• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.36 no.6
• /
• pp.606-613
• /
• 2003

This study investigated the effects of food type (condensed freshwater Chlorella, dried Chlorella, dried Spirulina, dried Schizochytrium, baker's yeast and $\omega-yeast$) and amount, and supplementation of vitamin $B_{12}$ on the growth of freshwater rotifer (Brachionus calyciflorus) in high density culture. Growth of rotifers fed condensed freshwater Chlorella was the highest and its density ranged $7.65-8.14{\times}10^3\;inds./mL.$ The primary lipid acids of rotifers fed condensed freshwater Chloyella were linoleic and linolenic, and their amount ($\%$ of total fatty acids) were $48.8\%\;and\;26.8\%,$ respectively. This suggests that condensed freshwater Chlorella would be an effective diet for high quality and quantity rotifers, which in turn serve as live food for freshwater fish larvae. Growth rate of rotifers with Chlorella supplementation increased as amount of supplementation increased up to 1.5 and 2.5 mg at 28 and $32^{\circ}C$, respectively. However, undissolved ammonia toxicity and packing volume of Chlorella in culture medium, reached the optimal conditions for the stable and effective cultivation of rotifers when amount of condensed freshwater Chlorella was 1.5 mg in dry weight per 1,000 rotifers at $28^{\circ}C\;and\;32^{\circ}C$ Growth of rotifers in condensed freshwater Chlorella with vitamin $B_{12}$ supplementation was significantly higher than that of rotifers without supplementation. However, no significant difference was found among the different concentrations of vitamin $B_{12}.$ Therefore, vitamin $B_{12}$ could improve the growth of rotifers (B. calyciflorus).

• Journal of Integrative Natural Science
• /
• v.11 no.4
• /
• pp.209-211
• /
• 2018

A zinc oxide thin film doped with aluminum was deposited by RF sputtering. The deposition temperature of the sputter chamber was kept constant at $350^{\circ}C$, the power supplied to the chamber was 75 W, the oxygen flow rate was changed to 10 sccm and 20 sccm, and the thin film deposition time was changed to 120 and 180 minutes. The structures of the deposited zinc oxide thin films were analyzed by van der Waals method using an X-ray diffractometer. As a result of X-ray diffraction, the amount of oxygen supplied to the zinc oxide thin film increased, and the surface growth of the (002), (400), (110), and (103) planes showed a change with increasing deposition time. Moreover, as the amount of oxygen supplied to the zinc oxide thin film increased, their shape was observed to be coarse, and the thin film' s particles shape was correlated with the oxygen chemical defect introduced.

• Journal of Bio-Environment Control
• /
• v.10 no.2
• /
• pp.125-131
• /
• 2001

The objective of this study was to estimate the amount of nutrient and water taken up at different growth stages by cucumber (Cucumis sativus L. cv. Eunsung Backdadagi) grown in a closed substrate culture system. The amount of nutrient solution absorbed increased in proportion to days from planting at the first stage of growth and depended on the level of radiation after the mid stage of growth. After the mid growth stage, the amount of nutrient solution absorption was maintained at 80-100 mg.MJ$^{-1}$ . Total amount of absorbed inorganic ions except S increased since the nutrient solution absorption increased with the level of radiation, although the absorption rate of each inorganic ion declined. A highly significant correlation ($R^2$>0.9) was found between amount of inorganic ions absorbed and days after planting, LAI, total dry weight and leaf dry weight, but not with CGR. Correlation coefficient between days after planting and the amount of nutrient solution absorbed per unit radiation level was 0.92. Correlation coefficient between leaf area an the amount of nutrient solution absorbed per unit radiation level was 0.97. Regression of the amount of nutrient solution absorbed per unit radiation level and nutrient ions uptake showed a high significance ($R^2$>0.9).

• Journal of Practical Agriculture & Fisheries Research
• /
• v.17 no.1
• /
• pp.157-162
• /
• 2015

The result of respiration amount on the growth step of P. ostreatus shows as follows. On the early and middle mycelial culture step, respiration amount per minute in the 16 bottles(850cc) maintained 184.75ppm, 185.8ppm respectively. Therefore we are able to calculate how much fresh air replace in the growth chamber for optimization optimal CO₂ amount. This means early respiration amount was increased than middle a little on the proceeding mycelial culture. On the early, middle, last and post harvest growth step, the respiration amount per minute in the 16 bottles (850cc) maintained 154.5ppm, 148.1ppm, 157.1ppm and 101.6ppm respectively.

• Journal of Korea Foundry Society
• /
• v.26 no.3
• /
• pp.140-145
• /
• 2006

Sr, added in the hypereutectic Al-Si alloys, is absorbed on the surfaces of primary Si as well as eutectic Si, and can change the growth mode of primary Si from non-faceted to faceted mode, as the amount of Sr increases larger than 0.04 wt.%, even though it cannot affect the grain size of primary Si, significantly. The EBSD analysis shows that the traction of ${\Sigma}3$ boundary(twin boundary) increases as the amount of Sr in the hypereutectic Al-Si alloys increase until the over-modification occurs at 1.6 wt.%Sr and proves that the change in growth mode of primary Si results from the change of TPRE growth to IIT growth.

• Journal of Ginseng Research
• /
• v.3 no.2
• /
• pp.113-126
• /
• 1979

This study was undertaken to assess the effect of the Korean red ginseng extracts on the growth of lactic acid bacteria, such as Lac. acidophilus and Str. thermophilus. The results are summarized as follows: 1. The growth of all the lactic acid bacteria tested in this study was not influenced when the skim milk was added with the red ginseng extracts in concentration of less than 4.0%. But the growth was remarkably inhibited in the presence of 8.0% red ginseng extracts in skim milk. 2. Titratable acidity was more or less increased by addition of red ginseng extracts as compared with control except when the amount of 8.0% red ginseng extracts were added into skim milk. 3. No particular effect was observed in the growth of lactic acid bacteria in case of addition of saponins. But the remarkable inhibitory effect was observed in the skim milk with the amount of 1.2mg/ml the fractions extracted by ethyl ether from red ginseng extracts.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04b
• /
• pp.100-103
• /
• 2000

In the case of immobilizing of glucose oxidase into polypyrrole (PPy) using electrosynthesis, the glucose oxidase (GOx) forms a coordinate bond with the polymers backbone. However, because of intrinsic insulation and net-chain of the enzyme, the charge transfer and mass transport are obstructed during the film growth. Therefore, the film growth is dull. We synthesized the enzyme electrode by electropolymerization added some organic solvent. A formative seeds of film growth is delayed by adding ethanol. The delay is induced by radical transfer between ethanol and pyrrole monomer. The radical transfer shares the contribution of dopant between electrolyte anion and GOx polyanion. This may lead to increase amount of immobilized the enzyme in PPy. For the UV absorption spectra of synthetic solution before synthesis and after, in the case of ethanol added, the optical density was slightly decreased for the GOx peaks. It suggests amount of GOx in the solution was decreased and amount of GOx in the film was increased. We established qualitatively that amount of immobilization can be improved by adding a little ethanol in the synthetic solution. It is due to radical transfer reaction. The radical transfer shares the contribution of dopant between small and fast electrolyte anion and big and slow GOx polyanion.

• Journal of the Korean Ceramic Society
• /
• v.35 no.4
• /
• pp.413-419
• /
• 1998

${\beta}$-silicon carbides with yttrium aluminum garnet of 2,5,10 mol% were prepared by a liquid--phase sint-ering and the microstructural evolution and phase transformation were investigated during sintering as functions of liquid-phase amount and sintering time. The rate of grain growth decreases with the addition of the amount of yttrium aluminum garnet (YAG) in the SiC starting powder however the apparent density and the aspect ratio of grains in sintered body increase. The phase transformation from ${\beta}$-SiC to ${\alpha}$-SiC were dependent on the liquid-phase amount and sintering time.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.61-70
• /
• 2000

This study was carried out to improve the tobacco field condition and to determine the effect of lime amount and application time on soil pH, yield, and quality of leaf tobacco. Lime was applied to the tobacco field by determined amounts according to different pH level. The changes of soil pH, growth of tobacco, yield, and quality of KF109 and Br21 tobacco were surveyed by time lapse. The target pH value in tobacco field soil can be reached at 6 weeks after lime application, and then the soil pH was lowered slightly after that time. The lime amount needed to reach target pH was decreased 40 % in the same tobacco field after 1 year. Though the initial growth rate of flue-cured tobacco in the field of pH 7.0 was lower than that of conventional tobacco field, the field of pH 7.0 showed the highest yield after the maximum growth stage. The quality of cured leaf tobacco in the field of pH 7.0 applied lime at spring season was slightly lowered compared with that in conventional. This results indicated that the best pH condition in tobacco field for the best tobacco growth was 6.5 and the proper time of lime application was fall season of previous year by application of the whole quantity.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.488-503
• /
• 1999

The present paper considers the constraint effect on J-R curves under the two-parameter $J-A_2$ controlled crack growth within a certain amount of crack extension. Since the parameter $A_2$ in $J-A_2$ three-term solution is independent of applied loading under fully plasticity or large-scale defor-mation $A_2$ is a proper constraint parameter uring crack extension. Both J and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and $A_2$ are used to char-acterize the resistance curves of ductile crack growth using J as the loading level and A2 as a con-straint parameter. Approach of the constraint-corrected J-R curve is proposed and a procedure of transferring the J-R curves determined from standard ASTM procedure to non-standard speci-mens or real cracked structures is outlined. The test data(e.g. initiation toughness JIC and tearing modulus $T_R$) of Joyce and Link(Engineer-ing Fracture Mechanics 1997, 57(4) : 431-446) for single-edge notched bend[SENB] specimen with from shallow to deep cracks is employed to demonstrate the efficiency of the present approach. The variation of $J_{IC}$ and $T_R$ with the constraint parameter $A_2$ is obtained and a con-straint-corrected J-R curves is constructed for the test material of HY80 steel. Comparisons show that the predicted J-R curves can very well match with the experimental data for both deep and shallow cracked specimens over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. over a reasonably large amount of crack extension. Finally the present constraint-corrected J-R curve is used to predict the crack growth resistance curves for different fracture specimens. The constraint effects of specimen types and specimen sizes on the J-R curves can be easily obtained from the constrain-corrected J-R curves.