Browse > Article
http://dx.doi.org/10.12989/gae.2021.24.1.029

A novel preloading method for foundation underpinning for the remodeling of an existing building  

Wang, Chengcan (Department of Civil and Environmental Engineering, Korea University of Science and Technology)
Han, Jin-Tae (Department of Infrastructure Safety Research, Korea Institute of Civil Engineering and Building Technology)
Kim, Seokjung (Department of Infrastructure Safety Research, Korea Institute of Civil Engineering and Building Technology)
Jang, Young-Eun (Innovative SMR System Development Division, Korea Atomic Energy Research Institute)
Publication Information
Geomechanics and Engineering / v.24, no.1, 2021 , pp. 29-42 More about this Journal
Abstract
The utilization of buildings can be improved by extending them vertically. However, the added load of the extension might require building foundations to be underpinned; otherwise, the loads on the foundations might exceed their bearing capacity. In this study, a preloading method was presented aiming at transferring partial loads from existing piles to underpinning piles. A pneumatic-type model preloading device was developed and used to carry out centrifuge experiments to evaluate the load-displacement behavior of piles, the pile-soil interaction during preloading, and the additional loading caused by vertical extension. The results showed that the preloading devices effectively transfer load from existing piles to underpinning piles. In the additional loading test of group piles, the load-sharing ratio of a pile increased with its stiffness. The load-sharing ratio of a preloaded micropile was less than that of a non-preloaded micropile as a result of the reduction in axial stiffness caused by preloading before additional loading. Therefore, a slight reduction of the load-sharing capacity of an underpinning pile should be considered if the preloading method is applied. Further, two full scale preloading devices was developed. The devices preload underpinning piles and thereby produce reaction forces on a reaction frame to jack existing piles upward, thus transferring load from the existing piles to the underpinning piles. Specifically, screw-type and hydraulic-jack type devices were developed for the practical application of foundation underpinning during vertical extension, and their operability and load transfer effect verified via full-scale structural experiments.
Keywords
foundation underpinning; preloading device; centrifuge experiment; full-scale experiment; load-sharing ratio;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Lutenegger, A.J. and Gerald, A.M. (1994), "Uplift capacity of small-diameter drilled shafts from in situ tests", J. Geotech. Eng., 120(8), 1362-1380. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:8(1362).   DOI
2 Mayerhof, G.G. (1976), "Bearing capacity and settlement of pile foundations", J. Geotech. Geoenviron. Eng., 102, 195-228.
3 MOLIT. (2013), Housing Act, Korea Ministry of Land, Infrastructure and Transport:2 (in Korean).
4 Park, D.S. (2018) "Analyses of centrifuge modelling for artificially sensitive clay slopes", Geomech. Eng., 16(5), 513-525. https://doi.org/10.12989/gae.2018.16.5.513.   DOI
5 Qian, Z.Z., Lu, X.L., Yang, W.Z. and Cui Q. (2014), "Behaviour of micropiles in collapsible loess under tension or compression load", Geomech. Eng., 7(5). 477-493. http://doi.org/10.12989/gae.2014.7.5.477.   DOI
6 Wang, C., Han J.T., Jang, Y.E., Ha, I.S. and Kim, S.J. (2018), "Study on the effectiveness of preloading method on reinforcement of the pile foundation by 3D FEM analysis", J. Kor. Geotech. Soc., 34(1), 47-57. https://doi.org/10.7843/kgs.2018.34.1.47.   DOI
7 Wang, C., Han, J.T. and Jang, Y.E. (2019), "Experimental investigation of micropile stiffness affecting the underpinning of an existing foundation", Appl. Sci.. 9(12), 2495. https://doi.org/10.3390/app9122495.   DOI
8 Wang, C., Han, J.T. and Jang, Y.E. (2020), Investigation of Effectiveness of Preloading Method for Existing Foundation Underpinning by Centrifuge Tests, in Geotechnics for Sustainable Infrastructure Development. Springer, Singapore, 61-67.
9 Wang, C., Zhou, S., Wang, B., Guo P. and Su, H. (2016), "Settlement behavior and controlling effectiveness of two types of rigid pile structure embankments in high-speed railways", Geomech. Eng., 11(6), 847-865. https://doi.org/10.12989/gae.2016.11.6.847.   DOI
10 Bruce, D.A. (1988), "Aspects of minipiling practice in the United States", Ground Eng., 21(8), 20-33.
11 Butcher, A.P., Powell, J.J. and Skinner, H.D. (2006), Reuse of Foundations for Urban Sites: A Best Practice Handbook, BRE Press, Watford, U.K.
12 Hong, S. (2017), "Effect of prestress levels and jacking methods on friction losses in curved prestressed tendons", Appl. Sci., 7(8), 824. https://doi.org/10.3390/app7080824.   DOI
13 Wood, D.M. (2004), Geotechnical Modelling, 1st Edition, CRC Press, Boca Raton, Florida, U.S.A.
14 Cho, H.I., Kim, H.S., Sun, C.G. and Kim, D.S. (2020), "Settlement prediction for footings based on stress history from Vs measurements", Geomech. Eng., 20(5), 371-384. https://doi.org/10.12989/gae.2020.20.5.371.   DOI
15 Dykeman, P. and Valsangkar, A.J. (1996), "Model studies of socketed caissons in soft rock", Can. Geotech. J., 33(5), 747-759. https://doi.org/10.1139/t96-100-321.   DOI
16 El Kamash, W. and Han, J. (2017), "Numerical analysis of existing foundations underpinned by micropiles", Int. J. Geomech., 17(6), 04016126. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000833.   DOI
17 El Naggar, M.H. and Sakr, M. (2000), "Evaluation of axial performance of tapered piles from centrifuge tests", Can. Geotech. J., 37(6), 1295-1308. https://doi.org/10.1139/t00-049.   DOI
18 Essler, R. and Yoshida, H. (2004), Jet Grouting, Ground Improvement, 2nd Edition, Taylor & Francis, New York, U.S.A., 160-196.
19 FHWA (2000), Micropile Design and Construction Guidelines-Implementation Manual, FHWA-SA-97-070, Federal Highway Administration, Washington, D.C., U.S.A.
20 Horikoshi K. and Randolph, M.F. (1998), "A contribution to optimum design of piled rafts", Geotechnique, 48(3), 301-317. https://doi.org/10.1680/geot.1998.48.3.301.   DOI
21 Horikoshi, K. and Randolph, M.F. (1996), "Centrifuge modelling of piled raft foundations on clay", Geotechnique, 46(4), 741-752. https://doi.org/10.1680/geot.1996.46.4.741.   DOI
22 Horikoshi, K., Matsumoto T., Hashizume, Y., Watanabe, T. and Fukuyama, H. (2003), "Performance of piled raft foundations subjected to static horizontal loads", Int. J. Phys. Modell. Geotech., 3(2), 37-50. https://doi.org/10.1680/ijpmg.2003.030204.   DOI
23 British Standards (2004), Eurocode 7: Geotechnical Design-Part 1: General Rules, British Standards, U.K.
24 Jang, Y.E. and Han, J.T. (2018), "Analysis of the shape effect on the axial performance of a waveform micropile by centrifuge model tests", Acta Geotechnica, 14(2), 505-518. https://doi.org/10.1007/s11440-018-0657-2.   DOI
25 Juran, I., Benslimane, A. and Hanna, S. (2001), "Engineering analysis of dynamic behavior of micropile systems", Transport. Res, Rec. J. Transport. Res. Board, 1772(1), 91-106. https://doi.org/10.3141/1772-11.   DOI
26 Alawneh, A.S., Malkawi, A.I. and Al-Deeky, H. (1999), "Tension tests on smooth and rough model piles in dry sand", Can. Geotech. J., 36(4),746-753. https://doi.org/10.1139/t98-104.   DOI
27 Khazaei, S., Wu, W., Shimada, H. and Matsui, K. (2016), "Effect of lubrication strength on efficiency of slurry pipe jacking", Proceedings of the GeoShanghai International Conference 2006, Shanghai, China, June.
28 Kim, D.H., Kim, J.H. and Jeong, S.S. (2019), "Estimation of axial stiffness on existing and reinforcing piles in vertical extension remodeled buildings", Eng. Struct., 199, 109466. https://doi.org/10.1016/j.engstruct.2019.109466.   DOI
29 Kim, D.S., Kim, N.R., Choo, Y.W. and Cho, G.C. (2013), "A newly developed state-of-the-art geotechnical centrifuge in Korea", KSCE J. Civ. Eng., 17(1), 77-84. https://doi.org/10.1007/s12205-013-1350-5.   DOI
30 Laefer D.F. (2011), "Quantitative support for a qualitative foundation reuse assessment tool", Proceedings of the Geo-Frontiers 2011: Advances in Getotechnical Engineering, Dallas, Texas, U.S. A., March.
31 Leung, C.R. and Ko, H.Y. (1993), "Centrifuge model study of piles socketed in soft rock", Soils Found., 33(3), 80-91. https://doi.org/10.3208/sandf1972.33.3_80.   DOI