• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 A
• /
• pp.145-147
• /
• 2002

In this paper, the improved fault locating method using distributed parameter which calculating the reduced voltage and current according to the ground capacitance in long transmission line was proposed. For the purpose of the fault locating algorithm non influenced source impedance, the loop method was used in the system modeling analysis. To enhance the fault locating, zero sequence of the fault current which is variable according to ground capacitance was not used but positive and negative sequence. System model was simulated using EMTP software. To verify the accuracy of proposed method, in different cases 64 sampled data per cycle was used and 160km and 300km long transmission line has fault resistance $0{\Omega}\;and\;100{\Omega}$ respectively was compared.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -1
• /
• pp.233-236
• /
• 2000

A portable equipment that measures a current and voltage waveform of power transmission lines is pro-posed. In the equipment, the current and voltage, respectively, are detected by a loop coil and a capacitor clamped around the power lines. The detected data is transmitted by an FM wave to the receiver on the ground station. Since the receiver is isolated from the power lines, we do not require high potential insulators for the measurement of current and voltage. The proposed equipment is therefore, small-sized, light, and low in the cost of production. Experimental results presented here show that the equipment can monitor the current flowing in single wire over a ground plane and the potential of the wire.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1996-1998
• /
• 2000

In this paper, the electric and magnetic field waveforms produced by cloud-to-groud lightning discharges were measured and statistically analyzed. The measuring system used to measure the electric and magnetic fields is consisted of the hemisphere electric field sensor, the loop magnetic field sensor and the data acquisition system. The stepped leader is appeared before the return stroke. Some parameters of the electric and magnetic fields produced by the stooped leaders in cloud-to-ground lightning discharges were investigated.

• 한국군사과학기술학회지
• /
• 제14권6호
• /
• pp.1058-1066
• /
• 2011

This research paper on Tac-ELINT SW development method using M&S system describes the validation and verification methods of Tac-ELINT ground operating software development each stages, and the method of improving reusability of software using SBD(Simulation Based Design/Development) concept. In this project, We obtain the EW software SBD technologies and improved Tac-ELINT ground operating software through software crisis mitigation. This method and technology will expect to support a future EW system and any other various weapon software development.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.713-718
• /
• 2006

This paper concerns the measurement of thermal conductivity of grouting materials for ground loop heat exchanger. A thermal conductivity meter, QTM-500 based on modified transient hot wire method was used to measure the thermal conductivity of neat bentonite and mixtures of bentonite and various additives. Relative to the total mixture mass, as the percent additive was increased the mixture thermal conductivity increased. For the bentonite-silica sand mixtures, the higher density of the sand particles resulted in much higher mixture thermal conductivity.

• 로봇학회논문지
• /
• 제19권1호
• /
• pp.71-78
• /
• 2024

The paper presents a hardware-in-the-loop (HIL) system designed for satellite movement testing in the microgravity environment on the ground with two industrial robots. Especially, the paper deals with the contact between satellites during rendezvous and docking simulations of satellites using a robotic HILS system. For this purpose, the admittance control method plays a core role in preventing damage to the satellite or robot from contact force between satellites. The coordinate frames are transformed into the mass center of the satellite and the admittance control at the level of exponential coordinates is adopted to actively use the properties of Lie groups related to tracking errors. These methods effectively mitigate the risk of robot damage during inter-satellite contact and ensure efficient tracking performance of satellite movements.

• 한국항공우주학회지
• /
• 제35권5호
• /
• pp.369-374
• /
• 2007

비평면 지면 위를 비행하는 플래퍼론이 있는 날개의 비정상 공력특성을 경계요소법을 사용하여 연구하였다. 시간 전진법을 사용하여 채널과 지면 위를 비행하는 날개 및 플래퍼론의 움직임에 따른 후류의 형상을 모사하였다. 지면 위 또는 채널 내를 비행하는 날개의 공력계수는 플래퍼론의 주기운동에 따라 일정한 루프로 나타난다. 플래퍼론 변화에 따른 롤링모멘트는 지면 위를 비행하는 날개와 채널 내를 비행하는 날개가 동일한 결과를 나타내었다. 피칭모멘트는 지면에서 보다 채널 내를 비행할 때 플래퍼론의 움직임에 따라 더 큰 변화폭을 나타내었다. 본 연구를 통해 비평면 지면 위를 비행하는 운송체의 안정성 해석에 필요한 다양한 공력계수 확보가 가능하다.

• 에너지공학
• /
• 제13권4호
• /
• pp.296-300
• /
• 2004

본 연구는 지열원 물 대 물(water to water)히트 펌프 시스템의 냉방 및 난방 운전시 성능 특성과 경제성 평가에 관한 것이다. 5개의 보어홀당 지중 100m의 깊이로 밀폐 수직형 지중 열교환기(closed-vertical ground source)가 설치된 냉난방 시스템이 적용된 건축물에 대하여 냉난방 운전성능을 평가하였으며, 연간 소비전력을 측정하여 실제 시스템의 경제성을 분석하였다. 또한, 순환수의 입구온도에 따른 시스템의 운전 성능을 분석한 결과 난방시에는 COP가 3.0에서 4.2로 증가한 반면, 냉방시에는 5.0에서 3.7로 감소하였다. 본 실험을 통해서,대상 건축물에 대한 지열 냉난방 시스템의 수명주기비용은 기존 냉난방 시스템(보일러+에어컨)에 비해서 68%까지 절감되었으며, 시스템의 경제성을 고려해 볼 때 기존 건축물에도 지열원 냉난방 시스템을 적용하는 것이 타당하다.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.126-132
• /
• 2017

In this study, we designed, measured, and analyzed a rearranged L-shape magnetic resonance coupling wireless power transfer (MR-WPT) system for practical applications with laptops. The typical four resonator MR-WPT (Tx part: source loop and Tx coil; Rx part: Rx coil and load loop) is difficult to apply to small-sized stationary and mobile applications, such as laptop computers, tablet-PCs, and smartphones, owing to the large volume of the Rx part and the spatial restrictions of the Tx and Rx coils. Therefore, an L-shape structure, which is the orthogonal arrangement of the Tx and Rx parts, is proposed for indoor environment applications, such as at an L-shaped wall or desk. The relatively large Tx part and Rx coil can be installed in the wall and the desk, respectively, while the load loop is embedded in the small stationary or mobile devices. The transfer efficiency (TE) of the proposed system was measured according to the transfer distance (TD) and the misaligned locations of the load loop. In addition, we measured the TE in the active/non-active state and monitor-open/closed state of the laptop computer. The overall highest TE of the L-shape MR-WPT was 61.43% at 45 cm TD, and the TE decreased to 27.9% in the active and monitor-open state of the laptop computer. The conductive ground plane has a much higher impact on the performance when compared to the impact of the active/non-active states. We verified the characteristics and practical benefits of the proposed L-shape MR-WPT compared to the typical MR-WPT for applications to L-shaped corners.

• 한국전자파학회논문지
• /
• 제21권8호
• /
• pp.865-871
• /
• 2010

본 논문에서는 PMP에 적용 가능한 소형의 듀얼 밴드(IEEE 802.11b: 2.4~2.5 GHz, 11a: 5.15~5.825 GHz) 이중 대역 MIMO 안테나를 제안하였다. 제안된 안테나는 2 GHz 대역에서 동작하는 PIFA(평면형 역 F형 안테나)와 5 GHz 대역에서 동작하는 루프(loop) 안테나로 구성되었다. 두 포트의 안테나는 각각 PIFA와 루프로 구성되어져 있으며, 상호 간의 격리도(isolation)를 높이기 위하여 편파 방향과 최대 방사 방향이 서로 수직이 되도록 그라운드 가장자리에 직교(orthogonal) 구조로 배치하였다. 또한, 상관도(correlation) 저감과 더욱 높은 격리도를 얻기 위해, 2 GHz 동작 주파수 대역에서 두 포트의 PIFA가 $\lambda_g$/4 길이의 선(connecting line)으로 연결되어 있으며, 5 GHz 동작 주파수 대역에서는 그라운드 뒷면에 두 루프 안테나 사이를 연결하는 사다리꼴의 평면(connecting plane)을 이용하였다. 듀얼 밴드 MIMO 안테나는 WLAN 대역에서 충분한 이득을 가지며, PMP(Portable Media Player)에 적용 가능한 소형의 안테나로 설계되었다.