• 제목/요약/키워드: green mold

검색결과 142건 처리시간 0.023초

Sapstain and Mold Control on Radiata Pine Lumber: Laboratory and Field Tests of Selected Fungicides

  • Kim, Jae-Jin;Ra, Jong-Bum;Kim, Hyung-Jun;Kim, Gyu-Hyeok
    • Mycobiology
    • /
    • 제30권1호
    • /
    • pp.37-40
    • /
    • 2002
  • The susceptibility of radiata pine sapwood to fungal attack and the ability of selected fungicides to control colonization of sapstain and mold fungi on green radiata pine sapwood were evaluated. Radiata pine sapwood was highly susceptible to fungal staining, suggesting that prompt application of fungicides after sawing is essential for preventing fungal colonization. The ability of commercial fungicides to prevent fungal discoloration on radiata pine sapwood was assessed using an accelerated 6-week test on small samples in the laboratory, and in field tests using bulk-piled boards exposed outdoors for 6 weeks during summer rainy season. In laboratory tests, Hylite extra provided excellent protection against fungal discoloration even at the lowest concentrations. Hylite clear, Britewood S, and NP-1 Plus provided good short-term protection(2 to 4 weeks), but higher chemical loadings were, required for long-term protection(6 weeks). Woodguard produced little or no protection over the test periods. In field tests, Kathon 893 provided markedly superior protection at the concentration of 0.5 percent or higher. NP-1 Plus provided relatively good protection at all concentrations evaluated. Hylite extra was effective only for short-term protection(2 to 4 weeks) at all concentrations tested, but higher solution strengths were needed for longterm protection.

마이크로 PMMA몰드를 이용한 1-3 PZT Composite제조 (Preparation of 1-3 PZT Composites Fabricated Using Micro PMMA Mold)

  • 박준식;조진우;정석원;박순섭;이선호;김동현;한진호
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제50권6호
    • /
    • pp.271-275
    • /
    • 2001
  • We investigated preparation of 1-3 PZT composites for medical ultrasonic transducer array (briefly UTA) using micro pressing method. The proposed process was using pressing PZT green sheet by PMMA micro mold obtained from X-ray lithography. Microstructures, electriacl and electro-mechanical properties of fabricated composites were analyzed. Dielectric constant at 1kHz and thickness mode electro-mechanical coupling coefficient of $6.2mm{\times}6.2mm{\times}422{\mu}m$ UTA sample were 1754 and 51%, respectively. Microstructures of sintered PZT showed dense and uniform. And PZT phases were well crystallized. Micro pressing method is a mass productive process in case of using injection molded PMMA by batch type LIGA process.

  • PDF

작약 촉성재배 시기가 절화와 뿌리품질 및 수량에 미치는 영향 (Influence of Forcing Cultivation Time on Cut Flower, Root Quality, and Yield in Peony (Paeonia lactiflora Pall. cv. Taebaek))

  • 배수곤;김주환;박상조;김재철
    • 한국약용작물학회지
    • /
    • 제16권6호
    • /
    • pp.421-426
    • /
    • 2008
  • Three year-old peony (Paeonia. lactiflora Pall. cv. Taebaek) was cultivated in green-house at Jan. 15, Feb. 15, or Mar. 15, respectively. The mean of temperature during the forcing cultivation was higher (air; $1.0{\sim}11.1^{\circ}C$, soil; $1.1{\sim}7.4^{\circ}C$) than that of open-field condition. From sprouting to flowering in peony cultivated at Jan. 15 was about 54 days, which is shorted the cut flower periods (ca. 26 days) compared with the open-field cultivation. However, earlier forcing cultivars were very susceptible to pathogens such as powdery mildew or gray mold. The yield in green house was also lower than in the open-field cultivation. The content of bioactive compounds such as paeoniflorin and albiflorin in green-house cultivars was similar that of open-field cultivars. These results showed the forcing cultivation time of peony at Feb. 15 in green-house was most desirable for commercialization.

감귤저장병 병원균 Penicillium digitatum 방제를 위한 길항 내생세균 Bacillus velezensis CB3의 분리 및 특성 규명 (Isolation and Characterization of an Antagonistic Endophytic Bacterium Bacillus velezensis CB3 the Control of Citrus Green Mold Pathogen Penicillium digitatum)

  • 이지현;서문원;김홍기
    • 한국균학회지
    • /
    • 제40권2호
    • /
    • pp.118-123
    • /
    • 2012
  • 대표적인 감귤 녹색곰팡이병(Penicillium digitatum) 방제용 생물농약을 개발하고자 제주도내 7개 과수원으로부터 채집된 citrus 잎에서 21균주의 내생세균을 분리하였다. 그 중 5개의 세균이 녹색곰팡이병균 P. digitatum에 항균활성을 나타냈으며, 대치배양에서 가장 강력한 항균활성을 보인 CB3 균주가 선발되었다. CB3 균주는 간상형의 그람 양성세균으로 생리 생화학적 특성과 gyrA 유전자 염기서열 분석에 의해 Bacillus velezensis로 동정되었다. CB3 균주는 감귤 저장병 병원균 Penicillium digitatum에 강력한 항균활성을 나타내었다. $1{\times}10^5$ spores/ml에 이르는 고농도의 P. digitatum을 감귤에 상처접종했을 때에도, $1{\times}10^8$ cfu/ml의 CB3에 의한 방제효과는 66.7%로 매우 높았다. 본 연구결과, Bacillus velezensis CB3의 안정성과 강한 방제활성 등을 고려할 때 유용 친환경적 방제제로서 매우 가치가 있을 것으로 판단된다.

국내 주요 버섯류의 병해 발생과 재배사의 미생물 밀도 조사 (Occurrences of Major Mushroom Diseases and Microbial Densities of Mushroom Cultivation Facilities)

  • 안유나;장보라;김면수;원항연;전창성;천세철
    • 한국균학회지
    • /
    • 제37권2호
    • /
    • pp.144-149
    • /
    • 2009
  • The occurrences of the major diseases and the densities of air-born microbes were surveyed in the cultivation facilities for oyster mushroom (Pleurotus ostreatus), king oyster mushroom (Pleurotus eryngii), and enoki mushroom (Flammulina velutipes) in different areas of Korea. Green mold disease was most often developed in oyster mushroom bed cultivation with the disease incidence rate of approximate 10% while the disease incidences from bottle and plastic envelop cultivation were less than 1~2%. In the bed cultivation, the major air-born microbes in the growth room were Aspergillus, Penicillium, Trichoderma, and Curvularia with the total fungal population density of 567~1,297 CFU/$m^3$ . However, only Trichoderma and Penicillium were detected in the growth rooms and innoculation rooms of bottle and plastic envelop cultivation with the densities of 350~700 CFU/$m^3$ and 160~260 CFU/$m^3$, respectively. The bacterial diseases become evident in the growth rooms of bottle and plastic envelop cultivation with the approximate incidence rate of 10%. The identified bacterial species were Brevibacillus levelkil, Rhizobium radiobacter, Brevundimonas vesicularis, Pseudomonas mosselii, Microbacterium testaceum. Sphingomonas panmi, Sphingomonas yabuuchiae, Paracocus dinitrificans, Curtobacterium flaccumfaciens pv. flaccumfaciens and some unidentified bacteria with the densities of 40~6,359 CFU/$m^3$ in the growth rooms and 9 CFU/$m^3$ in the inoculation room. This study indicated that the green mold disease by fungal strains was the major mushroom disease in the bed cultivation and suggested that the contamination of bacteria and fungi together in the growth media could result in severe production loss. The plastic envelope and bottle cultivation were evidenced to be less susceptible to such contaminations.

Botrytis cinerea에 의한 완두 잿빛곰팡이병 (Gray Mold of Pisum sativum Caused by Botrytis cinerea in Korea)

  • 권진혁;박창석
    • 한국균학회지
    • /
    • 제32권1호
    • /
    • pp.50-53
    • /
    • 2004
  • 2003년 3월 경남 남해군 창선면 비닐하우스 및 노지재배 완두포장에서 Botrytis cinerea에 의한 완두 잿빛곰팡이병이 발생하였다. 병징은 잎, 줄기 및 꼬투리에 발생하여 병든 부분이 수침상으로 물러지고 썩으면서 병반부위에 잿빛곰팡이가 많이 생기고, 심할 경우 감염된 부위는 결국 말라죽는다. 분생포자는 무색, 단포이며 난형 또는 타원형으로 크기는 $8{\sim}17{\times}5{\sim}13\;{\mu}m$였고, 분생자경 위에 분생포자가 아주 많이 형성되었다. 분생자경은 갈색으로 격막이 있고, 폭은 $14{\sim}30\;{\mu}m$였다. 균사생육과 균핵형성 적온은 $20^{\circ}C$였다. 병반에서 분리한 병원균은 Botrytis cinerea에 의한 완두 잿빛곰팡이병으로 동정되었다.

Pseudocercospora fuligena에 의한 토마토 검은잎곰팡이병 (Black Leaf Mold of Tomato Caused by Pseudocercospora fuligena in Korea)

  • 이문행;이석수;김홍기;이윤수;이지혜;유승헌
    • 식물병연구
    • /
    • 제18권3호
    • /
    • pp.255-258
    • /
    • 2012
  • 2011년 9월, 충남 보령시와 부여군의 시설재배단지에서 재배중인 토마토의 잎에 Pseudocercospora fuligena에 의한 검은잎곰팡이병이 발생하였다. 이 병의 병징은 초기에는 잎에 연한 노란색의 불규칙한 점무늬가 발생하며, 점차 연한 갈색으로 변하고 잎 뒷면의 병반부위에 병원균의 분생포자를 다량으로 형성하면서 검은색의 그을음 병징을 나타내었다. 병든 토마토 식물체로부터 원인균을 분리하였고 현미경 검경을 통하여 형태적 특징을 분석한 결과 P. fuligena로 동정되었다. 온실조건에서 인공접종을 통하여 이 균의 병원성을 증명하였다. P. fuligena에 의한 토마토 검은잎곰팡이병의 발생은 우리나라에서 최초의 보고이다.

전통누룩 제조에 대한 문헌고찰 (The Biblographical Study on the Processing Methods of Traditional Nuruk)

  • 이미경;이성우;배상만
    • 동아시아식생활학회지
    • /
    • 제1권3호
    • /
    • pp.277-298
    • /
    • 1991
  • Review of Korean and Chinese traditional nuruk was performed on the longitudinal change of ingredients and method of each nuruk. Manufacturing process of common nuruk was that flour, wheat chaff, grinded green pea and smartweed were doughed, footpressed to make 凹 type, covered it with mugwort, lotus leaf and cocklebur leaf and suspended it with string for 60 days to get wild mold. This is named Beungkuk. Manufacturing process of Sankuk was that cooked rice or uncooked rice grain was scattered, mixed often for 30 days. Ryokuk and Hongkuk are called Sankuk.

  • PDF

닥터블레이드법에 의한 PLZT계 경사기능 압전 엑튜에이터의 제조와 압전 변위 특성 (Fabrication and Piezoelectric Strain Characteristics of PLZT Functionally Gradient Piezoelectric Actuator by Doctor Blade Process)

  • 김한수;최승철;이전국;정형진
    • 한국세라믹학회지
    • /
    • 제29권9호
    • /
    • pp.695-704
    • /
    • 1992
  • In (Pb, La)(Zr, Ti)O3 ceramic system, the functionally gradient material (FGM) was developed, and its processing and properties were investigated. The FGMs were successfully prepared through doctor blade method with acrylic binder system as well as mold stacking press method. The ultrasonic treatment was very effective for particle dispersion in slurry, and it lead to form clack-free green films. The strain-voltage characteristics of the FGM system was significantly improved which fabricated between a high piezoelectric-low dielectric and a low piezoelectric-high dielectric composition layer.

  • PDF

Alternative Finishing Process for Poly(ethylene terephthalate)(PET) Tire Cord using Atmospheric Plasma

  • Kim, Sam-Soo;Song, Eun-Young;Cho, Dong-Lyun;Park, Jun;Park, Sung-Ho;Lee, Jae-Woong
    • 한국염색가공학회지
    • /
    • 제22권4호
    • /
    • pp.300-305
    • /
    • 2010
  • Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.