• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5400-5418
• /
• 2016

Femtocells are envisioned as a key solution to embrace the ever-increasing high data rate and thus are extensively deployed. However, the dense and random deployments of femtocell access points (FAPs) induce severe intercell inference that in turn may degrade the performance of spectral efficiency. Hence, unrestrained proliferation of FAPs may not acquire a net throughput gain. Besides, given that numerous FAPs deployed in ultra-dense networks (UDNs) lead to significant energy consumption, the amount of FAPs deployed is worthy of more considerations. Nevertheless, little existing works present an analytical result regarding the optimal FAP density for a given User Equipment (UE) density. This paper explores the realistic scenario of randomly distributed FAPs in UDN and derives the coverage probability via Stochastic Geometry. From the analytical results, coverage probability is strictly increasing as the FAP-to-UE ratio increases, yet the growing rate of coverage probability decreases as the ratio grows. Therefore, we can consider a specific FAP-to-UE ratio as the point where further increasing the ratio is not cost-effective with regards to the requirements of communication systems. To reach the optimal FAP density, we can deploy FAPs in line with peak traffic and randomly switch off FAPs to keep the optimal ratio during off-peak hours. Furthermore, considering the unbalanced nature of traffic demands in the temporal and spatial domain, dynamically and carefully choosing the locations of active FAPs would provide advantages over randomization. Besides, with a huge FAP density in UDN, we have more potential choices for the locations of active FAPs and this adds to the demand for a strategic sleeping policy.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.6
• /
• pp.50-59
• /
• 2014

This experiment was performed in order to study the relationship between physical properties of soil and the growth characteristics of Sedum reflexum. A correlation analysis and multiple regression analysis were performed using SPSS Ver 19.0 for Windows. The multiple regression analysis results of soil physical properties and growth characteristics were as follows. The regression equation: The length=$.993-14.070^*$(soil bulk density)+$.233^*$(solid phase)+$.038^*$(liquid phase)+$.068^*$(permeability). The significance of soil bulk density and solid phase was great. The width=$2.931-33.925^*$(soil bulk density)+$.566^*$(solid phase)+$.206^*$(liquid phase)+$.027^*$(permeability). The significance of soil bulk density and solid phase was great. The wet weight and dry weight of the upper and lower and soil physical properties did not have a direct relationship.

• Weed & Turfgrass Science
• /
• v.4 no.3
• /
• pp.262-267
• /
• 2015

In order to establish the efficient sod production and soil management, there is a need to perform research on the growing condition of zoysiagrass on soil environments. With an attempt to identify the growth of zoysiagrass and the chemical characteristics of soil according to different growing seasons, this study was carried out in separate areas where zoysiagrass has been grown for 1 year, 10 years, 20 years, and 30 years. As the growing season became longer, bulk density of the soil was increased, porosity and gaseous phase were decreased. The level of pH was highest in the area where zoysiagrass has been produced for 30 years, whereas total nitrogen and organic matters were found to be the greatest in where zoysiagrass has been produced for 1 year. Accordingly, the chemical properties of soil were deteriorated more in the area with continuous cropping than in the area with 1 year of cropping. As the time period of producing zoysiagrass became longer, growth of shoot and root were decreased. In this study, it is required to produce zoysiagrass through soil improvement in areas that have been used for production for over 10 years.

• Journal of Korea Foresty Energy
• /
• v.22 no.1
• /
• pp.8-16
• /
• 2003

The Phyllostachys pubescens planted in the Nambu forest Experiment was used for this study. The growth ages of the P. pubescens were 1, 2 and 3 years, respectively. The experiment was carried out every month in between June of 2001 and May of 2002. The p. pubescens were divided into upper, middle and lower parts according to the growing points. The static modulus of elascity($MOE_d$) and dynamic modulus of elascity($MOE_d$) were investigated for the physical and mechanical properties of the P. pubescens. The density, MOEs and $MOE_d$according to the growing points were highest in the upper part of the P. pubescens. Generally, density and MOEs and $MOE_d$ of the P pubescens for 3 years grows larger every month. However, moisture content, MOEs and $MOE_d$ of the P. pubescens for 1, 2 years had nothing to do with growth ages and felling time. In the case of the relationships between average MOEs and $MOE_d$ the correlation coefficient was 0.88 in between June of 2001 and May of 2002. Also, $MOE_d$ showed about 18.5% higher than MOEs. Generally, the equally expressed in research that was known that $MOE_d$ of wood is higher than MOEs of wood. Therefore, the $MOE_d$ using a resonance frequency mode is useful as a nondestructive evaluation(NDE) method for predicting the MOE of the P. pubescens.

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.1043-1049
• /
• 2016

A total of 16 growing pigs (Landrace${\times}$Yorkshire${\times}$Duroc, average weight $71{\pm}2kg$) were used in this experiment for 24 days to determine the effect of replacing ground corn with barley varieties on growth performance, nutrient digestibility, and blood metabolites. Each pig was housed individually in a metabolic cage with a nipple waterer and feeder. Four dietary treatments included control (a corn and soybean meal-based diet) and 3 barley varieties (Youngyang, Wooho, or Yuyeon barley replacing 40% of ground corn). Growth performance and nutrient digestibility were not affected by replacement of 40% of ground corn with one of the three barley varieties (p > 0.05), but final body weight was. As for blood characteristics, pig treated with all of the barley treatments had no effect (p > 0.05) on total protein, albumin, aspartate aminotransferase (AST), alanine aminotransferase (ALT), lactate dehydrogenase (LD), and glucose in comparison with control; however, there was a difference in high density lipoprotein (HDL)-cholesterol levels between the control and all of the barley replaced treatment groups (p < 0.05). In conclusion, in spite of statistically significant differences, each of the three barley varieties is a suitable substitute for ground corn in the diet of growing and fattening pigs without adverse effects on growth performance, nutrient digestibility, and blood characteristics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.464-470
• /
• 2020

This study was conducted to replace fish meal (FM) with three plant proteins (soybean meal, soy protein concentrate, and wheat gluten) in diets for growing olive flounder Paralichthys olivaceus. The control diet was formulated to contain 65% sardine FM and four other replacement diets were formulated to replace FM with the plant proteins by 25, 30, 35 and 40% (designated FM25, FM30, FM35 and FM40, respectively). The replacement diets were added with three essential amino acids (lysine, methionine and threonine) to meet their requirements for the fish. Olive flounder (initial average weight, 96.8±0.2 g) were randomly distributed into 20 tanks (425 L each) at a density of 25 fish per tank. Four replicate groups of fish were fed one of the diets two times daily for 15 weeks. At the end of the feeding trial, no significant differences were found among all the fish groups in growth performance, feed utilization, nonspecific immune responses and hematological health parameters. Thus, this result indicates that the plant proteins with the three limiting amino acids could replace FM up to 40% in diets for growing olive flounder.

• Corrosion Science and Technology
• /
• v.6 no.3
• /
• pp.103-111
• /
• 2007

The effect of stress factors on the growing process of stress corrosion cracking (SCC) of the sensitized 18-8 stainless steel in high temperature water was investigated using equations of crack growth rate derived from applying electric circuits to SCC corrosion paths. Three kinds of cross sections have to be considered when electric circuit is constructed using total current. The first is ion flow passage area, $S_{sol}$, of solution in crack, the second is total dissolving surface area, $S_{dis}$, of metal on electrode of crack tip and the third is dissolving cross section, $S_{met}$, of metal on grain boundary or in base metal or in welding metal. Stress may affect each area. $S_{sol}$ may depend on applied stress, $\sigma_{\infty}$, related with crack depth. $S_{dis}$ is expressed using a factor of $\varepsilon(K)$ and may depend on stress intensity factor, K only. SCC crack growth rate is ordinarily estimated using a variable of K only as stress factor. However it may be expected that SCC crack growth rate depends on both applied stress $\sigma_{\infty}$ and K or both crack depth and K from this consideration.$\varepsilon(K)$ is expressed as ${\varepsilon}(K)=h_2{\cdot}K^2+h_3{\cdot}K^3$ when $h_{2}$ and $h_{3}$ are coefficients. Also, relationships between SCC crack growth rate, da/dt and K were simulated and compared with the literature data of JBWR-VIP-04, NRC NUREG-0313 Rev.2 and SKIFS Draft. It was pointed out in CT test that the difference of distance between a point of application of force and the end of starter notch (starting point of fatigue crack) may be important to estimate SCC crack growth rate. An anode dissolution current density was quantitatively evaluated using a derived equation.

• Fire Science and Engineering
• /
• v.21 no.4
• /
• pp.52-58
• /
• 2007

The effect of stand-growing-stock characteristics of thinning area and non-thinning area on forest fire was studied in this work. 14 spots were selected from 3 counties such as Yangyang, Injae, and Gapyeong and on-the-spot investigations were performed to evaluate the effect of forest fire. The stand-growing-stock characteristics on the spots were analyzed through the height of tree, breast height diameter, clear length, mortality of branch, forest tree standing crop density, degree of closure, and shrub and grass cover degree. The relation between forest fire and the risk of spread of forest fire were analyzed from the analysis of the stand-growing-stock characteristics. It is considered from this work that the possibility of forest fire is decreased on the thinning area compared to the non-thinning area because of higher clearlength, lower number of tree, lower mortality of branch and higher shrub and grass cover degree.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.4
• /
• pp.433-442
• /
• 2010

BER at different packing ratios of bio-ring media(BRM) was tested to investigate the effect of varying hydraulic retention time (HRT) and current density on the nitrate removal and current efficiency. In the preliminary batch mode experiment of BERs, current density was applied at 2.0 A/$m^2$, 4.0 A/$m^2$, 4.8 A/$m^2$, which correspond to the designation of reactor #1, #2, #3, respectively. The reactor #2 showed a highest nitrate removal rate of 162.0 mg $NO_3{^-}$-N/L/d, and the kinetics of nitrate removal rate was defined as the Zero order reaction. In the primary experiment of BERs, four BERs packed with BRM were operated in varying HRT and current, and the packing ratios of reactor #1, #2, #3 and #4 were 0%, 8%, 16%, 24%. respectively. This results of the experiments indicated that the nitrate removal rate and current efficiency were increased significantly cause of growing of autotrophic denitrification microorganisms on the surface of cathode and media by increasing of the current density and decreasing of HRT. However, The decreasing of nitrate removal rate and current efficiencies were observed in the condition of HRT of 5.25 hr and 4.8 A/$m^2$ of current density. With more increasing current density and decreasing of HRT, the hydrogen inhibition occurred at the surface of cathode. Moreover, nitrate removal rate by autotrophic denitrification microorganisms attached on the media surface was observed to be limited by no longer increasing dissolved hydrogen concentration of each reactor. In conclusion, the highest nitrate nitrogen removal and current efficiency could be achieved when the BER was operated at the conditions of 7 hr HRT, current density of 4.0 A/$m^2$, and 16% packing ratio. And it was found that the amount of nitrate removal by microorganisms attached on the surface of cathode and media (BRM) was 178.2 mg/L and 52.2 mg/L respectively. and the amount of nitrate removal per MLVSS was 0.435 g $NO_3{^-}$-N/g $MLVSS{\cdot}d$ and 0.336 $NO_3{^-}$-N/g $MLVSS{\cdot}d$.

• Journal of the Korean Child Neurology Society
• /
• v.26 no.4
• /
• pp.269-271
• /
• 2018

Purpose: The use of anticonvulsants can cause side effects such as reduction of bone mineral density, requiring attention in growing children. The aim of our study is to investigate the effects of different anticonvulsants on bone mineral density in epileptic patients treated with monotherapy. Methods: We retrospectively reviewed medical records of 60 subjects who visited the Pediatric Epilepsy Clinic of Bucheon St. Mary's Hospital from January 2013 to December 2017. Bone mineral density was measured with dual photon absorptiometry every 6 months. Results: The number of patients treated with oxcarbazepine, valproate and levetiracetam was 31, 16 and 13, respectively. Reduction of bone mineral density was seen in 8 out of 31 patients (25.8%, P=0.10) treated with oxcarbazepine, 9 out of 16 patients treated with valproate (56.3%, P=0.04) and 4 out of 13 patients treated with levetiracetam (30.8%, P=0.50). Conclusion: There was a significant reduction of bone mineral density in patients treated with valproate compared to the other anticonvulsants in our study. We believe attention to bone mineral density is required in children treated with anticonvulsants.