• Design & Manufacturing
• /
• 제16권4호
• /
• pp.34-39
• /
• 2022

Sustained economic development around the world is accelerating resource depletion. Research and development of secondary batteries that can replace them is also being actively conducted. Secondary batteries are emerging as a key technology for carbon neutrality. The core of an electric vehicle is the battery (secondary battery). Therefore, in this study, the temperature change by the heat source of the hammer and the rotational speed (rpm) of the abrasive disc of the Classifier Separator Mill (CSM) was repeatedly calculated and analyzed using the heat flow simulation STAR-CCM+. As the rotational speed (rpm) of the abrasive disk increases, the convergence condition of the iteration increases. Under the condition that the inlet speed of the Classifier Separator Mill (CSM) and the heat source value of the disc hammer are the same, the disc rotation speed (rpm) and the hammer temperature are inversely proportional. As the rotational speed (rpm) of the disc increases, the hammer temperature decreases. However, since the wear rate of the secondary battery material increases due to the strong impact of the crushing rotational force, it is determined that an appropriate rpm setting is necessary. In CSM (Classifier Separator Mill), it is judged that the flow rate difference is not significantly different in the direction of the pressure outlet (Outlet 1) right above the classifier wheel with the fastest flow rate. Because the disc and hammer attachment technology is adhesive, the attachment point may deform when the temperature of the hammer rises. Therefore, it is considered necessary to develop high-performance adhesives and other adhesive technologies.

• 한국산림과학회지
• /
• 제106권1호
• /
• pp.54-62
• /
• 2017

산림바이오매스의 효율적인 수집 및 운반을 위하여 칩하베스터를 개발하고 작업 생산성 및 비용을 분석하였다. 칩하베스터의 주요 목표제원은 속도 8 km/hr, 최대등판능력 $30^{\circ}$, 최대적재량 2,000 kg 등이고, 차체구조는 회전반경을 줄이기 위하여 차체굴절식을 채택하고, 주행장치는 6륜 구동으로 후륜은 접지력을 높이기 위하여 탠덤보기방식을 채택하였다. 개발된 칩하베스터의 주행테스트 결과, 칩 적재시 ${\pm}10%$ 경사에서 각각 6.9 km/hr, 8.1 km/hr로 나타났다. 또한, 공차시 ${\pm}10%$ 경사에서 각각 7.3 km/hr, 7.9 km/hr로 나타났다. 따라서, 주행성능은 개발목표를 달성하였다고 판단된다. 작업생산성 및 비용을 분석한 결과, 파쇄 및 운반의 작업생산성은 약 $10m^3$/일이었으며, 작업비용은 393,126원/일로 나타났다.

• Tribology and Lubricants
• /
• 제27권5호
• /
• pp.269-274
• /
• 2011

The purpose of this paper is to study and analyze the improvement method for the failure examples including the vehicle brake system in actual field. It was verified that the indicator plate of pad wear scratched the brake disk because of wearing after displacement of non- identification parts pad. The caliper of other vehicle was installed with brake system verified the phenomenon produced groove in center point because of one side wear when the pad was not fully contacted with the rub disk by other action surface pressure and pad action condition. It verified that the crack phenomenon fatigue was produced by brake thermal deformation because of decreasing the thickness by grinding to modify the non-uniformed wear of brake disk. It verified that the friction sound was produced by the friction phenomenon because of non-uniformed contact of lining and an alien substance with inner of the drum and lining braking by crack phenomenon with brake drum surface.

• 한국세라믹학회지
• /
• 제21권1호
• /
• pp.27-32
• /
• 1984

During the last decade there have been many studies on the new ceramics especially engineering ceramics. Sintered silicon carbide is one of the main materials in engineering ceramics. This study shows the effects of surface treatment and microstructure especially the abnormal grain growth on the strength of sintered SiC. Surface of sintered SiC and treated with 400, 800 and 1200 grit diamond wheel. Grain growth is introduced by increasing the sintering times at 205$0^{\circ}C$. The $\beta$longrightarrow$\alpha$ transformation occurs during the sintering of $\beta$-starting materials and is often accompanied by abnormal grain growth. The overall strength distribution are estimated using the Weibull statistics. The results show that the strength of sintered SiC is limited by extrinsic surface flaws in normal-sintered specimens. And it is sound that the finer the surface finishing and the grain size the higher the strength results. But the strength of abnormal sintering specimens is limited by the abnormally-grown large tabular grains. The Weibull modulus increases with the decreasing grain size and the decreasing grit size of grinding.

• 한국정보통신학회논문지
• /
• 제18권7호
• /
• pp.1525-1530
• /
• 2014

본 논문은 산업용 로봇을 위한 힘 피드백 제어 기반의 연마면의 보정과 작업자의 감각을 기반으로 한 정확한 연마면 작업을 대체하기 위한 교시방법을 적용한 연마 결과를 제시하였다. 교시방법은 연마작업의 위치, 경로, 반응에 대한 정밀도 개선을 위해서 연마로봇에 적용하였다. 힘 센서 기반의 교시방법에 의해 연마가 가능한 선박용 연마로봇을 제시하였고, 힘 센서에 의한 교시방법을 연마로봇에 적용하여 실험한 결과를 제시함으로써 그 유효성을 검증하였다. 또한, 로봇교시 포인터의 수를 줄이기 위하여 가공면의 특이점들만을 이용하여 곡면 가공이 가능하도록 로봇 궤적을 생성하는 방안을 제시하여 실험결과를 제시하였다.