plant shape analysis, etc., and can be used as a technology for digital conversion of conventional crop growth assessment methods.

• Journal of Korean Society of Forest Science
• /
• v.56 no.1
• /
• pp.51-65
• /
• 1982

The growth characteristics and appropriate fertilizer-managements in the rejuvenating bamboo grove were studied with Phyllostachys reticulata. The bamboo soil was the sandy loam with rich humus. In the fertilized plots, the N-fertilizer was significantly absorbed, and it was necessary to fertilize the K-fertilizer continuously. According to the development of rejuvenating after flowering, the temperature and relative illumination became lower. while the moisture became higher. The relationship between the diameter at eye height (D) and the culm length (H) of each bamboo can be expressed as follow; $H=2.5538D^{0.5031}$ The leaf area is the major factor for the production of the bamboo grove. Therefore in the rejuvenating grove, we should refrain form pruning or felling of not -flowering bamboo. The theoretical distribution of the internodal length was obtained by the distribution curve line of the internodal length derived from the regular distribution curve line. Relatively long and even internodal length was found in the fertilized plots 2 and 4. The relation between $D^2H$ and dry weight of culm or dry weight of the above ground part were given by linear regression in both relations respectively on the logarithmic coordinates, but the propertional relation was not established in these relations. The biomass of the above ground part obtained by the allometry method showed high values in the fertilized plots 2.5 and 6. The appropriate amounts of the three elements, N, P and K for the maximum dry matter were 24.19, 15.51, 8.63 kg/10a, respectively.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.3
• /
• pp.2053-2058
• /
• 2013

Background: Formation of new blood vessels is necessary for the development and spread of neoplasms more than 1 mm3 in volume, angiogenesis being responsible for formation of new from pre-existing blood vessels. Vascular endothelial growth factor (VEGF) is pivotal and the best studied angiogenic factor in all human cancers. Therefore we designed this study to investigate the role of VEGF-A and VEGF-C in prostate cancer in comparison with BPH controls in a north Indian population. Methods: In this case-control study a total of 100 subjects were included on the basis of confirmed histopathological reports, out of which 50 were prostate cancer patients and the other 50 were BPH patients with PSA levels >2 ng/ml and abnormal digital rectal examination (DRE) findings during September 2009 to August 2011 from the Department of Urology, KGMU, Lucknow, India. Plasma levels of VEGF were determined using quantitative immunoassay (ELISA-enzyme linked immunosorbent assay). Statistical analysis was carried out using SPSS 15.0 version. Results: The mean age of prostate cancer ($67.6{\pm}5.72$) patients was significantly higher (p=0.005) than BPH ($63.6{\pm}7.92$) patients. Expression of VEGF-A was not significantly higher in disease stage C1 than D1 or D2 and A or B (p=0.13) while the level of VEGF-A was significantly higher (p=0.04) in prostate cancer as compared to BPH subjects (PCa=13.0 pg/ml, BPH=6.8 pg/ml). Levels of VEGF-C were similar in both groups (PCa=832.6 pg/ml, BPH=823.7 pg/ml). In ROC curve, the area under curve (AUC) was 0.70 (95%CI: 0.60-0.80) and the cut-off value for which a higher proportion of patients was correctly classified (20%) was 26.0 pg/mL. Conclusion: Although VEGF-A is increased in cancer prostate patients a statistically significant correlation could not be established in this study. VEGF-C was not found to be a useful biomarker.

• 한국노년학
• /
• v.29 no.4
• /
• pp.1611-1628
• /
• 2009

It is well known that health and psychosocial factors are closely associated with depressive symptoms. Due to limitations in available data and analysis methods, however, little is known about the effects of health and psychosocial factors on depression trajectory. In order to address the limitations, this study examines the predictors of depression trajectory using latent growth curve modeling involving individuals aged 60 and over who participated in the Korean Welfare Panel Study (N=4,919). Controlling for socioeconomic variables, health and psychosocial variables were cross-sectionally associated with depressive symptoms, which is consistent with previous findings. However, the effects of health and psychosocial variables on the rate of depressive symptom change varied. Health variables were significantly associated with the levels of depressive symptoms at wave 1, but these were not significantly associated with the rate of depressive symptoms change. By contrast, although psychosocial variables were significantly associated with depressive symptoms at wave 1, the effects of psychosocial variables on the rate of depressive symptom change varied. Specifically, while self-esteem and family relationship were positively associated with the rate of depressive symptom change, social relationship was negatively associated with the rate of depressive symptom change. Based on the findings, this study discussed implications for intervention and future research.

• Journal of Life Science
• /
• v.17 no.10
• /
• pp.1321-1329
• /
• 2007

Deer antler tissue contains the most rapidly growing bone in the animal kingdom. Thus, it is likely that growing antler tissue is a rich source of local paracrine bone-stimulating factors. Growth factors, at least the insulin-like growth factor (IGF), control the bone-remodelling process. In this study, we tried to isolate and purify IGF-I from fresh antler tissue by the routine isolation and purification of protein. The purification involved ammonium sulfate precipitation, DEAE-Sepharose CL-60 ion-exchange chromatography, CM-Sepharose CL-6B ion-exchange chromatography, and Sephadex G-50 chromatography. Purified fractions from each step were analyzed by high-performance liquid chromatography (HPLC), SDS polyacrylamide gel electrophoresis (SDS-PACE), Dot-blot, and Western-blot methods. Furthermore, the quantification of partially purified IGF-I was calculated by enzyme-linked immunosorbent assays (ELISA) using antibody to human recombinant IGF-1. SDS-PAGE analysis of the final fraction yielded two molecular bands and the signal band was at 12 kDa on the Western-blot film. This purified IGF-I fraction showed a peak at retention time of eight min. The quantity of IGF-I in 20 g deer antler tissue as starting weight was calculated using a standard curve to be 2910 ng/ml, and total IGF-I amount is 0.291 g. The results show that IGF-I, which can be found in deer antler, can be partially purified and quantified by classic protein isolation methods.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2007

Demand forecasting methods for a consumer product such as TV or refrigerator are widely known. However, sales forecast for a brand new product cannot be estimated using conventional forecasting methods. This study proposes a five-step procedure in forecasting a newly developed product. Step one defines functions in a High Touch product in order to estimate relative attraction of the product to consumer group. In step two, for a comparison purpose, a compatible product that is successfully penetrated into market is selected. Step three breaks a target population into many segments based on demography. Step four calculates relative attraction between the High Touch product and the compatible product. Finally, market penetration rate of the High Touch product is estimated using a bell-shaped diffusion curve of the compatible product. The process offers a method to estimate potential demand and growth pattern of the new High Touch product.