• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.553-559
• /
• 1998

This thesis studied to evaluate the fatigue behavior and propagation of rail steel under welding line. Test of crack growth was performed by all member of rail under constant amplitude loading at the structures laboratory in Hongik University. The effect of the following parameters with initiated crack length on the bottom edge of rail were studied. Here, fracture mechanics mode is opening mode. and Testing Material is KS50N Rail. From analysis and experimented result on the three Point bending in the lab, This paper presented a effect of crack growth , shape and remaining service life. Further more, according to the variable crack length, variable section and the ratio of section the fatigue behavior and propagation were studied.

• 한국결정성장학회지
• /
• 제19권4호
• /
• pp.184-189
• /
• 2009

$Ni(NO_3)_2{\cdot}6H_2O$를 원료로 하여 고온에서 열처리함으로써 얻어진 NiO 나노 결정의 성장거동에 대하여 고찰하였다. 성장된 결정의 상은 정 8면체의 구조를 갖고 있었으며, 200${\sim}$500 nm 크기로 성장하였다. $900^{\circ}C$에서 2시간 동안 열처리하였을 때, $600^{\circ}C$ 이하의 열처리 온도에서 나타나지 않았던 (110)과 (100) facet이 생성되는 것을 관찰할 수 있었다 또한 $900^{\circ}C$ 열처리에서는, $600^{\circ}C$ 이하의 온도에서 열처리 한 시료보다 크기가 작은 결정상이 neck을 형성하면서 성장하였음을 관찰하였다.

• 비파괴검사학회지
• /
• 제27권1호
• /
• pp.48-57
• /
• 2007

사용 중인 항공기 구조를 모사하여 리벳구멍 주위에 피로균열이 존재하는 AA2024-T3 박판을 CFRP 복합재 패치로 접합하여 보수한 후 피로균열 성장거동을 음향방출(AE)을 측정하면서 관찰하였다. 패칭의 효과로 균열성장속도의 뚜렷한 감소와 균열이 인접한 리벳 구멍으로 전파되는 시간을 지연시키는 효과가 있음을 확인하였다. 그리고 패칭 후 균열성장에 의해 탐지된 신호와 패치와 알루미늄 사이의 접합계면 분리에 의한 신호의 구별 가능성을 다변량 자료분석 기법인 주성분분석을 통해 알아보았다. 그 결과 균열성장에 따른 AE신호는 계면분리에 따른 AE신호에 비해 중심주파수가 높고 작은 에너지를 가지는 반면, 계면분리 신호는 균열성장 신호에 비해 상승시간이 길고 중심주파수가 상대적으로 낮으며 비교적 큰 에너지를 가진 것으로 나타났다. 따라서 AE신호의 유형인식 방법은 AE 발생원의 위치표정 결과와 결합할 경우 패치 접합으로 보수된 구조에서의 피로균열 성장거동을 예측하는 방법으로 충분히 활용될 수 있다.

• 대한기계학회논문집A
• /
• 제38권12호
• /
• pp.1317-1323
• /
• 2014

본 연구의 목적은 마찰교반용접된 Al7075-T651의 피로균열전파 거동에 미치는 시험편의 채취방향의 영향을 고찰하기 위한 것이다. 피로균열전파 실험은 마찰교반용접된 공시재로부터 모재와 용접재에 대하여 CT 시험편을 채취하여 일정응력확대계수범위 제어하에서 수행되었다. 균열이 용접선에 수직하여 전파하는 것(TL 시험편으로 명명)과 균열이 용접선과 나란히 전파하는 시험편(LT 시험편으로 명명)에 대하여 3가지 다른 응력확대계수범위에서 실험이 수행되었다. 시험편의 채취 방향에 따라 피로균열전파거동에 주요한 영향을 미침을 알 수 있었다. Paris 법칙에 적합시킨 결과 지수 m값은 WM-LT 시험편이 3.56으로 가장 높게 나타났다.

• Structural Engineering and Mechanics
• /
• 제7권2호
• /
• pp.225-240
• /
• 1999

This paper presents a mechanistic approach to uniaxial viscoelastic constitutive modeling of asphalt concrete that accounts for damage evolution under cyclic loading conditions. An elasticviscoelastic correspondence principle in terms of pseudo variables is applied to separately evaluate viscoelasticity and time-dependent damage growth in asphalt concrete. The time-dependent damage growth in asphalt concrete is modeled by using a damage parameter based on a generalization of microcrack growth law. Internal state variables that describe the hysteretic behavior of asphalt concrete are determined. A constitutive equation in terms of stress and pseudo strain is first established for controlled-strain mode and then transformed to a controlled-stress constitutive equation by simply replacing physical stress and pseudo strain with pseudo stress and physical strain. Tensile uniaxial fatigue tests are performed under the controlled-strain mode to determine model parameters. The constitutive equations in terms of pseudo strain and pseudo stress satisfactorily predict the constitutive behavior of asphalt concrete all the way up to failure under controlled-strain and -stress modes, respectively.

• 대한기계학회논문집A
• /
• 제22권1호
• /
• pp.160-169
• /
• 1998

The purpose of this study for the prediction of fatigue crack propagation behavior, Stress Intensity Factor(F) of round bar with 3-Dimensional half circular, semi-elliptical icro surface crack under rotary bending stress for the variable aspect, size, rotation angle was analyzed by Boundary Element Method (BEM). It is predicted that behavior of crack growth is half circular or circular crack (b/a.geq.1) and propagate to b/a.leq.0.85.

• 한국결정성장학회지
• /
• 제17권1호
• /
• pp.11-17
• /
• 2007

The spherical NiZn ferrite particles were prepared by ultrasonic spray pyrolysis with mixed solution of aqueous metal nitrates. The NiZn ferrite particle was observed with nano-sized primary particles of about 10 nm or less before annealing which represented as paramagnetic behavior measured at 77 K and room temperature. The typical abnormal growth of primary particles like polyhedral primary particles was observed by annealing at 1273 K with Zn-concentration dependency. The XRD patterns showed good crystallinity of NiZn ferrite powder after annealing. In annealing process, the intra-particle sintering phenomenon was observed and the spherical particle morphology was collapsed at 1673 K. The saturation magnetization of NiZn ferrite powder for each annealing temperature was decreased with measuring temperature of $77{\sim}$300K.

• 한국안전학회지
• /
• 제6권3호
• /
• pp.21-26
• /
• 1991

In this study, a crack closure behavior of Al-alloy 5052-H38 was investigated. The fatigue test was performed by the four-point bending test under the contast amplitude load. Stress ratio R was changed from-1.0 to 0.5. To mcasure the fatigue crack opening point, the graph of load vs. subtracted displacement by computer program was obtained from the X - Y plotter. In order to gain the displacement data, a strain gage was attached at the back surface against the notched side. Uslng the conception of crack closure and influence of on crack growth rate a model for crack growth rate is developed for Al-alloy 5052-H38.

• 품질경영학회지
• /
• 제26권3호
• /
• pp.108-129
• /
• 1998

Many empirical research surveys have su, pp.rted that Organizational Citizenship Behavior(OCB) is influenced by or closely related with leadership styles. The primary purpose is to test the moderating effects of structural factors (formalization, centralization) and personal factors(growth needs, sex, age, tenure, rank, occuption, school carrer) between 2 leadership styles and 2 OCB factors. For the analytical purpose of this article, Fisher's Z-transformation and SGC(split groups correlations) methods were introduced. Generally 2 leadership styles are found to influence on altruism and conscientiousness respectively. Out of 36 cases, only 2 cases were significant in moderating effects. Based on empirical results, there is no moderating effects in conscientiousness. But altruism is found to more closely related with employee-centered leadership in low centralized group than in high centralized group, and more closely related with job-centered leadership in low growth-needs group than in high growth-needs group.

• 한국분말재료학회지
• /
• 제4권2호
• /
• pp.90-99
• /
• 1997

Densification behavior and grain growth of tool steel powder compacts during pressureless sintering, sinter forging, and hot isostatic pressing were investigated. Experimental data were compared with results of finite element calculations by using the constitutive model of Abouaf and co-workers and that of McMeeking and co-workers. Densification and deformation of tool steel powder compacts were studied by implementing power-law creep, diffusional creep, and grain growth into the finite element analysis. The shape change of a powder compact in the container during hot isostatic pressing was also studied. The theoretical models did not agree well with experimental data in sinter forging, however, agreed well with experimental data in hot isostatic pressing.