• Journal of Satellite, Information and Communications
• /
• v.4 no.1
• /
• pp.28-35
• /
• 2009

We investigate the adaptive channel attenuation compensation of satellite OFDMA downlink users for minimum PAR (Peak to Average power Ratio), which is one of the main challenging issues in satellite OFDMA application. First, we analyze and compare PAR performances of two main different channel attenuation compensation schemes for OFDMA, i.e., PC-OFDMA (power control OFDMA) and AMC-OFDMA (Adaptive Modulation and Coding). While AMC-OFDMA maintains the constant transmission powers through entire user data subcarriers, PC-OFDMA has non-uniform subcarrier transmission powers because subcarrier powers are separately controlled to compensate each user's sub-channel attenuation. We newly found the fact that non-uniform subcarrier power in PC-OFDMA achieves rather reduced PAR compared to AMC-OFDMA and the amount of reduction becomes larger as the power differences among subcarriers increase. Also, there is an additional PAR reduction in PC-OFDMA by optimizing subcarrier grouping scheme for user's sub-channelization.

• Architectural research
• /
• v.22 no.2
• /
• pp.41-52
• /
• 2020

Laboratory buildings with specialized equipment and ventilation systems pose challenges in terms of efficient energy use and initial construction costs. Additionally, lab spaces should have flexible and efficient layouts and provide a comfortable indoor research environment. Therefore, this study aims to identify the correlation between the facade of a building and its interior layout from case studies of energy-efficient research labs and to propose passive energy design strategies for the establishment of an optimal research environment. The case studies in this paper were selected from the American Institute of Architects Committee on the Environment Top Ten Projects and Leadership in Energy and Environmental Design (LEED) certified research lab projects. In this paper, the passive design strategies of space zoning, façade design devices to control heating and cooling loads were analyzed. Additionally, the relationships between these strategies and the interior lab layouts, lab support spaces, offices, and circulation areas were examined. The following four conclusions were drawn from the analysis of various cases: 1) space zoning for grouping areas with similar energy requirements is performed to concentrate similar heating and cooling demands to simplify the HVAC loads. 2) Public areas such as corridor, atrium, or courtyard can serve as buffer zones that employ passive solar design to minimize the mechanical energy load. 3) A balanced window-to-wall ratio (WWR), exterior shading devices, and natural ventilation systems are applied according to the space programming energy requirements to minimize the dependence on mechanical service. 4) Lastly, typical laboratory space zoning categories can be revised, reversed, and even reconfigured to minimize the energy load and adjust to the site context. This study can provide deep insights into various design strategies employed for construction of green laboratories along with intuitive arrangement of various building components such as laboratory spaces, lab support spaces, office spaces, and common public areas. The key findings of this study can contribute towards creating improved designs of laboratory facilities with reduced carbon footprint and greenhouse emissions.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.31-43
• /
• 2013

Although the vector map data possesses much higher values than other types of multimedia, the data copyright and the protection against illegal duplication are still far away from the attention. This paper proposes a novel watermarking technique which is both robust to diverse attacks and optimized to a vector map structure. Six approaches are proposed for the design of the watermarking algorithm: point-based approach, building a minimum perimeter triangle, watermark embedding in the length ratio, referencing to the pixel position of the watermark image, grouping, and using the one-way function. Our method preserves the characteristics of watermarking such as embedding effectiveness, fidelity, and false positive rate, while maintaining robustness to all types of attack except a noise attack. Furthermore, our method is a blind scheme in which robustness is independent of the map data. Finally, our method provides a solution to the challenging issue of degraded robustness under severe simplification attacks.

• Journal of Korean Public Health Nursing
• /
• v.18 no.2
• /
• pp.299-311
• /
• 2004

Purpose: Somatotype drawing developed by Sorensen et al.(1983) has been evaluated as a simple instrument of obesity level without real somatic measuring as height and weight. This study was designed to validate somatotype drawings for obesity assessment by bioelectrical impedance body component analysis. Method: At first questionnaire of somatotype drawing was done. Subjects were measured body component by bioelectrical impedance analysis as weight, BMI(body mass index), WHR(waist-hip ratio), body water, protein mass, mineral mass, body fat mass, skeletal muscle mass, soft lean mass, fat free mass and percent body fat. We evaluated correlations between these data and somatotype drawings and tried to grouping of somatotype drawings with the means of major body component value. Result: The data were collected from 205 college women whose height and weight were $161.2\pm4.8,\;55\pm8.3$. Spearman's correlation coefficients of somatotype drawing were 0.74 with BMI, 0.68 with weight 0.69 with body fat mass, 0.65 with WHR. 0.64 with percent body fat after adiusted age. The grade of somatotype drawings were grouped as 1-2, 3-4, 5-6. 7-9 by BMI, body fat mass, weight, 1, 2-4, 5-6, 7-9 by WHR and 1-2, 3-4, 5-9 by percent body fat(ANOVA and Duncan's method). Conclusion: So quick instrument using somatotype drawings were useful tools for evaluation of obesity level and is applicable to screen degree of body fat in self-administered questionnaire survey.

• Journal of KIISE:Databases
• /
• v.35 no.4
• /
• pp.319-332
• /
• 2008

Data cube, which is multi-dimensional data model, have been successfully applied in many cases of multi-dimensional data analysis, and is still being researched to be applied in data stream analysis. Data stream is being generated in real-time, incessant, immense, and volatile manner. The distribution characteristics of data arc changing rapidly due to those characteristics, so the primary rule of handling data stream is to check once and dispose it. For those characteristics, users are more interested in high support attribute values observed rather than the entire attribute values over data streams. This paper propose dynamic data cube for applying data cube to data stream environment. Dynamic data cube specify user's interested area by the support ratio of attribute value, and dynamically manage the attribute values by grouping each other. By doing this it reduce the memory usage and process time. And it can efficiently shows or emphasize user's interested area by increasing the granularity for attributes that have higher support. We perform experiments to verify how efficiently dynamic data cube works in limited memory usage.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1200-1209
• /
• 2011

In this paper, we propose a novel energy efficient MAC protocol which is based on orthogonal frequency division multiple access (OFDMA) and exploits the physical characteristic that propagation loss of acoustic wave depends on the distance. In the proposed scheme, sensor nodes are grouped according to the distance to sink node. Then, each group uses a different frequency band. The proposed scheme not only enables all sensor nodes to maintain the signal-to-noise ratio above a certain required level (Accepted Minimum SNR, AMS), but also reduces overall transmission power consumption. In addition, the dynamic sub-channel allocation is employed in order to improve data transmission rate. Simulations show that proposed MAC protocol has better performance in a delay-tolerant underwater acoustic sensor networks.

• Economic and Environmental Geology
• /
• v.21 no.3
• /
• pp.223-234
• /
• 1988

A large number of gold and/or silver-bearing quartz veins occur in or near Mesozoic granite batholith elongated in a NE-SW direction within the Chungcheong Province. Precambrian schists and gneisses, and Jurassic and Cretaceous granitic rocks serve as hosts for gold and/or silver deposits. On the basis of Ag/Au total production and ore grade ratio, 15 mines may be divided into three major groups: gold-dominant deposits, gold-silver deposits, and silver-dominant deposits. The chemical composition of electrum from skarn deposit (Geodo mine), alaskite-type deposit (Geumjeong mine) and 15 vein deposits was summarized. It was found that the Au content of electrum for vein deposits ranging from 5.2 to 86.5 is lower than that for skarn and alaskite deposits. Among 15 vein deposits, the composition of electrum associated with pyrrhotite is relatively high and has a narrow range of 40.8 to 86.5 atomic % Au, but the Au content of electrum with pyrite is in range of 5.2 to 82.8 atomic %, and is clearly lower than that with pyrrhotite. The grouping of ages for these mines indicates that gold and/or silver mineralizations occurred during two periods in the Mesozoic. Daebo igneous activities are restricted to gold mineralization in the range of 158 to 133 Ma, whereas Bulgugsa igneous activities are related to gold and/or silver mineralization ranging from 108 to 71 Ma. Generally speaking, Jurassic gold-dominant veins have many common characteristics; notably prominent association with pegmatites, simply massive vein morphology, high fineness in the ore concentrates, rarity of silver minerals, and a distinctively simple mineralogy, including sphalerite, galena, chalcopyrite, pyrrhotite and/or pyrite. Although individual deposits exhibit widely differing diversity, Cretaceous gold-silver and silver-dominant veins are characterized by features such as complex vein, low to medium fineness in the ore concentrates and abundance of silver minerals including Ag sulfosalts, Ag sulfides, Ag tellurides and native silver.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1621-1630
• /
• 2009

There is a lot of recent research to provide services of dynamic distributed contents in P2P-based distributed environment. Distributed services of contents objects, however, have problems in QoS and dynamic management of segments. This paper proposed a new segment management method for the service of P2P-based distributed contents. The proposed method manages groups by the SGM(Segment Group Manager). The SGM manages streaming efficiently by the grouping of segments to be served in P2P environment. The segments in the same group cooperate for improved QoS using the management structure based on the distance and relationship. The distance-based management structure is for the improvement of retrieval efficiency while the relationship-based management structure is for the improvement of service ratio. The simulation results of the proposed method showed improvements in average transmission efficiency and average service rate. The improvement is 8% - 30% in average transmission efficiency and 10% - 30% in average service rate.

• Clinical and Experimental Reproductive Medicine
• /
• v.44 no.3
• /
• pp.119-125
• /
• 2017

Objective: In vitro culture of preimplantation embryos is improved by grouping embryos together in a drop of media. Individually cultured embryos are deprived of paracrine factors; with this in mind, we investigated whether the addition of a single embryo-secreted factor, interleukin-6 (IL-6), could improve the development of individually cultured embryos. Methods: Mouse embryos were cultured individually in $2{\mu}L$ of G1/G2 media in 5% oxygen and supplemented with a range of doses of recombinant mouse or human IL-6. Results: Mouse IL-6 increased hatching at doses of 0.01 and 10 ng/mL compared to the control (93% and 93% vs. 78%, p< 0.05) and increased the total number of cells at a dose of 0.1 ng/mL compared to the control ($101.95{\pm}3.36$ vs. $91.31{\pm}3.33$, p< 0.05). In contrast, the highest dose of 100 ng/mL reduced the total number of cells ($79.86{\pm}3.29$, p< 0.05). Supplementation with human IL-6 had a different effect, with no change in hatching or total cell numbers, but an increase in the percentage of inner cell mass per embryo at doses of 0.1, 1, and 100 ng/mL compared to the control ($22.9%{\pm}1.1%$, $23.3%{\pm}1.1%$, and $23.1%{\pm}1.1%$ vs. $19.5%{\pm}1.0%$, p< 0.05). Conclusion: These data show that IL-6 improved mouse embryo development when cultured individually in complex media; however, an excess of IL-6 may be detrimental. Additionally, these data indicate that there is some cross-species benefit of human IL-6 for mouse embryos, but possibly through a different mechanism than for mouse IL-6.

• Smart Media Journal
• /
• v.10 no.2
• /
• pp.70-75
• /
• 2021

Grouping and classifying similar designs in design increase efficiency in terms of management and provide convenience in terms of use. Using artificial intelligence algorithms, this study attempted to classify textile designs into four categories: dots, flower patterns, stripes, and geometry. In particular, we explored whether it is possible to find and explain the regions of interest underlying classification from the perspective of artificial intelligence. We randomly extracted a total of 4,536 designs at a ratio of 8:2, comprising 3,629 for training and 907 for testing. The models used in the classification were VGG-16 and ResNet-34, both of which showed excellent classification performance with precision on flower pattern designs of 0.79%, 0.89% and recall of 0.95% and 0.38%. Analysis using the Local Interpretable Model-agnostic Explanation (LIME) technique has shown that geometry and flower-patterned designs derived shapes and petals from the region of interest on which classification was based.