• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.73-79
• /
• 2008

Display's life time is defined as the time of 50% luminance drop. It was used luminance and temperature as accelerated factor to accelerated lifetime at test. When it's working jule-heat is generated and device's temperature is growing as any temperature because OLED is self-luminance display device. So we decided temperature condition is 25, $70^{\circ}C$, and luminance condition is $60{\sim}300cd/m^2$ in test. It's assumed accelerated lifetime model by result of the test.

• Journal of the Korean Institute of Educational Facilities
• /
• v.14 no.1
• /
• pp.52-57
• /
• 2007

Kindergarten children are engaged in the age of physical immaturity as well as the rapid growth. The indoor air contaminants that are proved to affect even the full grown adults are obvious to have no little influence to immature small children in a growth period. In May 2004, for the multi purpose facilities and newly constructed apartments, the Ministry of Environment announced "Indoor Air Quality Control Law for the Multi Purpose Facility," which made the interests to be focused in the urgent understanding of current condition and preparation of measures about the indoor air pollution. In Dec 2005, the law was revised to obligatorily notify the amount of Formaldehyde and Volatile Organic Compounds in the case of newly constructed apartments with more than 100 houses. However, since the kindergarten takes none of the classifications, even the current condition is not grasped although it is directly connected to the health of growing children. Therefore, the study aims to analyze indoor air pollution of one selected kindergarten in Incheon city.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.736-741
• /
• 2004

In high-capacity disk drives with ever-growing track density, the allowable level of position error signal (PES) is becoming smaller and smaller. In order to achieve the high TPI disk drive, it is necessary to improve the writing accuracy during the STW(servo track writing) process through the reduction of TMR sources. Among the main contributors of the NRRO(Non-Repeatable Run-out) PES, the disk vibration and the HSA(head-stack assembly) vibration is considered to be one of the most significant factors. Also the most contributors of RRO(Repeatable Run- out) come from the contributors of NRRO which is written-in at the time of STW(servo track writing) process. In this paper, the experimental test result shows that the effect of NRRO on servo written-in RRO effectively can be reduced through a STW process under low dense medium condition such as semi-vacuum.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.3 no.4
• /
• pp.56-62
• /
• 2004

Using NC or CNC machine tool, the unmanned automatic production system has been growing recently in the manufacturing field. Thus it is important to find out the machinability of cutting force, tool wear and surface roughness during the cutting process. It is necessary to find how to estimate the machinability for the effective cutting condition because of problem about cutting power, tool wear, cutting time and precision. This study was planned to discover the relations of tool wear by variations of roughness and derived to correlate the wear with the surface roughness on the cutting parameter(cutting force, flank wear, surface roughness, friction angle, shear angle, slenderness ratio) when the aluminum alloy was cut in turning.

• Proceedings of the Safety Management and Science Conference
• /
• 2007.04a
• /
• pp.133-141
• /
• 2007

Aerial working platform is recently used broadly in heavy industry and construction field and also the utilization of it is growing. However, the raise of critical incident caused by unskilled operator is increasing gradually. To reduce and prevent such incident, the training for operating is essential. It's not easy to cover the requirements for the training with real platform because of the high price of it, safety and weather condition. This paper proposes a simulator for the training based on virtual reality to give the training safely regardless to the weather condition and the simulator is deliverable in lower price than real one. The simulator proposed in this paper is available to be set according to the level of trainee managing the assessment level and be also applied for the design of general heavy equipment training simulator based.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.57-62
• /
• 2007

Aerial working platform is recently used broadly in heavy industry and construction field and also the utilization of it is growing. However, the raise of critical incident caused by unskilled operator is increased gradually. To reduce and prevent such incident, the training for operating is essential. It's not easy to cover the requirements for the training with real platform because of the high price of it, safety and weather condition. This paper proposes a simulator for the training based on virtual reality to give the training safely regardless to the weather condition and the simulator is deliverable in lower price than real one. The simulator proposed in this paper is available to be set according to the level of trainee's skill managing and be also applied for the design of general heavy equipment training simulator.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1033-1035
• /
• 2003

This study attempts to analyze the potential of global scale NDVI data archive to monitor regional scale droughts. Ten-days maximum value NDVI composite data of the northeast Asia region were acquired for the growing seasons from 1993 to 2003. Two NDVI-derived drought indices (SVI, VCI), reported from previous studies, were applied to the study area. Although the SVI and VCI are mainly developed for monitoring the drought condition at the agriculture crop and grasslands, it turned out that they were also effective to reveal the drought condition over the temperate mixed forest. The drought symptom lasts at least one or two months even after the normal raining begins.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.317-330
• /
• 1999

The texture of electrodeposits changes from the orientation that places the lowest energy crystal facets parallel to the substrate under a condition of low ion concentration adjacent to the deposit, to the orientation that places the higher energy crystal facets parallel to the substrate as the ion concentration adjacent to the deposit increases. The electrodeposits have peculiar surface morphologies and microstructures depending on their textures, which in turn may affect their mechanical properties even when they are obtained in a similar electrolysis condition. The electrodeposits undergo recrystallization, when annealed. The recrystallization texture may be different from the deposition texture. These phenomena have been discussed.

• Journal of the Society of Naval Architects of Korea
• /
• v.41 no.3
• /
• pp.35-40
• /
• 2004

Since the scale of vessels is growing up recently, some troubles between the shaft and after bush bearing are frequently reported. Generally, mean pressure on bush bearing is used as a design criterion. However, in some case of the long bearing such as after bush bearing of the propulsion shaft, it might be liable to be locally under high pressure. As for the main engine bearings and the intermediate shaft bearing, it is reasonable to take the mean pressure as a design criterion. But, in case of after bush bearing, it is not sufficient because of the possibility of high pressure caused by local contact. In this study, Hertzian contact condition was applied to evaluation of the local pressure for after bush bearing. To reduce the local maximum pressure, the height of the after bush bearing was controlled. It was found that local maximum pressure could be reduced effectively by taking a partial slope on the white metal of the aft bush bearing.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.233-243
• /
• 2011

This experiment was conducted to investigate the effect of future climate change on growing period and temperature in different rice maturity types as global warming progressed, where Odaebyeo, Hwaseongbyeo, Ilpumbyeo were used as a representative cultivar of early, medium, and medium-late rice maturity type, respectively, and A1B scenario was applied to weather data for future climate change at 57 sites in Korea. When cropping season was not adjusted to climate change, entire growing period and growing temperature were shorten and risen, respectively, as global warming progressed. On the other side, when cropping season was adjusted to climate change, growing period and temperature after heading date were not changed in contrast to growing period and growing temperature before heading which were more seriously shortened and risen as global warming progressed than in not adjusted cropping season. It is supposed that adjusting cropping season to climate change can alleviate rice yield reduction and quality deterioration to some degree by improving growing temperature condition during grain-filling period, but also still have a limit such as seriously shortened growing period indicating that there need to develope actively new rice cultivation methods and varieties for future climate change.