• 대한기계학회논문집B
• /
• 제24권9호
• /
• pp.1148-1156
• /
• 2000

The QUICK scheme for convection terms is modified for unstructured finite volume method by using linear reconstruction technique and validated through the computation of two well defined laminar flows. It uses two upstream grid points and one downstream grid point in approximating the convection terms. The most upstream grid point is generated by considering both the direction of flow and local grid line. Its value is calculated from surrounding grid points by using a linear construction method. Numerical error by the modified QUICK scheme is shown to decrease about 2.5 times faster than first order upwind scheme as grid size decreases. Computations are also carried out to see effects of the skewness and irregularity of grid on numerical solution. All numerical solutions show that the modified QUICK scheme is insensitive to both the skewness and irregularity of grid in terms of the accuracy of solution.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2005년도 추계 학술대회논문집
• /
• pp.157-162
• /
• 2005

Parallel implementation and performance assessment of the grid assembly in a structured chimera grid approach is studied. The grid assembly process, involving hole cutting and searching donor, is parallelized on the PC cluster. A message passing programming model based on the MPI library is implemented using the single program multiple data(SPMD) paradigm. The coarse-grained communication is optimized with the minimized memory allocation because that the parallel grid assembly can access the decomposed geometry data in other processors by only message passing in the distributed memory system such as a PC cluster. The grid assembly workload is based on the static load balancing tied to flow solver. A goal of this work is a development of parallelized grid assembly that is suited for handling multiple moving body problems with large grid size.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.800-801
• /
• 2011

This paper proposes a grid-connected to rotor type doubly fed induction generator (DFIG) in which the rotor winding is connected to the grid instead of the stator winding. The stator size and weight of the proposed grid-connected to rotor type DFIG can be reduced because the proposed type can use rotor core more efficiently compared to the stator type DFIG. In order to verify the size and weight reduction of the proposed type, the loading distribution method (LDM) is utilized. As a design result, the stator outer diameter and weight of the proposed type were decreased. The equivalent circuit analysis and finite element method also performed to verify the design results and to analyze characteristics of the novel DFIG.

• 한국화재소방학회논문지
• /
• 제33권6호
• /
• pp.9-19
• /
• 2019

건축물의 화재안전성평가를 위한 화재시뮬레이션에서 화원면적 및 격자크기의 변화는 예측결과에 큰 영향을 미칠 수 있다. 따라서 동일한 최대 열발생률을 갖는 화원의 면적 변화가 구획화재의 예측결과에 미치는 영향이 검토되었으며, 동일한 화원면적의 조건에서 격자크기에 대한 예측결과의 의존도가 동시에 검토되었다. 주요 결과로서, 특성화재직경을 기준으로 6개 이상의 격자가 삽입되면 화원면적이 변화되더라도 격자크기는 화재의 열 및 화학적 특성에 큰 영향을 미치지 않았다. 또한 화원면적의 변화는 구획 내부에서 허용피난시간(ASET)과 관련된 주요 물리량의 예측결과에 상당한 차이를 야기하였다. 그러나 개구부를 기준으로 일정 거리 이상의 구획외부에서는 화원면적의 변화가 전반적 화재특성에 미치는 영향이 크지 않음이 확인되었다.

• 한국지리정보학회지
• /
• 제19권3호
• /
• pp.127-143
• /
• 2016

본 연구는 상이한 셀 크기에 따라 밀도구분적 인구추정의 정확성이 어떻게 변화하는지를 탐색하였다. 미국 조지아주 풀턴 카운티를 사례로 한 밀도구분적 인구 지도가 지능적인 밀도구분적 지도제작기법, 인구자료, 원본 및 모의된 토지이용 및 피복 자료를 이용하여 30m에서 420m의 해상도까지 매 30m 간격으로 생성되었다. 밀도구분적 인구 지도의 정확성은 RMSE 및 수정 RMSE 통계치를 이용하여 평가되었다. 프랙털 차원 값은 TPSA 방법을 사용하면서 30m에서 420m의 해상도까지 생성된 밀도구분적 인구 지도에 대해 각각 계산되었다. 연구결과에 따르면, 속성의 정확성 측면에서 인구를 보다 정확하게 추정하기 위해서 210m 이하의 격자 셀 크기가 적절하였나, 사례지역에서 밀도구분적 인구추정의 허용가능한 공간적 정확성을 충족시키기 위해 30m의 격자 셀 크기가 적절하였다. 또한, 프랙털 분석은 120m의 격자 셀 크기가 사례지역에서 밀도구분적 인구추정을 위한 최적의 해상도 이다는 것을 보여준다.

• 대기
• /
• 제16권4호
• /
• pp.359-370
• /
• 2006

Terrain height variance spectra for the Korean mountain region are calculated in order to determine an adequate grid size required to resolve terrain forcing on mesoscale model simulation. One-dimensional spectral analysis is applied to specifically the central-eastern part of the Korean mountain region, where topographical-scale forcing has an important effect on mesoscale atmospheric flow. It is found that the terrain height variance spectra in this mountain region has a wavelength dependence with the power law exponents of 1.5 at the wavelength near 30 km, but this dependence is steeply changed to 2.5 at the wavelength less than 30 km. For the adequate horizontal grid size selection on mesoscale simulation two-dimensional terrain height spectral analysis is also performed. There is no directionality within 50% of spectral energy region, so one-dimensional spectral analysis can be reasonably applied to the Korea Peninsula. According to the spectral analysis of terrain height variance, the finer grid size which is higher than 6 km is required to resolve a 90% of terrain variance in this region. Numerical simulation using WRF (Weather Research and Forecasting Model) was performed to evaluate the effect of different terrain resolution in accordance with the result of spectral analysis. The simulated results were quantitatively compared to observations and there was a significant improvement in the wind prediction across the mountain region as the grid space decreased from 18 km to 2 km. The results will provide useful guidance of grid size selection on mesoscale topographical simulation over the Korean mountain region.

• 대한전자공학회논문지SD
• /
• 제44권12호
• /
• pp.37-42
• /
• 2007

클락 그리드 네트워크(Clock Grid Network)는 대부분의 고속 마이크로 프로세서에서 클락 스큐를 줄이기 위한 일반적인 방법이다. 본 논문은 클락 그리드의 모델링과 분석을 위해서 S-파라미터(Scattering Parameter)를 사용한 새로운 효과적인 방법을 제안한다. 또한, 그리드 사이즈와 와이어(wire) 폭이 그리드의 클락 스큐에 미치는 영향을 제시한다. 본 논문에서 클락 그리드의 상호 연결은 RC 수동소자에 의해서 모델화 되고, 제안된 방법의 결과는 Hspice의 시뮬레이션 결과와 비교해서 10 % 내의 오차를 보여준다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.66-69
• /
• 2002

This article outlines the capabilities of a viewer component called GridViewer, and proves its reusability. GridViewer was designed for the construction of the image display part of GIS or remote sensing application software, and consequently it is particularly straightforward to closely couple GridViewer with access to very large images. Displaying is performed through pyramid structure, which enables to treat very large dataset up to several gigabytes in size under the limited capability of PC. GridViewer is free from responsibility to handle various formats of raster data files by taking grid coverage, which is designed by OGC to promote interoperability between implementations done by data vendors and software vendors providing analysis and grid processing implementations. GridViewer differs from other such viewer by allowing for clients to extend its function and capability by using small set of methods originally implemented in it. We show its reusability and expandability by applying it in developing application programs performing various functions not supported originally by the GridViewer COM component.

• International Journal of Computer Science & Network Security
• /
• 제22권12호
• /
• pp.29-36
• /
• 2022

Smart grid (SG) software platforms and communication networks that run and manage the entire grid are increasingly concerned about cyber security. Characteristics of the smart grid networks, including heterogeneity, time restrictions, bandwidth, scalability, and other factors make it difficult to secure. The age-old strategy of "building bigger walls" is no longer sufficient given the rise in the quantity and size of cyberattacks as well as the sophisticated methods threat actor uses to hide their actions. Cyber security experts utilize technologies and procedures to defend IT systems and data from intruders. The primary objective of every organization's cybersecurity team is to safeguard data and information technology (IT) infrastructure. Consequently, further research is required to create guidelines and methods that are compatible with smart grid security. In this study, we have discussed objectives of of smart grid security, challenges of smart grid security, defensive cybersecurity techniques, offensive cybersecurity techniques and open research challenges of cybersecurity.

• 소성∙가공
• /
• 제20권4호
• /
• pp.316-323
• /
• 2011

The hot curvature-forming of large aluminum thick plate using a grid-typed hybrid die is a process for the production of a spherical LNG tank. Many variables such as the initial die surface quality, grid size, grid thickness, size of blank plate and cooling line design, control the success of the process. In addition, the plate used in this process is generally larger than $10{\times}10m$ in size. Thus, it is very difficult to predict the surface characteristics of the plate during forming and to measure the different parameters due to the high cost of the experiments. In order to optimize the process design for the grid-type die, the development of an analytical method to predict the surface characteristics of the final product in hot curvature-forming is needed. This paper described the development of the method and procedures for FE simulations of the hot curvature-forming process, including hot forming, air flow, cooling, and thermal deformation analyses. An experiment for a small scale model of the process was conducted to check the validity of the numerical method. The results showed that the curvature of the plate in the analysis agrees well with that of the experiment within 0.037 and 0.016% tolerance margins for its side and corner, respectively.