• 한국지반환경공학회 논문집
• /
• 제14권9호
• /
• pp.31-37
• /
• 2013

본 연구는 C.G.S공법 적용 지반을 설치 직경, 설치 간격, 면적 치환율, 지반강성에 따른 모델링을 실시함으로써 주변 지반의 거동을 파악하고자 하였고, 인공신경망의 매개변수 연구를 통해 본 연구에 가장 적합한 인공신경망 모델을 선정하여 수치해석과 인공신경망 연계를 통한 인공신경망 예측 모델을 개발하였다. 그 결과, C.G.S 말뚝 침하량 및 지반 침하량은 직경, 설치 간격, 면적 치환율, 지반강성 별로 일치하여 하나의 곡선으로 나타났으며, 이는 C.G.S 공법 적용 지반의 거동양상이 일정한 형태로 나타남을 의미하는 것으로, 이러한 결과를 바탕으로 3차원 거동에 대한 인공신경망 학습이 가능한 것으로 파악되었다. 인공신경망의 내적인자 연구 결과, 은닉층 뉴런수 10개, 모멘텀 상수 0.2, 학습률의 경우 0.2를 사용할 경우 입력과 출력간의 관계가 적절히 표현되는 것으로 나타났다. 이러한 인공신경망 모델의 최적구조를 이용하여 C.G.S 공법의 지반 거동을 평가한 결과는 결정계수 값이 C.G.S 말뚝 침하의 경우는 0.8737, 지반 침하의 경우는 0.7339, 지반 융기의 경우는 0.7212로 나타나 충분한 신뢰도를 보이고 있음을 알수 있었다.

• 디지털융복합연구
• /
• 제17권3호
• /
• pp.205-213
• /
• 2019

건설현장의 굴토작업과 흙막이 가시설은 서로 밀접한 관계를 가지고 있다. 협소한 공간에서 가장 효율적으로 지하구조물을 축조하고 굴토작업시 외측 배면의 토사 이완을 방지하고 지하수위를 유지하기 위한 방안으로 안전성이 확보된 흙막이 가시설 설치는 반드시 필요하다. 본 연구는 기존 지하층 굴토공사에서 흙의 유실을 방지하기 위해 설치하는 가설흙막이를 종래에는 가설벽체를 형성하고 어스앵커, 래커, 스트러트 등을 이용하여 내부 지보를 하고 굴토공사를 시행하던 방식에서, RSB공법은 기존 재래식공법의 문제점을 개선하여, 내부 지보재를 제거하고 2열 엄지말뚝과 브레이싱을 이용하여 자립으로 토압에 저항하도록 하여 지반굴착을 진행하는 공법이다. 본 연구에서는 RSB공법 현장시범적용과 계측결과를 통하여 굴착방법에 따른 흙막이 가시설의 공법 적용성, 평가결과 발생변위가 모두 계측 허용치 만족하고. 기존 재래식공법에 비해 시공성과 경제성이 향상되었다.

• Smart Structures and Systems
• /
• 제9권3호
• /
• pp.253-271
• /
• 2012

Finite element (FE) model updating is a useful tool for global damage detection technique, which identifies the damage of the structure using measured vibration data. This paper presents the application of a finite element model updating method to detect the damage of a small-scale reinforced concrete building structure using measured acceleration data from shaking table tests. An iterative FE model updating strategy using the least-squares solution based on sensitivity of frequency response functions and natural frequencies was provided. In addition, a side constraint to mitigate numerical difficulties associated with ill-conditioning was described. The test structure was subjected to six El Centro 1942 ground motion histories with different Peak Ground Accelerations (PGA) ranging from 0.06 g to 0.5 g, and analytical models corresponding to each stage of the shaking were obtained using the model updating method. Flexural stiffness values of the structural members were chosen as the updating parameters. In model updating at each stage of shaking, the initial values of the parameter were set to those obtained from the previous stage. Severity of damage at each stage of shaking was determined from the change of the updated stiffness values. Results indicated that larger reductions in stiffness values occurred at the slab members than at the wall members, and this was consistent with the observed damage pattern of the test structure.

• 지질공학
• /
• 제24권4호
• /
• pp.455-461
• /
• 2014

The Honam-Jeju, Korea-Japan, and Korea-China subsea tunnel construction projects have drawn significant attention since the early 2000s. These subsea tunnels are much deeper than most existing natural shallow sea tunnels linking coastal areas. Thus, the need for developing new technologies for the site selection and construction of deep subsea tunnels has recently emerged, with the launch of a research project titled "Development of Key Subsea Tunnelling Technology" in 2013. A component of this research, an analysis of deep subsea geological structure, is currently underway. A ground investigation, such as a borehole or geophysical investigation, is generally carried out for tunnel design. However, when investigating a potential site for a deep subsea tunnel, borehole drilling requires equipment at the scale of offshore oil drilling. The huge cost of such an undertaking has raised the urgent need for methods to indirectly assess the local geological structure as much as possible to limit the need for repeated borehole investigations. This study introduces an indirect approach for assessing the geological structure of the seafloor through a submarine bathymetry analysis. The ultimate goal here is to develop an automated approach to the analysis of submarine geological structures, which may prove useful in the selection of future deep subsea tunnel sites.

• 한국전자파학회논문지
• /
• 제13권5호
• /
• pp.436-444
• /
• 2002

본 논문은 마이크로스트립이나 코플래너 웨이브가이드와 같은 평면형 전송선로의 접지면에 결함 접지 구조(defected ground structure, DGS)를 식각하여 증폭기 의 길이를 줄이는 방법을 제시한다. DGS에 기인하여 발생하는 부가적인 등가의 L-C 성분에 의하여 전파 지연 특성이 표준형 전송선로보다 더욱 크게 나타나는데, 이로 인하여 DGS를 포함한 전송선로의 전기적 길이가 DGS가 없는 동일한 물리적 길이의 전송선로보다 더욱 길다는 점을 이용한다. 즉, 동일한 전기적 길이를 유지하기 위하여 DGS를 삽입한 후 전송선로의 물리적 길이를 줄일 수 있다는 것이 본 논문에서 이용하는 주개념이다. 원래의 전송선로가 증폭기 정합회로의 어느 부분이라고 할 때, DGS를 삽입하고 물리적 길이를 줄임으로써 전기적 길이를 원래 선로와 같게 맞추면 원증폭기의 정합과 성능을 그대로 유지할 수 있다. 제시된 방법을 검증하기 위하여 마이크로스트립, CPW 각각에 대하여 원증폭기를 제작하고, 다시 DGS를 이용하여 길이를 줄인 증폭기를 제작하였다. 그리고 이들 증폭기 정합회로에 포함된 원래의 전송선로와 DGS를 삽입하여 길이를 줄인 전송선로도 각각 제작하였다. 측정된 결과들은 DGS에 의하여 길이가 줄어든 증폭기의 성능이 원증폭기의 성능과 거의 같음을 보여주고 있다. 또한 DGS를 삽입하여 길이를 줄여준 전송선로의 측정된 전기적 길이도 원선로와 거의 유사함을 보여주고 있다.

• 한국농공학회지
• /
• 제42권6호
• /
• pp.98-105
• /
• 2000

Recently, the construction method of high pressure jet-grouting is in wide-use, for the purpose of structure foundation ground, reinforcing of ground behind propped retaining walls and cut-off in order to perform safe construction of underground excavation work. This study was performed a serious of tests of field permeability and unconfined compressive strength upon ground improved established on the ground behind propped retaining walls and examined proper jet mechanism by changing the construction parameter value of high pressure jet-grouting. In addition, we got the conclusion like the followings as a result of inspecting the condition of earth pressure distribution and deformation, using elasto-plastic method and FEM. 1. In that characteristics of strength of ground improved, with the same condition of construction parameter, unconfined compressive strength of sand gravel is shown bigger than that of silty sand by about 1.6 times and cut-off effect is shown to have effect of reducing the permeability of original ground by about 10$^{-2}$ ~10$^{-3}$ cm/s. 2. As a result of analysis of figures of horizontal displacing quantity of propped retaining walls materials regarding before and after High pressure jet- grouting through FEM, the reducing quantity of 0.1~0.3mm in maximum horizontal displacement is shown.

• 한국기계기술학회지
• /
• 제20권6호
• /
• pp.894-900
• /
• 2018

Among the soft ground improvement methods, PBD is the most common construction method because it is cheap and construction is fast. However, if the ground is rigid, additional work is required. In this study, the structural safety, natural vibration, and safety angle of the steel vertical tower structure were evaluated in the development of the PBD composite perforator which can be combined with drilling work and PBD construction. Structural safety was assessed when the wind load of 20 m/s was simultaneously applied to the PBD construction load of 20 tons, the perforating operation of 25 tons, and the wind speed of 50 m/s was applied only to the wind load. The natural frequencies were evaluated up to the sixth mode, and the safety angle was evaluated for static and dynamic safety angles.

• Structural Engineering and Mechanics
• /
• 제91권5호
• /
• pp.469-486
• /
• 2024

Electric transformers are major components of electrical systems, and damage to them caused by earthquakes can result in significant financial loss. The current study modeled a three-dimensional (3D) isolated electrical transformer under horizontal and vertical records from different earthquakes. Instead of using fixed coefficients, an improved wavelet method has been used to create the greatest compatibility between the response spectra and the target spectrum. This method has primarily been used for dynamic analysis of isolated structures with spring-damper devices because it has shown greater accuracy in predicting the response of such structures. The effect of the nonlinear soil-structure interaction on the probability of transformer failure also has been investigated. Soil and structure interaction modeling was carried out using a beam on a nonlinear Winkler foundation. The effect of the nonlinear soil-structure interaction during dynamic analysis of transformers revealed that the greatest increase in the probability of transformer failure was in the fixed-base condition when the structure was located on soft soil. This intensified the response of the structure and increased the probability of transformer failure by up to 27% for far-field and up to 95% for near-field ground motions. A comparison of the results indicates that the use of 3D isolation systems in transformers in areas with soft clay that are subject to near-field ground motions can strongly reduce the probability of failure and improve the seismic performance of the transformer.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1996년도 가을 학술발표회 논문집
• /
• pp.70-77
• /
• 1996

In this study, sliding response analysis of free standing structure such as multi-purpose nuclear spent fuel storage cask is peformed. The governing factors of sliding response are aspect ratio of structure and ground acceleration. The vertical acceleration component is very important factor in the sliding response of the structure. Based on the mathematical model, computer program is developed using direct forward integration method to predict the sliding response. Using the program, several parametric studies were made for sinusodial ground motion and for El Centre 1940 earthquake and Mexico 1973 earthquake. From the results, it is known that the frequency content and duration of strong motion affect the sliding of the structure.

• 한국산학기술학회논문지
• /
• 제5권5호
• /
• pp.403-408
• /
• 2004

We suggest new attenuator design and formula using quad spiral shaped defected ground structure (DGS). Series resistors and quarter wavelength transmission line that has a role of inverter have been synthesized for attenuator design and novel attenuator structure using quad spiral shaped DGS is fabricated, the measurements show good agreement with theoretical anticipations. The suggested attenuator could remove peak of insertion loss graph through various attenuation method. The various attenuations are obtained by attached pin-diodes, 10-15dB attenuation leveling is realized for validity of suggested design.