• 제목/요약/키워드: group of pile

검색결과 245건 처리시간 0.044초

지중응력의 변화를 고려한 조립토 다짐말뚝의 극한지지력 평가 (Evaluation of Ultimate Bearing Capacity on Granular Compaction Pile Considering Various Stresses in a Ground)

  • Kang, Yun;Yun, Ji-Yeon;Chang, Weon-Ho;Kim, Hong-Taek
    • 한국지반공학회논문집
    • /
    • 제20권2호
    • /
    • pp.115-124
    • /
    • 2004
  • 조립토 다짐말뚝(granular compaction pile)공법은 비교적 강성이 크고 압축성이 작은 자갈, 쇄석 및 모래 등의 조립질 재료를 사용하여 연약한 지반에 말뚝을 조성하는 공법으로, 기초지반의 지지력 증가, 침하량 감소 및 압밀배수 촉진 등에 의한 지반개량 효과 뿐만 아니라, 사질토 지반에 적용시 지진에 의한 액상화 방지효과도 큰 공법으로 알려져 있으나 국내에서는 아직까지 널리 사용되지 않고 있다. 일반적으로 조립토 다짐말뚝은 Piled-raft system으로 시공되므로, 이 때 조립토 다짐말뚝의 극한지지력에 대한 평가는 팽창파괴 중심부의 깊이에 따라 달라지게 된다. 또한 조립토 다짐말뚝과 주변지반과의 하중분담에 대한 영향 및 지반내에서 조립토 다짐말뚝에 작용하는 구속응력의 변화를 적절하게 고려하여 조립토 다짐말뚝의 극한지지력이 결정되어야 한다. 본 연구에서는, 김 등(1998)에 의하여 연구되었면 조립토 다짐말뚝의 극한지지력 평가에 대한 해석기법을 토대로, 단일 말뚝에 대하여 상재하중의 크기, 재하면적의 크기 및 파괴깊이에 따른 수평구속응력의 변화를 고려하여 극한지지력을산정하기 위한 기법을 부시네스크 식을 이용하여 제안하였다. 또한 제안된 조립토 다짐말뚝의 극한지지력 평가 기법의 타당성을 실내모형 실험 및 수치해석 프로그램인 PFC-2D 프로그램을 이용한 수치해석 결과와의 비교, 분석을 통해 검증하였다.

병렬 U형 현장타설 에너지파일의 열교환 효율 및 적용성 평가 (Evaluation of Heat Exchange Efficiency and Applicability for Parallel U-type Cast-in-place Energy Pile)

  • 박상우;김병연;성치훈;최항석
    • 대한토목학회논문집
    • /
    • 제35권2호
    • /
    • pp.361-375
    • /
    • 2015
  • 에너지파일은 기존의 수직밀폐형 지중열교환기를 경제적으로 대체할 수 있는 새로운 형태의 지중열교환기이다. 즉, 에너지파일은 건물의 기초 구조물과 지중열교환기의 역할을 동시에 수행하는 에너지 구조체로서, 말뚝 기초 내부에 열교환 파이프를 삽입하고 파이프를 통해 유체를 순환시켜 지반과의 열교환을 유도한다. 본 연구에서는 병렬 U형(5쌍, 8쌍, 10쌍)의 열교환 파이프를 대구경 현장타설 에너지파일에 삽입하여, 3본의 에너지파일을 실규모로 시공하였다. 또한 현장 열응답 시험(In-situ thermal response tests, TRTs)을 수행하고 시공된 현장타설 에너지파일과의 열교환 효율을 비교하기 위하여 30m 깊이의 수직밀폐형 지중열교환기를 별도로 시공하였다. 병렬 U형 현장타설 에너지파일에 대해서는 냉난방 부하를 인공적으로 주입하는 열교환 성능 평가시험을 수행하여 열교환 성능(heat exchange rate)을 평가하였다. 마지막으로 현장타설 에너지파일의 적용성 평가를 위해 산정된 상대 열교환 효율(relative heat exchange efficiency) 및 열교환 성능을 선행 연구 결과와 비교하였으며, 본 연구에서 시공된 현장타설 에너지파일은 안정적이고 효율적인 열성능을 보이는 것으로 나타났다.

소비자 체험조사를 통한 타월 만족도 분석 연구 (Towel Experience and Consumer Satisfaction)

  • 송경헌;허미옥
    • 한국생활과학회지
    • /
    • 제19권6호
    • /
    • pp.1063-1070
    • /
    • 2010
  • This study examined 12 types of towels with differing fabric material, function, quality, printing, pile length, twist, etc. from a towel company which manufactures and distributes products domestically. After 3 months of use by consumers, a consumer satisfaction survey was administered and results analyzed. Four types of towels were assigned to each group and the towels were used every day for 3 months. Participant feelings after using the towel for the first time and after using it for three months were investigated. The questionnaire consisted of 26 questions on a 5-point Licket-type scale. The first 13 questions measured perceptions of absorption, touch, fine fiber loss, contamination, deformation, drying speed, and design. Other questions compared differences between the two towel types in terms of their material, function, quality, printing, pile length, and degree of twisting. Results showed that, with regards to weight, consumers preferred towels between 130~150g and a thickness of around 1.7~1.8mm. The bamboo towel was considered superior to the cotton towel in terms of sense of touch and did not happen linter after washing. The antibacterial towel was considered better than the cotton towel in terms of absorption but in terms of contamination, participants felt the antibacterial towel became dirty more easily than the cotton towel. We thought that it might be influence of the color of towel. Low-quality towels became stiffer and misshapen more easily than higher-quality towels. But the study showed that the consumers did not perceive significant differences in the towels' quality. Printed towels became thinner and their color changed more with washing. The consumers preferred the design of jacquard towels to printed towels. Towels with short piles was happened more linter than the towel with long pile after washing. Non-twisted towel were better than the highly-twisted towel in terms of sense of touch and absorption but the non-twisted towel happened more linter after washing and became dirty more easily.

A novel preloading method for foundation underpinning for the remodeling of an existing building

  • Wang, Chengcan;Han, Jin-Tae;Kim, Seokjung;Jang, Young-Eun
    • Geomechanics and Engineering
    • /
    • 제24권1호
    • /
    • pp.29-42
    • /
    • 2021
  • The utilization of buildings can be improved by extending them vertically. However, the added load of the extension might require building foundations to be underpinned; otherwise, the loads on the foundations might exceed their bearing capacity. In this study, a preloading method was presented aiming at transferring partial loads from existing piles to underpinning piles. A pneumatic-type model preloading device was developed and used to carry out centrifuge experiments to evaluate the load-displacement behavior of piles, the pile-soil interaction during preloading, and the additional loading caused by vertical extension. The results showed that the preloading devices effectively transfer load from existing piles to underpinning piles. In the additional loading test of group piles, the load-sharing ratio of a pile increased with its stiffness. The load-sharing ratio of a preloaded micropile was less than that of a non-preloaded micropile as a result of the reduction in axial stiffness caused by preloading before additional loading. Therefore, a slight reduction of the load-sharing capacity of an underpinning pile should be considered if the preloading method is applied. Further, two full scale preloading devices was developed. The devices preload underpinning piles and thereby produce reaction forces on a reaction frame to jack existing piles upward, thus transferring load from the existing piles to the underpinning piles. Specifically, screw-type and hydraulic-jack type devices were developed for the practical application of foundation underpinning during vertical extension, and their operability and load transfer effect verified via full-scale structural experiments.

계류돌핀의 말뚝형 하부구조에 대한 실용적 설계 최적화 과정 (A Practical Procedure for the Design Optimization of Pile-type Substructure in a Mooring Dolphin)

  • Ryu, Yeon-Sun;Lee, Nary;Kim, Jeong-Tae;Cho, Hyun-Ma
    • 한국전산구조공학회논문집
    • /
    • 제13권3호
    • /
    • pp.285-294
    • /
    • 2000
  • 계류돌핀의 강관말뚝식 하부구조에 대한 실용적 설계최적화 과정을 제시하고, 수치 예를 통하여 유용성을 평가하였다. 유한차원 최적설계 문제의 정식화에서, 말뚝들을 몇 개의 그룹으로 구분하여 이들의 기하학적 위상과 단면의 치수를 설계변수로 활용하였다. 설계목적함수는 말뚝의 총 중량이며, 설계제약조건은 응력과 근입 깊이, 설계변수의 상한과 하한 등이다. 설계변수의 연계와 고정을 통해 몇 가지의 실용적 설계 대안을 검토하였다. 최적화 프로그램으로는, 순차2차계획법(SQP)을 사용하고 또 쉽게 얻을 수 있는 PLBA 및 IMSL 라이브러리의 DNCONF서브루틴을 이용하였다. 수치예제의 돌핀은 20개의 강관말뚝으로 하부구조를 형성하며, 이중 4개는 연직말뚝이고 16개는 경사말뚝이다. 다양한 대안 설계에서 성공적으로 최적해를 얻었으며, 실용적인 최적 설계과정 임을 확인할 수 있었다.

  • PDF

모형챔버시험을 이용한 점성토 지반에 설치된 경량포장체용 기초의 하중전달 특성 (An Analysis of Pile Foundation Load Transfer for Lightweight Pavement System in Clay Soil using Lab Chamber Test)

  • 이관호;신광호
    • 대한토목학회논문집
    • /
    • 제36권3호
    • /
    • pp.545-550
    • /
    • 2016
  • 본 연구에서는 말뚝기초의 실내모형시험을 통해 연약지반상의 경량포장체용 기초로서의 적합성을 분석 및 평가를 목적으로 하고 있다. 안전성 평가를 위해 실내모형시험용 경량포장체용 말뚝기초모형을 실제 포장체 사이즈의 1/30으로 축소한 모형을 이용하여 시험을 실시하였다. 지반 조건은 연약지반을 모사하여 모델링하였고, 말뚝은 마찰군말뚝으로 실험하였다. 제한된 실험으로부터 측정된 모형포장체의 침하량은 Case A는 0.86 mm, Case B는 0.70 mm, Case C는 0.50 mm로 측정되었다. 측정된 말뚝기초 모형의 실험값을 실제 크기로 환산하였을 때의 최대침하량과 부등침하량은 각각 25.8 mm와 10.8 mm로 도로교 설계기준에 의거하여 최대부등변위량인 50 mm와 부등변위량 20 mm를 넘지 않는 것으로 보이며 침하량을 기준으로 안전성을 평가 할 경우 안전한 것으로 판정되었다.

연약지반에 적용된 변단면 연약지반보강기초의 거동분석 (Behavior of Variable Cross-Section Soft Ground Reinforced Foundation in Soft Grounds)

  • 김기웅;김동욱;조명수
    • 한국지반신소재학회논문집
    • /
    • 제15권4호
    • /
    • pp.89-96
    • /
    • 2016
  • 인천 ${\bigcirc}{\bigcirc}$지역의 연약지반에 시공된 변단면 연약지반보강기초(Variable cross-section soft ground reinforced foundation)의 연직압축거동을 분석하였다. 변단면 연약지반보강기초는 원지반과 고화재를 혼합교반하여 형성되는 고형체의 높은 강성과 강도를 이용하여 상부구조물로부터 유발되는 연약하중을 효과적으로 저항하기 위하여 시공된다. 변단면 연약지반보강기초는 군말뚝 형식으로 시공이 되는데, 정확한 연직거동을 알기 위하여 1개소의 기초에 대한 연직재하시험을 수행하였다. 변단면 연약지반보강기초의 거동을 일반적인 깊은 기초의 거동과 비교하기 위하여 유사한 천층지반조건에 시공된 PHC 파일의 재하시험 결과와 비교하여 재하하중에 따른 침하량 및 하중전이 거동특성을 분석하였다. 연직재하시험결과를 비교분석하였다. 변단면 연약지반보강기초는 제한된 범위의 연직하중에 대하여 천층에서도 효율적으로 저항하는 것으로 분석되었다.

연약지반 변형해석을 위한 다목적 Program개발

  • 박병기;정진섭
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
    • /
    • pp.362-375
    • /
    • 1991
  • Background and Necessity of the study : For more than 20 years, the soil engineering reserach group of Chonnam National University has been performing the deformation analysis of soft clayey foundation, since the University is located near the south-western coast of Korean Peninsulla, along which tide reclamation works have been under proaressing. Associsted with the fact mentioned above, the researchers have been developing a computer program in order to carry out deformation analysis of soft foundation since early 1980. Case-studies : In this research, the Biot's equation was selected as the governing equation coupled with several constitutive models including original and modified Cam-clay models, elasto-viscoplastic model, Lade's model etc. The anisotropy of soi1 can be considered in this program. To validate the accuracy of the computer program developed a couple of case-studies were performed. These include the pilot banking, sand drain considering smear effect and compound foundation reinforced with sheet pile into soft foundation.i) The pilot banking Good results could be acquired by assuming banking load as the body force composed of finite element mesh rather than equivalent concentrated load.ii) The sand drain Due to smear, the delay of consolidation was remarkable at the early stsge. so safety for the failure of foundation should be checked for the initial step of consolidation. iii) The compound foundation Accurate results were obtained by introducing the joint element method for the soft foundation reinforced with sheet pile into soiㅣ.

  • PDF

지반-기초-구조물 상호작용을 고려한 말뚝 기초 구조물에서의 지진 하중 평가 (Evaluation of Seismic Loading of Pile Foundation Structure Considering Soil-foundation-structure Interaction)

  • 유민택;하정곤;조성배;김동수
    • 한국지진공학회논문집
    • /
    • 제18권3호
    • /
    • pp.125-132
    • /
    • 2014
  • In this study, a series of dynamic centrifuge tests were performed for a soil-foundation-structural interaction system in dry sand with various embedded depths and superstructure conditions. Sinusoidal wave, sweep wave and real earthquake were used as input motion with various input acceleration and frequencies. Based on the results, a natural period and an earthquake load for soil-structure interaction system were evaluated by comparing the free-field and foundation accelerations. The natural period of free field is longer than that of the soil-foundation-structure system. In addition, it is confirmed that the earthquake load for soil-foundation-structure system is smaller than that of free-field in short period region. In contrast, the earthquake load for soil-foundation-structure interaction system is larger than that of free-field in long period region. Therefore, the current seismic design method, applying seismic loading of free-field to foundation, could overly underestimate seismic load and cause unsafe design for long period structures, such as high-rise buildings.

Readjusting 기법을 적용한 인공신경망의 모형말뚝 수평변위 예측 (Prediction of Lateral Deflection of Model Piles Using Artificial Neural Network by the Application Readjusting Method)

  • 김병탁;김영수;정성관
    • 한국지반공학회논문집
    • /
    • 제17권1호
    • /
    • pp.47-56
    • /
    • 2001
  • 본 논문에서는 단일 및 군말뚝의 수평변위를 예측하기 위하여 신경망 학습속도의 향상과 지역 최소점 수렴을 방지하는 Readjusting 기법을 적용한 인공신경망을 도입하였다. 이 인공신경망을 M-EBPNN 이라고 한다. M-EBPNN에 의한 결과는 낙동강 모래지반에서 단일 및 군말뚝에 대하여 수행한 일련의 모형실험결과와 비교하였으며, 그리고 신경망의 학습속도와 지역 최소점의 수렴성을 평가하기 위하여 오류 역전파 신경망(EBPNN)의 결과와도 비교 분석하였다. M-EBPNN의 적용성 검증을 위하여 200개의 모형실험결과들을 이용하였으며, 신경망의 구조는 EBPNN의 구조와 동일한 한 개의 입력층과 두 개의 은닉층 그리고 한 개의 출력층으로 구성되었다. 전체 데이터의 25%, 50% 그리고 75% 결과는 각각 신경망의 학습에 이용되었으며 학습에 이용하지 않은 데이터들은 예측에 이용되었다. 그리고, 신경망의 최적학습을 위하여 적합한 은닉층의 뉴런 수와 학습률은 EBPNN에서 결정한 값들을 본 신경망에 이용하였다. 해석결과들에 의하면, 동일한 학습패턴에서의 M-EBPNN이 학습 반복횟수는 EBPNN 보다 최고 88% 감소하였으며 지역 최소점에 수렴하는 현상은 거의 나타나지 않았다. 따라서, 인공신경망 모델이 수평하중을 받는 말뚝의 수평변위 예측에 적용될 수 있는 가능성을 보여 주었다.

  • PDF