• 제목/요약/키워드: green lamination

검색결과 28건 처리시간 0.025초

카본을 첨가한 LTCC 그린 시트에서 UV 레이저를 이용한 미세 홀 터짐 현상 제어 (Control of Explosion Behavior in Micro Hole Using UV Laser on LTCC Green Sheets Containing Carbon Particles)

  • 김시연;안익준;여동훈;신효순;윤호규
    • 한국전기전자재료학회논문지
    • /
    • 제29권12호
    • /
    • pp.786-790
    • /
    • 2016
  • Hole explosion behaviors were observed during drilling fine holes with laser beam on the LTCC green bar of $320{\mu}m$ thick after lamination of green sheets prepared by tape casting of thick film process. The incidence of these hole explosions was inversely proportional to hole sizes. The incidence of hole explosion was 20 % number of hole with the size of $60{\mu}m$ exploded for the UV radiation, while the explosion did not appear for hole sizes over $100{\mu}m$. To prevent hole explosion behavior during laser-drilling of fine holes, carbon black powder was added as an additive in the LTCC composition, which has superior thermal durability. As a consequence, hole explosion rate was suppressed to 0.8 % for the hole size of $50{\mu}m$ green sheet with the carbon black amount of 10 weight % and the laser power of 3 watt. Added carbon is thought to reduce the heat-affected region during laser drilling.

PMN-PZT 세라믹 액츄에이터의 열화 및 파괴 거동 (Aging and destruction of PMN-PZT Multilayer Ceramic Actuators)

  • 고중혁;정수종;하문수;이동만;송재성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 C
    • /
    • pp.1424-1426
    • /
    • 2003
  • PMN-PZT 적충형 세라믹 액츄에이터 소자를 제작한후 그 열화 특성을 조사하였다. 액츄에이터는 tape casting 방법으로 green sheet를 제작한후, screen printing방법을 이용하여 전극형상을 만들고, lamination과 cutting공정을 통하여 소자를 제작하였다. 작된 소자의 구조적인 특성을 분석하기 위하여 X-ray diffractometer를 사용하였으며, Doppler effect를 사용하는 laser vibrometer를 이용하여 전압에 따른 변위량을 측정하였다. 제작된 소자의 열화 특성을 알아보기 위하여 60 Hz의 triangular 교류 파형을 적충형 세라믹 액츄에이터에 인가하여 열화전과 후의 P-E hysteresis loop의 변화를 살펴보았으며, unipolar AC 전압을 지속적으로 인가하여 소자를 depling 시킴으로써 열화현상을 관찰하였다. 파단면에 대한 SEM 분석을 통하여 소자의 파괴 메카니즘을 알아 보도록 하였다. 이로부터 전기적, 기계적 열화가 소자의 동작에 미치는 영향에 대해서 알아 보았다.

  • PDF

강활(羌活)의 형태(形態) 감별에 관한 연구 (A Study on a Morphological Identification of Ostericum Root)

  • 김성흠;길기정;이영종
    • 대한본초학회지
    • /
    • 제21권2호
    • /
    • pp.181-188
    • /
    • 2006
  • Objectives : Southern, northern, and wild types of Osterici Radix, and Notopterigii Rhizoma et Radix imported from China are circulated in Korea. Morphological identification was attempted by comparing external and internal forms of these materials. Methods : The slice of the tested material made by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by olymphus-BHT. Results : 1. Southern type of Osterici Radix has short rhizome and many small and long roots, while northern type of it is mostly composed of rhizomes with little small reds and sometimes looks like bamboo because of the extention of the parts between joints. 2. Parenchymal cell of southern type of Osterici Radix is filled with starch grain, while that of nothern type includes less starch grain with lamination crossed on its cell wall. 3. Surface of root and rhizome of wild Osterici Radix has some marks of fibrous root raised in the form of nodule, but cultivated Osterici Radix does not have this kind of marks. 4. Notopterigii Rhizoma et Radix is mostly composed of rhizomes, and its form is similar to that of a silkworm or joints of bamboo. Parenchymal cell is filled with starch grains, and lamination is crossed on its cell wall but not salient. Conclusion : Southern, northern, and wild types of Osterici Radix, and Notopterigii Rhizoma et Radix circulated in Korea can be easily identified because of their differences in their external and internal forms.

  • PDF

수계 바인더를 이용한 NiCuZn Ferrite의 슬러리 제조 (The Preparation of NiCuZn Ferrite Slurry Using the Water Mixed Binder System)

  • 류병환;이정민;고재천
    • 자원리싸이클링
    • /
    • 제7권4호
    • /
    • pp.35-42
    • /
    • 1998
  • 오늘날 전자부품 산업에 실장기술은 크게 각광을 받고 있다. 페라이트 칩인덕터와 같이 전자부품의 소형화를 위해서는, 쉬트 적층법이나 스크린 인쇄법 등을 위하여 유기용매를 사용하는 세라믹 습식공정이 널리 사용되고 있다. 본연구에서는 물이 혼합된 용매계를 이용한 NiCuZn Ferrite(NCZF) 슬러리와 그린쉬트의 제조 및 평가에 관한 연구를 하였다. 볼밀링에 의하여 21 vol%의 NCZF 슬러리를 제조하였으며, polacrylic vinyl copolymer를 바인더로서 사용하였다. 용매로서는 isopropyl alcohol과 2-butoxy ethanol에 40∼80% 물을 혼합하여 사용하였다. 그 결과, NCZF 슬러리의 분산안정성은 입자의 정전기적 힘보다는 free polymer에 의해 나타났으며, 슬러리의 점성은 용매중의 물함량에 크게 의존하였다.

  • PDF

Carbonate Coatings on Plant Twigs Found from a Travertine-Depositing Small Stream, Dijon, France

  • Lee, Seong-Joo;Kong, Dal-Yong;Golubic, Stjepko
    • 한국지구과학회지
    • /
    • 제35권5호
    • /
    • pp.305-312
    • /
    • 2014
  • A number of coated grains (spherical to elongated ones in shape) were collected from a small stream, Dijon, France. They were characterized by typical concentric lamination surrounding broken twigs, and were thus identified as concentric precipitation on plant twigs. Within carbonate coatings of the plant twigs, two morphological groups including, eukaryotic green algae (Vaucheria sp.) and cyanobacteria (Scytonema sp. and Rivularia sp.) were detected, which form carbonate crystals that are surrounding their filaments. The filaments could have triggered carbonate precipitation by photosynthetic removal of $CO_2$ causing the increase of alkalinity of the water, and by supporting their sheaths as nucleation sites. Such encrusted twigs were found from 70 meters downstream, in which temperature and pH were measured as $11.1^{\circ}C$ and 8.18, respectively. These water chemistries ($11.1^{\circ}C$ and pH 8.18), with the aid of microbial photosynthesis, were likely to provide a suitable condition for carbonate precipitation on the twigs.

4.1' Flexible Organic Light Emitting Diodes Driven by Organic Thin-Film Transistors

  • Hu, Tarng-Shiang;Wang, Yi-Kai;Lin, Tsung-Hsien;Yan, Jing-Yi;Lee, Tzu-Wei;Yu, Chien-Hsien;Wen, Jiing-Fa;Kao, Chi-Jen;Chen, Liang-Hsiang;Shen, Yu-Yuan;Yeh, Shu-Tang;Tseng, Mei-Rurng;Wu, Po-Sheng;Ho, Jia-Chong;Lee, Cheng-Chung
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
    • /
    • pp.314-316
    • /
    • 2006
  • In this paper, the plastic organic thin-film transistors (OTFTs) with $32{\ast}32$ array are presented. Flexible organic light emitting diodes (OLEDs) operated by OTFTs are fabricated with a novel lamination method and the results are also presented. OTFT pixels defined by photolithography, and pentacene deposited by thermal evaporation. Fabrication method and the performances of green PHOLEDs with high efficiency, stability, and electrical performance are discussed.

  • PDF

발생 중인 포유류 망막으로 골수기질세포의 이식 (Transplantation of Marrow Stromal Cells into the Developing Mammal Retina)

  • 이은실;권오주;예은아;전창진
    • 한국안광학회지
    • /
    • 제18권4호
    • /
    • pp.541-548
    • /
    • 2013
  • 목적: 골수기질세포는 생체 내 외에서 신경세포와 신경교세포로 교차분화 할 수 있는 능력을 가지고 있는 것으로 밝혀져 있다. 발생 중인 숙주 환경에 따라 이식된 골수기질세포의 생존여부, 형태학적 그리고 분자적 분화영향을 조사하기 위해 브라질산 주머니쥐 안구에 마우스 골수기질세포를 이식하였다. 방법: GFP를 발현하는 골수기질세포를 발생 중인 브라질산 주머니쥐의 각 시기별로 이식하여, 이식 후 최대 4주까지 생존시킨 후 각 시기별로 면역조직화학법을 시행하였다. 결과: 이식한 골수기질세포의 일부는 숙주동물의 유리체 내에서 생존하며 일부 돌기를 내는 신경세포로 형태학적 분화가 됨을 관찰할 수 있었다. 또한 유리체에 존재하는 일부 세포는 신경세포 표지인자인 TuJ1(class III ${\beta}$-tubulin), 신경교세포 표지인자인 GFAP(glial fibrillary acidic protein), 또는 신경줄기세포 표지인자인 Nestin 단백질을 발현하였다. 게다가, 일부 골수기질세포는 신경절세포층으로 이동함을 관찰했으나, 이동한 세포들은 형태학적 또는 분자적 분화를 나타내지는 않았다. 결론: 이번 연구에서 가장 효율적인 이식시기는 생후 16일째의 포유류 망막으로, 이는 망막세포의 분화양상과 층분화 패턴으로 미뤄볼 때 생후 4~5일 정도의 마우스 망막과 발생학적으로 상동함을 알 수 있었다. 또한 이식 받은 숙주 망막의 미세환경이 이식된 세포운명에 영향을 미치는 것을 확인할 수 있었다.

경상남도 사천시 진주층에서 산출되는 막대기형 스트로마톨라이트 (Rod-shaped Stromatolites from the Jinju Formation, Sacheon, Gyeongsangnam-do, Korea)

  • 최종걸
    • 한국지구과학회지
    • /
    • 제28권1호
    • /
    • pp.54-63
    • /
    • 2007
  • 경상남도 사천시의 백악기 육성퇴적층인 진주층에서는 다양한 종류(막대기형, 멍울형, 층형, 작은 기둥형)의 스트로마톨라이트(stromatolite)가 산출된다. 세계적 산출 경향과는 달리 막대기형 스트로마톨라이트가 대량으로 발견되었다. 이는 나뭇가지에 부착 서식하던 미세조류에 의하여 탄산염 광물이 침전하여 동심원 모앙의 엽층리를 형성하여 생성된 구조이다. EPMA를 이용하여 구성광물, 속성작용, 풍화과정의 진행을 확인했다 일반적인 스트로마톨라이트는 내지성 화석이지만 막대기형 스트로마톨라이트는 외지성 화석으로도 산출될 수 있다는 점에서 특이하다. 전형적인 스트로마톨라이트의 미세 엽층리는 막대기의 포위 부분에 있으며, 여기서 최소 두 종류의 사상체 남조세균(평균 $2.2{\mu}m$$7.8{\mu}m$ 녹조류(평균 $32.3{\mu}m$ 발견하였으며, 이 때 남조세균은 피막 건설자이고, 녹조류는 피막 보조자로 판단되었다. 일부 박테리아에서는 세포사를 발견할 수 있었다.