• Journal of the Semiconductor & Display Technology
• /
• v.23 no.1
• /
• pp.12-18
• /
• 2024

The accelerated pace of climate crisis due to continuous industrialization and greenhouse gas emissions necessitates sustainable solutions that simultaneously address mitigation and adaptation to climate change. Naturebased Solutions (NbS) have gained prominence as viable approaches, with Green Infrastructure being a representative NbS. Green Infrastructure involves securing green spaces within urban areas, providing diverse climate adaptation functions such as removal of various air pollutants, carbon sequestration, and isolation. The proliferation of Green Infrastructure is influenced by the quantification of improvement effects related to various projects. To support decision-making by assessing the climate vulnerability of Green Infrastructure, the U.S. Department of Agriculture (USDA) has developed i-Tree Tools. This study proposes a comprehensive evaluation approach for climate change adaptation types by quantifying the climate adaptation performance of urban Green Infrastructure. Using i-Tree Canopy, the analysis focuses on five urban green spaces covering more than 30 hectares, considering the tree ratio relative to the total area. The evaluation encompasses aspects of thermal environment, aquatic environment, and atmospheric environment to assess the overall eco-friendliness in terms of climate change adaptation. The results indicate that an increase in the tree ratio correlates with improved eco-friendliness in terms of thermal, aquatic, and atmospheric environments. In particular, it is necessary to prioritize consideration of the water environment sector in order to realize climate change adaptive green infrastructure, such as increasing green space in urban areas, as it has been confirmed that four out of five target sites are specialized in improving the water environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.4
• /
• pp.518-524
• /
• 1995

In this study physicochemical characteristics such as crude lipid, crude protein and total sugar contents have been analyzed with samples taken at different developing stages and growing sites, Bongsan-ri(steam-roasted green tea) and Buchun-ri(roasted green tea) area. Leaf area of new leaf was larger in Buchun-ri(7.23cm$^2$) than in Bongsan-ri(6.93cm$^2$). Variation of leaf area by the developing stages was the largest at between stage II (May 5) and stage III(May 18). Dry matters ratio of tea leaf were 26.3% in Bongsan-ri and 26.6% in Buchun-ri. Water content, ash, water-soluble matters, total sugar content of green tea sampled in Bongsan-ri and Buchun-ri were 5.6, 6.1, 33.1, 4.6 and 6.2, 5.8, 35.2, 2.8%, respectivley. Crude lipid, total nitrogen and water-soluble protein, inorganic matters content of green tea sampled in Bongsan-ri and Buchun-ri were 2.8, 5.1, 1.1, 2.56 and 2.2, 5.7, 1.0, 2.34%, respectively. At the later developing stages crude lipid, total sugar contents were increased, whereas total nitrogen had low content. Vitamin C, Vitamin E and Vitamin A content of green tea produced in Bongsan-ri and Buchun-ri area were 413mg%, 71.8mg%, 32.15IU and 311mg%, 52.3mg%, 25.68IU, respectively. Vitamin C and Vitamin E content were increased toward the later sampling stages. Water-soluble matters and water-soluble protein content of green tea prepared by the steam-roasted method and the roasted method were increased by 0.11, 0.13 and 0.09, 0.08%, respectively, compared to unroasted check. Crude lipid content of green tea prepared by the steam-roasted method and the roasted method were decreased by 0.13 and 0.24%, respectively. Total nitrogen content of green tea prepared by the steam-roasted method and the roasted method was changed 0.019 and 0.036%, respectively and total nitrogen content showed minute different between two methods.

• Journal of computational fluids engineering
• /
• v.20 no.2
• /
• pp.96-102
• /
• 2015

In this study, the green water phenomena on rectangular shaped structure is numerically simulated by STAR-CCM+ to investigate the flow pattern including the velocity profiles in bubbly water flow. 5 phases of the formation of green water in front of and over the rectangular shaped structure is simulated at the design condition which is scaled down by 1:125 from FPSO operating in GOM. All numerical results are compared with the experimental results performed in a two dimensional wave flume. The water deformation due to the green water are obtained by the high speed CCD camera with employing the shadow graphy technique, which is allowed to take the bubbly water flow into images. A series of image taken by shadow graphy technique is analyzed with MQD method to calculate the velocity in bubbly water flow.

• Journal of the Korean Ceramic Society
• /
• v.46 no.6
• /
• pp.627-632
• /
• 2009

Formaldehyde emissions from the construct was harmful to human. Diatomite, bentonite and zeolite were used as porous materials for fabricating panels. Formaldehyde adsorption and physical characteristics of porous materials were investigated and hydrothermal method was applied to fabricate panels. Formaldehyde adsorption contents of panels with porous materials were higher than that of panel without porous materials. The panels with Cheolwon diatomite and Pohang zeolite showed excellent characteristics of Formaldehyde adsorption. These characteristics were caused by higher surface area and pore volume of porous materials. Formaldehyde adsorption contents were influenced by surface area and pore volume of panels. Correlation coefficient between surface area and Formaldehyde adsorption content of panels was 0.87. The panels with porous materials had higher strength than that without porous materials because of bridging role particles.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.327-332
• /
• 2015

A large amount of dye wastewater poses a threat to environmental safety. Disperse blue, an anthraquinone dye that is widely used in textile dyes, is difficult to degrade in wastewater. In this work, one fungus was screened according to the decolorization rate of disperse blue. The fungus was identified and named Aspergillus XJ-2 on the basis of its morphological characteristics and 18s rDNA. Response surface method was used to optimize culture conditions for A. XJ-2. The optimum values of obtained responses were as follows: temperature, $35^{\circ}C$; pH, 5.2; carbon-to-nitrogen ratio, 30:5.5; and rotation ratio, $175r{\cdot}min^{-1}$. Under optimized conditions, the decolorization rate of A. XJ-2 was up to 94.8% in 48 h.

• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.936-941
• /
• 2005

Green tea was extracted with different solvents such as hot water, varying concentrations of ethanol and carbon dioxide fluid. The carbon dioxide fluid extraction of green tea was a very effective extraction method in terms of antioxidant yield and stability. At pressure of 125kgf, antioxidant extract of green tea produced a yield 1.87 and 2.8 times higher than hot water and $95\%$ ethanol extract, respectively. Antioxidant extract of carbon dioxide fluid was also very stable during 7-day storage at 35?.

• Current Photovoltaic Research
• /
• v.11 no.3
• /
• pp.75-78
• /
• 2023

Recently, the installation of photovoltaic modules in urban areas has been increasing. In particular, the demand for solar modules installed in a limited space is increasing. However, since the crystalline silicon solar module's size is proportional to the solar cell's size, it is difficult to manufacture a module that can be installed in a limited area. In this study, we fabricated a solar module with a shingled design that can control horizontal and vertical width using a bi-directional laser scribing method. We fabricated a string cell with a width of 1/5 compared to the existing shingled design string cells using a bi-directional laser scribing method, and we fabricated a solar module by connecting three strings in parallel. Finally, we achieved a conversion power of 5.521 W at a 103 mm × 320 mm area.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.135.2-135.2
• /
• 2011

The goal of this study is the derivation of priority for business in the areas of green energy technologies. In this paper, we calculated the importance weights of impact factors using the AHP (Analytic Hierarchy Process) method in order to derivation of priority to the green energy technologies business. AHP is a useful method for evaluating multi-criteria decision making problems. To apply the AHP method, specialists for the assessment have been identified by using the concept of 'plan, do, see' and the decision-making hierarchy was established. We selected 5 criteria and 16 sub-criteria for impact factors by brainstorming. According to the result in this study, the most important impact factor is the possibility of commercialization, the second is the possibility of developing the fundamental technology, and the third is the possibility of convergence technology.

• Environmental Engineering Research
• /
• v.17 no.3
• /
• pp.151-156
• /
• 2012

This research described the magnetic method for the rapid removal of green algae in water. We modified the pH, cation concentration, and magnetic powder concentration to discover the best removal performance. In order to rapidly remove green algae from water, we added magnetic powder and chitosan into algae water to make a magnetic substance and this was extracted by a strong neodymium magnet. The optimized conditions were pH of 6.5-7.5, chitosan concentration of 10 mg/L, and magnetite powder concentration of less than 0.05%. A higher removing rate was observed when a higher amount of magnetite or chitosan was used, but the total amounts of phosphorus or nitrogen were not decreased.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.4
• /
• pp.1600-1604
• /
• 2017

A new Complex Image Method based on Genetic Algorithm (GA) is proposed to calculate the Green's functions of CPW (coplanar waveguide)-type microwave components and antennas. The closed-forms of the spectral-domain integrals are obtained by the GA, avoiding the conventional procedures of the tedious linear algebra and the sampling conditions sensitive to the complex-variable sampling paths adopted in the Prony's and GPOF methods. The proposed method is compared with the numerical Sommerfeld Integral, which results in good agreement.