• Applied Microscopy
• /
• 제31권4호
• /
• pp.315-323
• /
• 2001

Kaolinite분말 시료를 이용한 TEM 직접 가열 실험에서 얻은 결론은 아래와 같다. (1) Gatan사의 가열 시료지지대에서 사용하고 있는 증류수 순환장치는 $500^{\circ}C$이상의 가열 실험에서 시료의 유동을 막는 필수적인 장비이다. (2) $600^{\circ}C$이하의 가열 실험에서는 분말의 두께에 따른 상전이 진행정도의 차이가 나타나기 때문에 앙은 시편과 두꺼운 시편을 고루 관찰하는 노력이 필요하다. (3) $900^{\circ}C$ 이상의 고온 가열 실험에서는 융점이 높은 Mo-grid의 사용이 필수적이다. 전체적으로 온도 상승률이나 온도 지속 시간이 상전이 과정에 미치는 영향이 증가하기 때문에 이들의 정량적인 제어가 가능한 자동제어방식의 사용이 필요하다. (4) 단면 관찰을 위해 고온용 epoxy에 포매된 kaolinite분말의 TEM가열 실험은 고온 가열시 epoxy의 유동 문제를 극복할 새로운 방법의 개발이 필요하다.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.35-42
• /
• 1995

his paper is to develop a GIS application model (GISCELWAB) for the spatial simulation of surface runoff from a small watershed. The model was constituted by three submodels : The input data extraction model (GISINDATA) which prepares cell-based input data automatically for a given watershed, the cell water balance model (CELWAB) which calculates the water balance for a cell and simulates surface runoff of watershed simultaneously by the interaction of cells, and the output data management model (GISOUTDISP) which visualize the results of temporal and spatial variation of surface runoff. The input data extraction model was developed to solve the time-consuming problems for the input-data preparation of distributed hydrologic model. The input data for CELWAB can be obtained by extracting ASCII data from a vector map. The output data management model was developed to convert the storage depth and discharge of cells into grid map. This model enables to visualize the spatial formulation process of watershed storage depth and surface runoff wholly with time increment.

• 한국도서관정보학회지
• /
• 제38권3호
• /
• pp.117-138
• /
• 2007

초고전압투과 전자현미경(HVEM)을 이용한 e-Science 환경을 구축하기 위해서는 HVEM의 원격제어시스템과 HVEM에 의해 생성된 데이터의 효율적인 관리와 공유를 위한 데이터포털이 필요하다. 그리고 이러한 데이터포털에서 생성된 데이터의 구조화, 저장 및 관리, 탐색, 공유를 위해서는 HVEM에 적합하게 특화된 메타데이터가 필요하다. 본 연구에서는 e-Science 환경 하에서 HVEM에 의해 생성된 데이터의 보다 효율적인 관리와 공유를 위하여 HVEM에 적합하게 특화된 메타데이터 모형을 제시하였다.

• 한국결정학회지
• /
• 제15권1호
• /
• pp.5-8
• /
• 2004

Copper(I) bromide(CuBr) 와 pyrazine($C_4H_4N_2$, pyz)의 수열 반응으로 2차원 배위 고분자 [CuBr(pyz)] (1)이 얻어졌다. X-ray 구조 결정 결과, 고분자 1은 4.0${\times}$5.7 ${\AA}$ 크기를 갖는 직사각형 격자들을 토대로 한 2차원 그물 망 구조를 갖고 있었다. 고분자 1은 b-축 방향으로 통로(channel)를 갖고 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.934-939
• /
• 2001

In computational study of the flow in piston engines and the flow through moving valves, the use of moving vertices is essential for modelling flows with moving boundaries. The positions of cell vertices in such cases must be allowed to vary with time. To simulate 3-dimensional port-valve and piston-cylinder of HIMSEN 6H21/32 engine, a commercially available code, STAR-CD, was used. Changes in mesh geometry was specified by PROSTAR commands.(i.e. the Change Grid operation in the EVENTS command module.) Control of the intake flow is expected to play an important role as designers seek to obtain better fuel spray characteristics, fuel mixing and mixture preparation, combustion performance, and emissions reductions to meet national standards. As a result of analysis, velocity fields indicate the presence of a structured flow comprised of one pair of counter-rotating vortices under the intake valve during the early induction process. These flow structures remain visible for most of the intake process. As the piston moves towards BDC, these vortices develops into a larger tumbling motion that dominates the flow structure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 추계학술대회 논문집 학회본부
• /
• pp.348-351
• /
• 1995

A modified silicon direct bonding method has been developed alloying an intimate contact between grooved and smooth mirror-polished oxide-free silicon wafers. A regular set of grooves was formed during preparation of heavily doped $p^+$-type grid network by oxide-masking und boron diffusion. Void-free bonded interfaces with filing of the grooves were observed by x-ray diffraction topography, infrared, optical. and scanning electron microscope techniques. The presence of regularly formed grooves in bending plane results in the substantial decrease of dislocation over large areas near the interface. Moreover two strongly misoriented waters could be successfully bonded by new technique. Diodes with bonded a pn-junction yielded a value of the ideality factor n about 1.5 and the uniform distribution of series resistance over the whole area of horded pn-structure. The suitability of the modified technique was confirmed by I - V characteristics of power diodes and reversly switched-on dynistor(RSD) with a working area about $12cm^2$. Both devices demonstrated breakdown voltages close to the calculation values.

• Asian Journal of Atmospheric Environment
• /
• 제8권2호
• /
• pp.108-114
• /
• 2014

In the companion paper (Lee et al., 2012), it was showed that CMAQ simulation using a lateral boundary conditions (LBCs) derived from RAQMS-CMAQ linkage, compared to the CMAQ results with the default CMAQ LBCs, improved ozone simulations in the conterminous US domain. In the present paper, the study is extended to investigate the influence of LBCs on PM2.5 simulation. MM5-SMOKE-CMAQ modeling system was used for meteorological field generation, emissions preparation and air quality simulations, respectively. Realtime Air Quality Modeling System (RAQMS) model assimilated with satellite observations were used to generate the CMAQ-ready LBCs. CMAQ PM2.5 simulations with RAQMS LBCs and predefined LBCs were compared with U.S. EPA Air Quality System (AQS) measurements. Mean PM2.5 lateral boundary conditions taken from RAQMS outputs showed strong variations both in the horizontal grid and vertical layers in the northern and western boundaries and affected the results of CMAQ PM2.5 predictions. CMAQ with RAQMS LBCs could improve CMAQ PM2.5 predictions resulting in the improvement of index of agreement from 0.38 to 0.63.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.341-347
• /
• 1996

Spray pyrolysis 방법으로 넓은 면적의 $Cu_2S$/CdS 태양전지를 제작하였다. 제작과정에서 전극형성, CdS spray 온도조건, $Cu_2S$층의 접합 조건등 태양전지의 효율에 영향을 주는 요인을 조사하였다. CdS 박막의 조건은 주사 전자현미경, X-선 회절기, 온도변화에 따른 광흡수 및 관전도 특성등을 통해 결정하였다. 1$\textrm{cm}^2$의 면적의 전지에 air mass 2(AM2)인 75mW/$\textrm{cm}^2$로 빛을 조사했을 때 3.15%의 효율을 얻었다.

• 한국염색가공학회지
• /
• 제32권4호
• /
• pp.239-244
• /
• 2020

Polyethylene (PE) micro-fiber have been prepared at different hot air temperature (60, 80 and 100 ℃) and different pressure (20, 40, 60 and 80 kPa) by melt centrifugal spinning technique. The parameters of melting centrifugal spinning including polymer contents, rotational velocity, temperature of hot air and pressure were optimized for the fabrication process. The study showed that 8000 rpm rotational velocity, 80 ℃ heated hot air and 40 kPa air pressure are the best condition to obtain uniform and strong PE fiber. The prepared PE fibers were analyzed by field emission scanning electron microscope and universal testing machine and found that fibers with reduced diameter and improved tensile strength are obtained at hot air condition.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권7호
• /
• pp.23-33
• /
• 2015

This study was conducted to provide the preliminary data on preparation for policy decisions regarding the groundwater supply scheme for N. Korea vulnerable to drought. Agricultural activities oriented to upland field due to the mountainous terrain more than 79% as well as the diversity of rainfall distribution over the country make more vulnerable to structural problems in the drought in N. Korea. Therefore, in anticipation of the expansion of exchange policies in agricultural sector, the available amount of groundwater needed for sustainable water resources supply was estimated for each administrative district after analyzing alluvium and hydrogeology distribution in N. Korea. Overall, the available amount of groundwater was estimated to 22.3 billion m³ (0.18 million m³/km²). The available amount of groundwater per unit area in Ryanggangdo and Gaesungsi was appeared very high in each of 0.56 and 0.39 million m³/km², respectively, and it would be interpreted that two districts have relatively wide area of volcanic rocks and alluvium with highly permeable characteristics, respectively. Finally, to maximize the utilization of this study result, the available amount of groundwater distribution map was developed on the basis of the 1 × 1 km grid network over the entire N. Korea.