• The Korean Journal of Quaternary Research
• /
• v.21 no.1
• /
• pp.27-36
• /
• 2007

The severe damage of cultural heritages induced by natural hazards like heavy rain has been dramatically increased since 1990. The number of the repair works of stone heritage of 2005 was six times as many as those of 1986 year. Especially the ratio of the repair works of Gyeongsang Province and Jeolla Province stood 63% of those of all over the country. Since 1990, the typhoons usually struck the southern part of Korea and went northward. The heavy damage of stone heritages in two provinces was caused by them. We made a preliminary survey the stone heritages that exposed to the natural hazards on the basis of repair works of them and a field survey. The analysis results indicate that the natural hazards such as landslide and soil disaster of the stone heritages related to a sloping surface stood 58% of all kind of natural hazards. The reasons are caused by the 59 % of all the stone heritages distributed in a sloping surface resulted in natural hazards like landslide and soil disaster. The bases of stone heritages can be easily eroded by the surface water with high energy induced by heavy rainfall. Most of the stone heritages like Maebul were engraved on a natural rock wall(outcrop). But some of them engraved on rolling stones are very vulnerable in a change of a base condition caused by erosion and ground subsidence and they can be tilted or fell down. The distribution of the stone heritages vulnerable in natural hazard is related to that of the rainfall distribution compounded five typhoons after 1990. Most of them are included in level two on the rainfall distribution map except those of Taean peninsula and some of Gyeonggi Province. They seem to be rather related to the rainfall distribution of the Typhoon Olga.

• Journal of the Korean association of regional geographers
• /
• v.17 no.3
• /
• pp.332-347
• /
• 2011

This study is to analyze on territorial education described in geography textbooks in Korea and Japan. The following is the result that shows similarities and differences of the geography textbooks when it comes to territorial education. Korea and Japan have a contrasting territorial background. However, both countries start their territorial education by learning the location and shape of their country. Japanese geography textbooks focus on what people in the world think of Japan, but in case of Korea, the geography textbooks focus on how Koreans look at the world. In short, the territorial education in Japan try to emphasize Japan from the view point of the world. The next common ground is that the two countries provide territorial models in their geography textbooks in order to increase understanding. However, the Japanese students are provided with these territory models much earlier than Korean students and these models help them visualize and solidify their concept of territory. And, the two countries both put great importance on teaching territorial sea. In Japan, they try to include EEZ(Exclusive Economic Zone) in their territory. Considering these facts, it can be concluded that Japan is enlarging their concept of national territory as maritime territory. Lastly, after learning of territory the two countries both treat on territorial problems. But Korea treats passively territorial problem as such Dokdo, but Japan treats actively their territorial problems. Like that, the contents of territorial education described in geography textbooks in Korea and Japan are similar in terms of selection, but differ in quality in terms of organization. Therefore, future territorial education in Korea will be actively and successively done through succession and sequence of geography curriculum.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.23 no.6
• /
• pp.449-469
• /
• 2011

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering during 2010. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery, and new and renewable energy. Various topics were presented in the field of general thermal and fluid flow. Research issues mainly focused on the thermal reliability of axial fan and compressor in the field of fluid machinery. Studies on the design of ground source heat pump systems and solar chemical reactors were executed in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer in thermoelectric cooling/power generation systems, combined heat and power systems, carbon nano fluid with PVP, channel filled with metal foam and smoke ventilation in a rescue station of a railroad tunnel. Also the studies on flow boiling of R123/oil mixture in a plain tube bundle and R410A charge amount in an air cooled mini-channel condenser were reported. In the area of industrial heat exchangers, researches on plate heat exchanger, shell and tube heat exchanger, enthalpy exchanger, micro channel PCHE were performed. (3) Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and CO2 were studied. Performance improvement of refrigeration systems are tried applying various ideas of refrigerant subcooling, dual evaporator with hot gas bypass control and feedforward control. The hybrid solar systems combining the solar collection devices with absorption chillers or compression heat pumps are simulated and studied experimentally as well to improve the understanding and the feasibility for actual applications. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. Various studies on heating and cooling systems, HVAC facilities, indoor air environments and energy resources were carried to improve the maintenance and management of building service equipments. In the field of heating and cooling systems, papers on a transformer cooling system, a combined heat and power, a slab thermal storage and a heat pump were reported. In the field of HVAC facilities, papers on a cooling load, an ondol and a drying were presented. Also, studies on HVAC systems using unutilized indoor air environments and energy resources such as air curtains, bioviolence, cleanrooms, ventilation, district heating, landfill gas were studied. (5) In the field of architectural environment and energy, studies of various purposes were conducted such as indoor environment, building energy, renewable energy and green building. In particular, renewable energy and building energy-related researches have mainly been studied reflecting the global interest. In addition, many researches which related the domestic green building certification of school building were performed to improve the indoor environment of school.

• Food Science and Preservation
• /
• v.22 no.4
• /
• pp.465-474
• /
• 2015

This study was conducted to investigate the physicochemical characteristics and storage stabilities of soy sauce and soybean paste sauce added with extracts of pear and sugar. The commercial possibility of these sauces was investigated by sensory and preference evaluations. First, the sensory evaluation of two different particle sizes of soybean paste sauce (Type I, chopped; Type II, ground) was performed. The result of sensory and preference evaluations of soybean paste sauce Type I was higher than those of soybean paste sauce Type II, which the former was used for further analysis. The total polyphenol contents and the 2,2'-azino-bis (3-ethylb enzothiazoline-6-sulfonic acid) (ABTS${\cdot}$+) radical scavenging activities of two sauces were not significantly different (p<0.05). The 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity of soy sauce was higher than that of soybean paste sauce I(p<0.05). The pH, total bacterial count, saltiness, and hunter's color values of both sauces were not changed during the whole storage period (60 days). Viscosity of the soybean paste sauce I was increased while the viscosity of soy sauce was significantly decreased during the storage periods (p<0.05). From these results, it was suggested that the soy sauce and soybean paste sauce I added with pear extract of pear and sugar would be a suitable sauce for smoked duck and meat foods.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.228-240
• /
• 2018

Solar energy is calculated using meteorological (14 station), ceilometer (2 station) and microwave radiometer (MWR, 7 station)) data observed from the Weather Information Service Engine (WISE) on the Seoul metropolitan area. The cloud optical thickness and the cloud fraction are calculated using the back-scattering coefficient (BSC) of the ceilometer and liquid water path of the MWR. The solar energy on the surface is calculated using solar radiation model with cloud fraction from the ceilometer and the MWR. The estimated solar energy is underestimated compared to observations both at Jungnang and Gwanghwamun stations. In linear regression analysis, the slope is less than 0.8 and the bias is negative which is less than $-20W/m^2$. The estimated solar energy using MWR is more improved (i.e., deterministic coefficient (average $R^2=0.8$) and Root Mean Square Error (average $RMSE=110W/m^2$)) than when using ceilometer. The monthly cloud fraction and solar energy calculated by ceilometer is greater than 0.09 and lower than $50W/m^2$ compared to MWR. While there is a difference depending on the locations, RMSE of estimated solar radiation is large over $50W/m^2$ in July and September compared to other months. As a result, the estimation of a daily accumulated solar radiation shows the highest correlation at Gwanghwamun ($R^2=0.80$, RMSE=2.87 MJ/day) station and the lowest correlation at Gooro ($R^2=0.63$, RMSE=4.77 MJ/day) station.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2013

The purpose of this study is to find applicabilities of human bioclimatic maps, using human thermal sensation(comfort) in summer, with microclimatic in situ data and computer simulation results at the study site of downtown Daegu. This includes the central business district(CBD) area and two urban parks, the Debt Redemption Movement Memorial Park and the 2.28 Park, for urban and landscape planning and design. Climatic data and urban setting information for the analysis of human thermal sensation were obtained from in situ measurement and the geographic information system data. As a result, the CBD had higher air temperature than the parks when the wind speed was low. Relative humidities were opposite to the air temperature. Especially, same directional streets with local wind direction had lower air temperature than streets perpendicular to the wind direction. The most important climatic variable of human thermal sensation in summer was direct beam solar radiation. Also, creating shadow areas would be the most relevant method for modifying hot thermal environments in urban areas. The most effective method of creating shadow patterns was making a tree shadow over a pergola, and the second best one was making a tree shadow on the front of north directional building walls. Moreover, how to plant trees for creating shadow patterns was important as well as what kind of trees should be planted. The results of human thermal sensation were warm to very hot at sunny areas and neutral to warm at shaded ones. At the sunny areas, wide, squared shape areas had a little bit higher thermal sensation than those of narrow streets. The albedo change of building walls 0.15 and ground surface 0.1 could change 1/6 of a sensation level at the shaded areas and 1/3 at the sunny ones. These microclimatic approaches will be useful to find appropriate methods for modifying thermal environments in urban areas.

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.251-256
• /
• 2010

Objective of this research was to investigate the influence of $NH_4^+$ and $NO_3^-$ ratios in liquid feeding on the growth of snapdragon 'Potomac Red' and changes in medium chemical properties. The seeds were sown into 200 plug trays and fertigated once a week with nutrient solution containing various ratios of $NH_4^+$ and $NO_3^-$ such as 0 : 100, 27 : 73, 50 : 50, 73 : 27, and 100 : 0. The total N concentrations were adjusted to 50, 100 and $150\;mg{\cdot}L^{-1}$ in plug stages of 2, 3, and 4, respectively. Determination of seedling growth and analysis of plant tissue and root medum were conducted at 56 days after sowing. The treatment of 27 : 73 ($NH_4^+:NO_3^-$) had the greatest plant height, fresh weight, and dry weight. The N and P contents in 27 : 73 ($NH_4^+:NO_3^-$) treatment based on the above ground plant tissues were 2.39 and 0.39%, respectively, which were the greatest among treatments. The elevation of $NH_4^+$ ratio in fertigation solution decreased tissue Ca and Mg contents, but that did not influence tissue K content. The variations in $NH_4^+:NO_3^-$ ratios impacted the soil solution pH and the difference among treatments had been severe since three weeks after sowing. Elevation of $NH_4^+$ ratios in fertigation solution increased electrical conductivity and concentrations of K, Ca, and Mg in soil solution of root medum. The $NH_4^+$ and $NO_3^-$ concentrations in the soil solution were high in weeks 2, 3, and 4, then decreased gradually as the biomass of seedlings increased. Medium P concentration decreased gradually as seedlings grew, but statistical differences were not observed among treatments.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.1
• /
• pp.27-41
• /
• 2016

This study was performed to investigate the community structure and health assessment of macrobenthic assemblages in Geoje-Hansan Bay, Southern Coast of Korea. Macrobenthos were collected by van Veen grab sampler at May (spring) and August (summer) 2013. The total species number and mean density were 300 species $7.6m^{-2}$ and $1,994ind.\;m^{-2}$, respectively. The major dominant species were the polychaetes Lumbrineris longifolia ($299{\pm}164ind.\;m^{-2}$), Aphelochaeta monilaris ($100{\pm}57ind.\;m^{-2}$), the bivalve Musculista senhousia ($91{\pm}96ind.\;m^{-2}$) and the polychaete Praxillella affinis ($80{\pm}66ind.\;m^{-2}$). From the community statistics [cluster analysis and nonmetric multidimentional scaling (NMDS) ordination], the macrobenthic community was distinguished into two groups of inner bay (farming ground of near Sandal Island) and channel station(from Hansan Island to Chubong Island) group. In this study, the ecological status was assessed by four biotic indices Shannon's H', the ATZI Marine Biotic Index (AMBI), multivariate-AMBI (M-AMBI) and the Environment Conservation Index (ECI). The ecological status of the macrobenthic community in Geoje-Hansan Bay were poorer in the inner bay station than in the channel station. The results of the present study showed that three biotic indices (Shannon's H', M-AMBI and ECI) were valid as an index for evaluating the ecological status than the AMBI.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.6
• /
• pp.637-652
• /
• 2015

In the present work, a number of three-dimensional (3D) parametric numerical analyses have been carried out to study the influence of tunnelling on the behaviour of adjacent piles considering the transverse distance of the pile tip from the tunnel. Single piles and $5{\times}5$ piles inside a group with a spacing of 2.5d were considered, where d is the pile diameter. In the numerical modelling, several key issues, such as the tunnelling-induced pile settlements, the interface shear stresses, the relative shear displacements, the axial pile forces, the apparent factors of safety and zone of influence have been rigorously analysed. It has been found that when the piles are inside the influence zone, the pile head settlements are increased up to about 111% compared to those computed from the Greenfield condition. Larger pile settlements and smaller axial pile forces are induced on the piles inside the pile groups than those computed from the single piles since the piles responded as a block with the surrounding ground. Also tensile pile forces are induced associated with the upward resisting skin friction at the upper part of pile and the downward acting skin friction at the lower part of pile. On the contrary, when the piles were outside the influence zone, tunnelling-induced compressive pile forces developed. Based on computed load and displacement relation of the pile, the apparent factor of safety of the piles was reduced up to about 45%. Therefore the serviceability of the piles may be substantially reduced. The pile behaviour, when considering the single piles and the pile groups with regards to the influence zone, has been analysed by considering the key features in great details.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.95-95
• /
• 2017

Lodging is a serious issue in rice production, because it drastically decreases the biomass production and grain yield. Since the Green Revolution, the lodging resistance has been increased by lowering the moment of above-ground parts due to the short culm by the semi-dwarf gene sd1. However, it has been pointed out that sd1 alone has suppressive effects for biomass production and yield. To increase rice yield, the long-culm and large panicle type varieties with a superior lodging resistance need to be developed. To improve the lodging resistance and yield of these type varieties, it would be effective to identify novel alleles for these traits underlying natural variations in rice and to pyramid these alleles to a single rice variety. In order to perform this strategy, we have developed new rice lines derived from crosses among varieties with superior alleles. At first, TULT-gh-5-5 was selected from a cross between strong culm and high biomass variety Leaf Star and high-yielding variety Takanari, and TUAT-32HB was selected from a cross between high-yielding variety Akenohoshi and Takanari. Then, we developed the super thick-culm and super grain-bearing line, LTAT-29 derived from a cross between TULT-gh-5-5 and TUAT-32HB. In the current study, to identify the QTLs and genes relating to the strong culm and the high yield of LTAT-29, we performed QTL analysis using SNPs markers with $F_2$ population derived from a cross between LTAT-29 and Takanari. LTAT-29 has never lodged throughout the growth period despite it had long culms and heavy panicles. LTAT-29 had a larger outer diameter of the culm and twice the size of the section modulus than Takanari. As a result, the bending moment at breaking of LTAT-29 was significantly larger than that of Takanari. Brown rice yield of LTAT-29 was $9.2t\;ha^{-1}$ about 10% higher than that of Takanari due to the larger number of spikelets per panicle. LTAT-29 had a greater number of secondary branches per panicle. In the $F_2$ population between LTAT-29 and Takanari, we found continuous frequency distributions in the section modulus and the spikelet number per panicle. Two QTLs increased the section modulus by the alleles of LTAT-29 were detected on Chr.1L and Chr.2L. One QTL increased the spikelet number per panicle of Takanari by the allele of LTAT-29 was detected on Chr.1L, and two QTLs increased the number of secondary branches per panicle by the alleles of LTAT-29 were detected on Chr.1L and Chr.4L. It was found that the alleles of these QTLs were the japonica type originated from Leaf Star or Akenohoshi. The novel QTLs for the traits related to super thick-culm and super grain-bearing and their combinations could be utilized for improving the lodging resistance and yield in rice varieties.