• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.259-259
• /
• 2015

Single crystalline indium-tin-oxide (ITO) nanowires (NWs) were grown by sputtering method. A thin Ni film of 5 nm was deposited before ITO sputtering. Thermal treatment forms Ni nanoparticles, which act as templates to diffuse Ni into the sputtered ITO layer to grow single crystalline ITO NWs. This Ni diffusion through an ITO NW was investigated by transmission electron microscope to observe the Ni-tip sitting on a single crystalline ITO NW. Meanwhile, a single crystalline ITO structure was found at bottom and body part of a single ITO NW without remaining of Ni atoms. This indicates the Ni atoms diffuse through the oxygen vacancies of ITO structure. Rapid thermal process (RTP) applied to generate an initial stage of a formation of Ni nanoparticles with variation in time periods to demonstrate the existence of an optimum condition to initiate ITO NW growth. Modulation in ITO sputtering condition was applied to verify the ITO NW growth or the ITO film growth. The Ni-assisted grown ITO layer has an improved electrical conductivity while maintaining a similar transmittance value to that of a single ITO layer. Electrically conductive and optically transparent nanowire-coated surface morphology would provide a great opportunity for various photoelectric devices.

• Journal of Biosystems Engineering
• /
• v.29 no.2
• /
• pp.109-120
• /
• 2004

To obtain basic information for precision agriculture, spatial variability of rice growth condition was evaluated in 100m ${\times}$100m paddy field. The rice growth condition of four hundred locations in the field were investigated to analyze the spatial variability of their properties ; SPAD, plant length and tiller number. Geostatistical analysis was carried out to examine within-field spatial variability using semivariograms and kriged maps as well as descriptive statistics. Descriptive statistics showed that the coefficient of variation for SPAD, plant length, and tiller number exceeded 5.70 %, suggesting a relatively high variability. Geostatistical analysis indicated a high spatial dependence for all the properties except for the second tiller number. The range of spatial dependence was about 20 m for SPAD, plant length, and tiller number. Based on the results of spatial dependence, kriged maps were prepared for the properties to analyse their spatial distribution in the field. The results reflected the history of field management. In conclusion, the need for site-specific field management and possibility of precision agriculture were demonstrated even in an almost flat paddy field.

• KSBB Journal
• /
• v.30 no.3
• /
• pp.97-102
• /
• 2015

This study aimed to evaluate the potential plantgrowth promoting effects of potassium polyacrylate, a superabsorbent polymer, and Bacillus sp. SH1RP8, a family of plant-growth-promoting bacteria. Potassium polyacrylate was selected as the polymer for use due to its high molecular weight and its ability to retain and continuously supply moisture. Plant-growth-promoting rhizobacteria (PGPR) were isolated from the soil and applied to plants growing in dry environments, such as saline conditions. The moisture absorption and retention abilities of potassium polyacrylate were evaluated at a high temperature ($50^{\circ}C$) and in a dry condition, during which time the polymer showed a water retention potential of 19606.07% after 29 days. To overcome the reaming problem in the soil environment, natural polymers (such as cellulose) were mixed with the potassium acrylate. The shoot growths of Peucedanum japonicum Thunb and Arundo donax were significantly enhanced when treated with the mixture of the isolated rhizosphere bacterium SH1RP8 and potassium polyacrylate (63.5 and 124.3%, respectively).

• Journal of the Korean Ceramic Society
• /
• v.15 no.3
• /
• pp.157-167
• /
• 1978

The batch compositions and physical properties of slag-ceramics were studied with respect to their formability from the molten state and conditions of nucleation and crystal growth treatment. The selected batch compositions for nucleation and growth studies were slag, 56%; silica sand, 28%; $Na_2O＋MgO$, 8% and $TiO_2＋$chromite, 8%. The optimum nucleation condition was the temperature of 75$0^{\circ}C$ with 6 hrs. holding time and the optimum growth condition was the temperature 975$^{\circ}C$ with zero holding time. The slag-ceramics prepared under the above conditions showed the best developed microtexture. The grown crystals were identified as diopside with the average grain size of 5.7$\mu\textrm{m}$, and the amount of crystal grown were about 53% by weight. The prepared specimens of slag-ceramics showed the microhardness, 793kg/$\textrm{mm}^2$; MOR, 1,050 kg/$\textrm{cm}^2$ and thermal expansion coefficient, $85{\div}10^{-7}$cm/cm/$^{\circ}C$($25^{\circ}C$~$700^{\circ}C$).

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.92-98
• /
• 2005

This study was performed to get the basic information concerned to the optimum culture condition of Inonotus obliquus. Several solid media, PDA, MEA and Czapek-Dox, and three liquid media were adopted for the in vitro cultivation. Some main features of the fungal morphological characteristics under cultivation conditions were observed and described. Preliminary results showed that appearance of the mycelial mat, hyphal size and substrate pigmentation differed according to the media. The PDA medium was the most favorable substrate for the growth on solid culture, followed by MEA and Czapek-Dox media. Concerned to the addition of amino acids, 5 amino acids, such as alanine, alginine, isoleucine, leucine and threonine, enhanced to the mycelial growth. Isoleucine was shown the best fungal growth. An important morphological hyphal structure for the fungus, the setae, was found in abundance and diverse its shape and size. In liquid culture, fresh potato broth was the best growth stimulant of the fungus, followed by Malt extract and potato broth. Addition of yeast extract to the liquid media had improved the biomass, but not laccase production.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.2
• /
• pp.90-94
• /
• 1998

This study aims at analyzing to treeing in the solid-solid interface which is insulation type of cable junction parts, the proceeding of tree-growth and electrical breakdown were research in the study. Interface was made artificially to detect how it influenced the insulating ability of the whole system, the specimen were XLPE generally used in cable. The interface conditions were divided into two parts. First condition being the one focused on the surface of interface, it was treated with sand paper (#80, #600, #1200). For the second condition, the pressure of interface was varied as the value of 1, 5, 10 [$kg/cm^2$]. Using above conditions, treeing and breakdown properties on tree-growth were respectively compared in details. As a result, breakdown time was shorter for the full range of supplied voltage in the case of interface existed in the joint than non-existed interface. In the case of existed interface, the interface which had high-interface pressure and painted with silicon insulating oil was the best in the aspect of breakdown characteristics.

• Proceedings of the KSME Conference
• /
• 2000.04b
• /
• pp.404-409
• /
• 2000

Growth characteristics of silica particles have been studied experimentally using in situ sampling technique from $H_2/O_2TEOS$ diffusion flame with carefully devised sampling probe. Verification of sampling result was done through new method and effects of flame condition and TEOS flow rate on growth characteristics of silica particles were investigated. By comparing particles sampled by thermophoretic sampling in flame with those by collector sampling after probe, particles do not change before and after probe sampling, which was clearly proved from the fact that the result of TEM image analysis makes good agreement with that of SMPS measurement. As flame temperature increases, the effect of coalescence or sintering becomes important mechanism during growth of silica particles, resulting in canceling the effect of coagulation, which makes mean diameter of silica particles increase slowly. With increase in TEOS flow rate, the number concentration of generated silica particle increases but residence time of particles in flame decreases. As a result, there exists upper limit to which the diameter of silica particle increases under same flame condition.

• KSBB Journal
• /
• v.11 no.1
• /
• pp.52-57
• /
• 1996

Bovine aortic smooth muscle cells cultured on the slide glass were exposed to sheared flow up to 120 hours in flow chamber to see the effect of shear stress on cell growth in wall shear stresses of 0 to 26dyn/$cm^2$. From lactate dehydrogenase concentration measurement of the circulating medium, it was shown that sheared flow in the shear stress range did not remove additional smooth muscle cells from the slide glass compared with cells in stationary condition. According to smooth muscle cell counting per$cm^2$ of the surface, smooth muscle cells grew fastest in the stationary condition. As the wall shear stress increased, the growth of cells became slower. When the wall shear stress increased over 17dyn/$cm^2$, cell growth was not observed throughout the experiment.

• Journal of Korean Society of Forest Science
• /
• v.4 no.1
• /
• pp.33-38
• /
• 1965

It has already been noted that some tree species, denoted as tolerant species, endure to behavior shadiness in growth than those species, denoted as intolerant species, since this fact of tolerance must be involved in silvicultural practice, the present author, with pinus rigida, pinus Thunbergii, and Buxus koreana, investigated the relation of degree of shadiness to soil moisture condition. Because tolerant and intolerant trees must be considered from the standpoint of their ability to use any of the factors that are likely to be at low concentration in the dense or open forest. The observed results may be summarized as follows : 1. The ability of tolerance of the species to shadiness is differently concluded by the base with which the analysis was made, i.c. Height, growth, diameter growth, T-R ratio or dry matter increase and so on. Regarding this point root collar increment or dry matter increase were considered more reasonable bases for discussing the tolerability. 2. When total length growth, including both stem and root, is taken as standard for the comparison of the ability of tolerance for each species, higher soil moisture condition and thicker shadeniss lessened the ability of pinus rigida, seedlings. Pinus Thunbergii, showed. However more moisture resistant than pinus rigida. Buxus koreana, seemed to have stronger ability of tolerance than any others. 3. When total dry matter content taken as standard, the results obtained are given in Fig, 3. In pinus rigida, the soil moisture supplemented the lack of light.

• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.61-70
• /
• 2000

This study was carried out to improve the tobacco field condition and to determine the effect of lime amount and application time on soil pH, yield, and quality of leaf tobacco. Lime was applied to the tobacco field by determined amounts according to different pH level. The changes of soil pH, growth of tobacco, yield, and quality of KF109 and Br21 tobacco were surveyed by time lapse. The target pH value in tobacco field soil can be reached at 6 weeks after lime application, and then the soil pH was lowered slightly after that time. The lime amount needed to reach target pH was decreased 40 % in the same tobacco field after 1 year. Though the initial growth rate of flue-cured tobacco in the field of pH 7.0 was lower than that of conventional tobacco field, the field of pH 7.0 showed the highest yield after the maximum growth stage. The quality of cured leaf tobacco in the field of pH 7.0 applied lime at spring season was slightly lowered compared with that in conventional. This results indicated that the best pH condition in tobacco field for the best tobacco growth was 6.5 and the proper time of lime application was fall season of previous year by application of the whole quantity.