• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.561-567
• /
• 2011

This paper presents a high-efficiency power conditioning system (PCS) for grid-connected photovoltaic (PV) modules. The proposed PCS consists of a step-up DC-DC converter and a single-phase DC-AC inverter for the grid-connected PV modules. A soft-switching step-up DC-DC converter is proposed to generate a high DC-link voltage from the low PV module voltage with a high-efficiency. A DC-link voltage controller is presented for constant DC-link voltage regulation. A half-bridge inverter is used for the single-phase DC-AC inverter for grid connection. A grid current controller is suggested to supply PV electrical power to the power grid with a unity power factor. Experimental results are obtained from a 180 W grid-connected PV module system using the proposed PCS. The proposed PCS achieves a high power efficiency of 93.0 % with an unity power factor for a 60 Hz / 120 Vrms AC power grid.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권3호
• /
• pp.306-312
• /
• 2013

Doubly fed induction generator (DFIG) systems widely used globally are highly sensitive to the grid disturbance due to the structure that the stator is connected to the grid. In the past, when a grid fault occurs in order to prevent a system, generators are separated from the grid regardless of the fault duration time. Recently, however, the grid connection standards(Grid Code)says that for the failures removed within a certain time, the generator remains operation without separating from the grid. This paper proposes a new flux tracking LVRT(Low-Voltage Ride Through) control based on system modeling equations. The validity of the proposed strategy has been demonstrated by computer simulations.

• 대한조선학회논문집
• /
• 제58권2호
• /
• pp.90-96
• /
• 2021

In this study, the method of determining the state of grid points in the adaptable surface particle method based on grid system developed as a free-surface tracing method was improved. The adaptable surface particle method is a method of determining the state of the grid point according to the shape of the free-surface and obtaining the intersection of the given free-surface and grid line where the state of the grid point changes. It is difficult to determine the state of grid points in the event of rapid flow, such as collision or separation of free-surfaces, and this study suggests a method for determining the state of current grid points using the state of surrounding grid points where the state of grid point are known. A grid layer value was assigned sequentially to a grid away from the free-surface, centering on the boundary cell where the free-surface exists, to identify the connection information that the grid was separated from the free-surface, and to determine the state of the grid point sequentially from a grid away from the free-surface to a grid close to the free-surface. To verify the improved method, a numerical analysis was made on the problem of dam break in which a sudden collision of free-surface occurred and the results were compared, and the results were relatively reasonable.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.463-466
• /
• 2005

As the distributed generation becomes more reliable and economically feasible, it is expected that a higher application of the distributed generation units would be interconnected to the existing grids. This new generation technology is linked to a large number of factors like economics and performance, safety and reliability, market regulations, environmental issues, or grid connection constrains. KEPOD (Korea Electric Power Corporation) is performing the project to develope the Distributed Micro Gas Turbine (MGT) technologies by using Swine BID-ENERGY. This paper describes the plans and strategies for the renewable energy of MGT on actual grid-connection under Korean situations. KEPOD also, has a research plan on bio-gas pretreatment system applicable to our domestic swine renewable resources and is performing concept design of pilot plant to test grid operation. In addition, this testing will be conducted in order to respond to a wide variety of needs for application and economic evaluation in the field of On-site generation.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.278-287
• /
• 2015

This paper proposes a novel voltage distortion approach for output filter design based on the voltage transfer function for both off-grid and grid-connected Pulse Width Modulation (PWM) Inverters. The method explained in detail is compared to conventional methods. A comparative analysis is performed on an example of L and LCL-filter design. Simulation and experimental results for the off-grid and the grid-connected single phase inverter prove our theoretical predictions. It was found that conventional methods define redundant values of the output filter elements. Assumptions and limitations of the proposed approach are also discussed.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제22권1호
• /
• pp.26-31
• /
• 2016

Migrim(Migration enhanced Grid Middleware)은 임베디드 단말과 다중 서버들 간의 통신 미들웨어이다. 기존의 통신 미들웨어는 단말이 서버의 자원 상태를 알지 못하기 때문에, 특정 서버에 부하가 집중될 경우에도 그 서버로 계속 요청을 보내는 문제가 있다. 또한 단말은 서버가 가진 정보를 알 수 없기 때문에, 트랜잭션 처리 결과에 대한 정확도를 보장하기 어렵다. 병목현상과 응답 정확도 문제 해결을 위해, 본 논문에서는 Migrim에 적용한 커넥션 이전과 트랜잭션 이전 기법을 제안한다. 커넥션을 다른 서버로 위임하는 과정인 커넥션 이전을 통해 전체 서버에 부하를 균등하게 분산시킬 수 있고, 트랜잭션 처리를 다른 서버로 위임하는 과정인 트랜잭션 이전을 통해 응답의 정확도를 높일 수 있다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2436-2438
• /
• 1998

The operating characteristics of a 3 kW grid-connected photovoltaic (PV) power system was studied by analying annual photovoltaic data. The system performance for grid connection was investigated using a DC/ AC inverter. The results of a demonstration test show that the system utilization rate is 15.6% and the system efficiency is 8.03%.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.364-367
• /
• 2020

본 논문에서는 OR논리게이트를 적용한 순차전압제어방식의 독립형 PV-ESS 시스템을 나타내고 있다. 저압연계방식으로 용량확대에 따른 문제점들을 가지고 있었던 기존 독립형 PV-ESS 시스템에 고압의 아날로그 방식의 순차전압제어 방식을 적용함으로써 고효율, 저가격이 가능한 독립형 PV-ESS 시스템을 제안한다. 본 논문은 기존 24V 태양광 단위 모듈의 직렬연결 확장형 고압 배터리의 출력전압 384V을 3상 DC to AC 인버터의 입력 전압으로 하여 인버터의 출력 전압과 출력 전력을 AC380V@60Hz와 10kW로 구성하였다. PSIM 시뮬레이션에 의한 이론 해석의 타당성을 입증하기 위해 실험을 통해 OR 논리 게이트를 적용한 순차전압제어시스템의 동작 특성을 확인하였다.

• 정보처리학회논문지A
• /
• 제14A권1호
• /
• pp.1-14
• /
• 2007

그리드 네트워크에서 MPI를 사용하여 지리적으로 산재된 컴퓨팅 자원을 활용하여 복잡한 문제를 해결하기 위한 MPICH-G2는 사설 IP 클러스터를 지원하지 못한다는 단점을 가지고 있다. MPICH-G2의 경우에는 모든 계산노드가 외부에 노출되어 악의적인 보안 침해의 가능성이 높아지게 된다. MPICH-GP는 NAT와 프락시를 병용하여 사설 IP 클러스터의 문제를 해결한다. 사설 IP 클러스터의 프론트 노드에 프락시를 두고, 이를 통해 내부 계산 노드로의 통신 링크를 중계한다. 따라서 사설 IP 클러스터와 공인 IP 클러스터가 혼재된 네트워크에서도 적정한 경로를 설정하고 성공적으로 MPI 작업을 수행할 수 있다. 본 논문에서는 MPICH-GP의 성능을 기존의 MPICH-G2와 비교하였다. 그리드 환경에서 MPICH-GP는 MPICH-G2의 80% 이상의 성능을 보이며, RANK 관리기법을 적용한 경우는 95% 이상의 성능을 나타낸다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.280-282
• /
• 2005

Micro-source units having power ratings in thousands of watts can provide even higher reliability and fuel efficiency than the conventional large scale units. These units are also clustered with loads creating micro-grid services to customer sites such as office buildings, industrial parks and homes. Micro-sources adopt voltage source inverter to ensure the power quality of sensitive loads. This paper deals with the connection of micro-sources into the system grid. Modeling and simulation of the grid connected micro-sources at the power frequency range are investigated. Simulation results show that the micro-grid system with two micro-sources has good dynamic characteristics.