• 제목/요약/키워드: ground control system

검색결과 1,292건 처리시간 0.037초

위성항법 지상국 시스템 요구사항 분석에 관한 연구 (A Study on Requirement Analysis of GNSS Ground Station System)

  • 신천식;이상욱;김재훈
    • 한국위성정보통신학회논문지
    • /
    • 제2권1호
    • /
    • pp.48-55
    • /
    • 2007
  • 본 논문은 위성항법지상국시스템 개발을 위하여 시스템 요구사항 정의, 시스템 구성, 시스템에 대한 주요 파라미터별 요구사항 도출 및 분석 결과를 기술한 논문이다. 위성항법 지상국 시스템은 항법 위성인 GPS와 Galileo 위성으로부터 항법 신호를 감시하는 신호감시국과 처리된 위성항법 데이터를 갈릴레오 위성으로 송신하는 상향링크국, 신호감시국 및 상향링크국을 구성하는 장비들에 대한 감시 및 제어기능을 수행하는 감시 및 제어시스템으로 이루어진다. 신호감시국은 항법 수신기와 원자시계, 기상정보처리 및 항법데이타 처리를 담당하는 서브시스템으로 구성되며 항법 수신기는 GPS와 Galileo 위성으로부터 항법 신호를 수신할 수 있는 복합 수신기 형태가 된다. 신호감시국은 항법 정보에 대한 보정정보처리을 위해 위성항법 제어센터인 GCC(GNSS Control Center)와 인터페이스 될 수 있어야 한다.

  • PDF

STUDY ON A CONTACT TYPE SENSOR FOR DETECTING HEIGHT FROM GROUND SURFACE

  • J. K. Ha;Lee, J. Y.;Park, Y. M.;Kim, T. S.
    • 한국농업기계학회:학술대회논문집
    • /
    • 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
    • /
    • pp.178-187
    • /
    • 2000
  • The tillage operation by rotary implements is widely done in Korea. In the case of rotary implements, the tillage depth control system is one of important implement control systems. A contact type-sensor for measurement of the ground height was designed and fabricated to evaluate the possibility of application of the sensor on the tillage depth control system. Indoor experiments were conducted to obtain static and dynamic detection characteristics of the sensor under various conditions; 1) several moisture contents for four soil samples, 2) two soil surfaces with a designed configuration, 3) four heights of the sensor from the soil surface, 4) five traveling speeds of the carrier on which the sensor was attached, and so on. The experimental results showed the detection characteristics of the sensor sufficient as the ground height sensor of the tillage depth control system.

  • PDF

지하수를 이용한 양액냉각시스템 개발에 관한 기초연구 (A Fundamental Study on the Nutrient Solution Cooling System Utilizing Ground Water)

  • 남상운;손정익;김문기
    • 생물환경조절학회지
    • /
    • 제2권1호
    • /
    • pp.1-8
    • /
    • 1993
  • Experimental and theoretical analyses were carried out to investigate the heat exchange characteristics of the nutrient solution cooling system utilizing ground water. The material of heat exchanger used in the experiment was polyethylene and the cross-flow type was adapted in which nutrient solution was mixed and ground water unmixed. For the exchanger surface area of 0.33$m^2$ and flow rates of ground water of 1-6$\ell$/min, NTU(number of transfer units) and effectiveness of experimental heat exchanger were 0.1-0.45 and 10-35%, respectively. Therefore these results showed that the hydroponic greenhouse of 1,000$m^2$(300 pyong) with the ground water of 10$m^2$/day could cover about 55-70% of maximum cooling load in summer.

  • PDF

지상기준점을 이용한 디지털카메라 Boresight Calibration (Digital Photogrammetry Camera Boresight Calibration Using Ground Control Points)

  • 이용욱
    • 한국측량학회지
    • /
    • 제32권4_1호
    • /
    • pp.293-298
    • /
    • 2014
  • 최근의 항공사진측량은 디지털항공사진 카메라와 GPS/ INS를 결합한 통합 센서를 활용하여 Direct Georeferencing 하는 방법이 보편화됐으며, 이를 기반으로 신속하고 정확하게 사진측량을 수행할 수 있게 되었다. Direct Georeferencing을 통해 얻을 수 있는 외부표정요소의 정확도는 GPS/INS에 의해 결정되는데, INS의 회전량 차이를 결정하여 자세정보를 정확하게 계산하는 것이 중요하다. 이를 위해 Boresight Calibration으로 INS의 회전량 차이 및 GPS와 INS 간의 간격과 같은 Misalignment를 결정해야 한다. 이때 많은 수의 지상기준점을 이용하여 항공삼각측량과 Boresight Calibraiton을 하게 되는데, 지상기준점의 수와 배열, 위치에 따라 그 결과가 다르게 나타난다. 연구 결과 모든 사진코스에 지상기준점을 배치할 경우 점수의 변화에 따른 Misalignment와 외부표정요소는 큰 변화가 없었으나 지상기준점이 없는 코스가 있을 경우 그 값들에서 차이가 크게 발생하였다.

무인 항공기를 위한 실시간 경로 재계획 기법: RRT*와 LOSPO를 활용한 환경 변화 고려 (Real-time Path Replanning for Unmanned Aerial Vehicles: Considering Environmental Changes using RRT* and LOSPO)

  • 안정우;우지원;김현섭;박상윤;남경래
    • 한국항행학회논문지
    • /
    • 제27권4호
    • /
    • pp.365-373
    • /
    • 2023
  • 무인 항공기는 다양한 분야에서 널리 활용되고 있으며, 실시간 경로 재계획은 이들 기기의 안전성과 효율성을 향상하는 핵심 요소이다. 본 논문에서는 RRT*와 LOSPO를 기반으로 한 실시간 경로 재계획 기법을 제안한다. 제안된 기법은 먼저 RRT* 알고리즘을 활용하여 초기 경로를 생성하고, LOSPO를 이용하여 경로를 최적화한다. 또한 최적화된 경로를 궤적으로 변경하여 실제 시간과 항공기의 동적한계를 고려할 수 있다. 이 과정에서 환경 변화와 충돌 위험을 실시간으로 감지하고, 필요한 경우 경로를 재계획함으로써 안전한 운행을 유지한다. 이 방법은 시뮬레이션을 통한 실험을 통해 검증되었다. 본 논문의 결과는 무인 항공기의 실시간 경로 재계획에 관한 연구에 중요한 기여할 것으로 기대한다. 또한 이 기법을 다양한 상황에 적용함으로써 무인 항공기의 안전성과 효율성을 향상시킬 수 있다.

5륜을 이용한 주행 속도 비례형 파종축 구동 장치 개발 (Development of a Feed Shaft Driving System for Planters Using the Fifth Wheel as a Speed Sensor)

  • 김중현;김경욱
    • Journal of Biosystems Engineering
    • /
    • 제21권4호
    • /
    • pp.399-405
    • /
    • 1996
  • In order to maintain a constant speed ratio between the tractor and attached seed planter, a feedback control unit to rotate the feed shaft of the planter in proportional to the ground speed of the tractor was designed. The fifth wheel was used as a ground speed sensor for the unit. Using this control unit a feed shaft driving system was developed and tested to estimate its performance both in laboratory and fields. The test results showed that the system rotates the feed shaft proportionally to the ground speed in the range of the normal planting speed of 0.5-0.8m/s with errors less than 5%.

  • PDF

다목적 실용위성2호 관제시스템 운용 (Mission Control System for KOMPSAT-2 Operations)

  • 정원찬;이병선;이상욱;김재훈
    • 한국위성정보통신학회논문지
    • /
    • 제1권2호
    • /
    • pp.76-82
    • /
    • 2006
  • 한국전자통신연구원이 개발하여 항공우주연구원의 관제소에 설치한 아리랑2호 위성 관제시스템은 지난 7월 28일 발사된 아리랑2호 위성의 운용에 사용되고 있다. 아리랑2호 관제시스템의 대표적인 기능으로는 원격측정데이터 수신 및 처리, 원격명령 생성 및 송신, 위성 추적 및 거리측정, 궤도 예측 및 결정, 위성자세 조정계획, 그리고 위성 시뮬레이션 등이 있다. 아리랑2호 위성은 아리랑1호 위성의 임무를 이어받아 수행하며, MSC (Multi Spectral Camera) 및 정밀궤도결정, 정밀자세결정 등을 통해 아리랑1호에 비해 훨씬 향상된 해상도의 사진을 제공하는 성능을 가지고 있다.

  • PDF

KSLV-I 조립콤플렉스 시스템 설계 (KSLV-I Assembly Complex System Design)

  • 진승보;박정주
    • 시스템엔지니어링학술지
    • /
    • 제2권1호
    • /
    • pp.37-41
    • /
    • 2006
  • The KSLV-I satellite launch vehicle will be launched in a space center currently under construction. The Space Center which is an advance post base of space development of Korea is located on Oenaro island in Kohung, South Cholla Province. A Ground Complex of the Space Center consists of an AC(Assembly Complex), a LC(Launch Complex), and a MCC(Mission Control Center). Assembly and test facilities are located in the AC in which stage assembly, integrated assembly, check-up, certification test, and pre-launch test are made effectively. A launch pad, fuel supply facilities, a launch control center and associated supporting facilities are located in the LC, and the MCC has control over the space center. These ground complex facilities have diverse forms of an interface with mechanical device, electric device, and etc. These should also provide optimum condition and performance during launch operation processes of the launch vehicle. This paper introduces the result of R&D for the AC of the ground complex performed during system design period.

  • PDF

호모그래피행렬을 이용한 노면검출 (Ground Plane Detection Using Homography Matrix)

  • 이기용;이준웅
    • 제어로봇시스템학회논문지
    • /
    • 제17권10호
    • /
    • pp.983-988
    • /
    • 2011
  • This paper presents a robust method for ground plane detection in vision-based applications based on a monocular sequence of images with a non-stationary camera. The proposed method, which is based on the reliable estimation of the homography between two frames taken from the sequence, aims at designing a practical system to detect road surface from traffic scenes. The homography is computed using a feature matching approach, which often gives rise to inaccurate matches or undesirable matches from out of the ground plane. Hence, the proposed homography estimation minimizes the effects from erroneous feature matching by the evaluation of the difference between the predicted and the observed matrices. The method is successfully demonstrated for the detection of road surface performed on experiments to fill an information void area taken place from geometric transformation applied to captured images by an in-vehicle camera system.

발전소 직류전압 전선로 접지검출시스템에 관한 연구 (A Study on Ground Fault Detecting System for DC Voltage Line in the Electric Power Plant)

  • 이형기;김남호;박찬호;김택수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 B
    • /
    • pp.754-757
    • /
    • 1995
  • This system can detect a ground fault point or a bad insulated line by measuring a power plant DC feeder insulation resistance at the uninterruptible power status. And when the power plant DC feeder with low frequency AC signal has a ground fault, this measuring system can keep recording of its ground fault current and phase checked by Z.C.T. Therefore the power plant could protect a unexpected service interruption.

  • PDF