• Journal of Environmental Impact Assessment
• /
• v.18 no.4
• /
• pp.195-208
• /
• 2009

The power plant is well known to influence air pollution as well as emission of green house gas. Because of increasing demand on electricity, the government set up the electric support action plan every 2 years. In this research, the impacts of power plants on the environment and region was studied. The study was focused on the establishment of power plant in Incheon area based on the 3rd electric support action plan. According to the 3rd electric support action plan, almost 80% of power plant in metropolitan area is planned to be built in Incheon area. The main influences of establishment of power plant are emissions of $SO_x$, $NO_x$ and PM and exceed the allocated local industry emissions, which means the emission allocation of other industry is difficult. In additions, the power plant exhaust $CO_2$ much more than other types of fuel such as waterpower generation, atomic power station. Although several supports are given in local government, these cannot cover the whole cost due to establishment of power plant. Subsequently, this study suggest the additional policy based on local consideration is needed and the current electricity distribution system should be reconsidered fundamentally in the lang term.

• Korean Journal of Environmental Agriculture
• /
• v.38 no.4
• /
• pp.245-253
• /
• 2019

BACKGROUND: Weathering of bottom ash (BA) might induce change of its surface texture and pH and affect physical and chemical properties of soil associated with greenhouse gas emission, when it is applied to the arable soil. This study was conducted to determine effect of weathering of BA in mitigating emission of greenhouse gases from upland soil. METHODS AND RESULTS: In a field experiment, methane (CH₄), carbon dioxide (CO₂), and nitrous oxide (N₂O) emitted from the soil was periodically monitored using closed chamber. Three month-weathered BA and non-weathered BA were applied to an upland soil at the rates of 0, 200 Mg ha^-1. Maize (Zea mays L.) was grown from July 1_st to Oct 8_th in 2018. Both BAs did not affect cumulative CH₄ emission. Cumulative CO₂ emission were 23.1, 19.8, and 18.8 Mg/ha/100days and cumulative N₂O emission were 35.8, 20.9, and 17.7 kg/ha/100days for the control, non-weathered BA, and weathered BA, respectively. Weathering of BA did not decrease emission of greenhouse gases significantly, compared to the weathered BA in this study. In addition, both BAs did not decrease biomass yields of maize. CONCLUSION: BA might be a good soil amendment to mitigate emissions of CO₂ and N₂O from arable soil without adverse effect on crop productivity.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.4
• /
• pp.291-296
• /
• 2014

For the purpose of energy consumption and green-house gas reduction from building, new insulation materials with improved thermal property have been developed and used. Among new insulation materials, mineral hydrate which compensates for the defects of existing materials is using as a prominent insulation material. The fabrication method of mineral hydrate is similar to that of ALC for building structure but mineral hydrate is only used for insulation. The raw materials that make up of mineral hydrate are cement, lime and anhydrite. Especially anhydrite is all dependant on imports. In this study, Desulfurization Gypsum(DG), by-product of oil plant, was used for replacing for imported anhydrite and waste recycling. DG substituted all of anhydrite and a part of lime. Mineral hydrate used DG had analogous thermal and physical properties, compared to existing mineral hydrate.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.133-136
• /
• 2008

In order to decrease carbon dioxide, one of the green house gas, poly(styrene carbonate) has been synthesized from carbon dioxide and styrene oxide with zinc glutarate as a catalyst. The polymer has been identified as an alternating copolymer by spectroscopic analysis, FT-IR, $^1H$-NMR, and $^{13}C$-NMR. The number average molecular weight ($M_n$) of the polymer is $5.0{\times}10^4g/mol$ and the glass transition temperature ($T_g$) is $88^{\circ}C$ and its melting point ($T_m$) is $240^{\circ}C$. The cyclic carbonate, styrene carbonate, has been obtained by thermal degradation of the polymer via the unzipping mechanism.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.5
• /
• pp.120-125
• /
• 2007

Burning the fossil fuel in the thermal power plants causes green house gas emission. Monitoring of CO2 emission of the thermal power plants is growing more important because the amount produced by them is more than 20 percent of national total emission. This paper proposes a method to calculate the amount of the CO2 emission w.r.t. generator[MW] output using the input-output coefficients of the thermal power plants. The power flow computation together with the CO2 emission calculation are demonstrated in a sample power system.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.2
• /
• pp.121-125
• /
• 2010

Carbon Capture and Storage (CCS) technology mitigates the emission amount of carbon dioxide into the atmosphere and can reduce green house effect which causes the climate change. Deep saline aquifer or obsolete oil/gas storage etc. in the marine geological structure are considered as the candidates for the storage. The injection and storage relating technology have been interested in the global society, however the adverse effect caused by leakage from the system failure. Even the safety level of the CCS is very high and there is almost no possibility to leak but, still the risk to marine ecosystem of the high concentrated carbon dioxide exposure is not verified. The present study introduces the system and environmental risk assessment methods. The feature, event and process approach can be a good starting point and we found the some possibility from the fault tree analysis for evaluation. From the FEP analysis, we drove the possible scenario which we need to concentrate on the construction and operation stages.

• Environmental and Resource Economics Review
• /
• v.23 no.3
• /
• pp.365-408
• /
• 2014

The purpose of this paper is to compare efficiencies, two stage efficiencies, and the reduction of economic growth due to the restraint of $CO_2$ and fossil fuel in two efficiency approach by pointing out the limit of traditional efficiency approach and introducing material balance approach. The efficiencies under the traditional approach and the material balance approach report significant gaps when they are analyzed in detail. Especially, in case not including fossil fuels, the low income countries show the bad performance of production efficiencies, but OECD and high-middle income countries reveal the better performance than that of the low countries. It fails to reflect the reality justly. Based on the material balance approach, the low income countries report the higher performance and the alleviated effect of environmental components for economic growth than OECD's.

• Environmental and Resource Economics Review
• /
• v.16 no.4
• /
• pp.923-946
• /
• 2007

The goal of this study is to analyse the effects of financial support by governmental on KERRP (Korea Emission Reduction Registration Project) in the case of descending clock auction. Result shows that about 60% of total reduction (612,000ton) can be achieved at the price of 8,000 Won/ton with the budget amount of 5 billion Won, if the benefit from energy saving by the project is not included. Also 100% of total reduction (1,015,713ton) can be achieved at the price of 4,900Won/ton, if the benefit from energy saving by the project is included. Because most projects get some benefits from the energy saving occurred by project performance, the financial support by government may not be needed. However, this type of support would be meaningful from the aspect of encouraging GHG (Green House Gas) reduction to be prepared for the potential obligation of national GHG reduction from 2013.

• Applied Chemistry for Engineering
• /
• v.3 no.1
• /
• pp.1-6
• /
• 1992

In this energy and environment conscious age, methanol has come to attention increasingly since the well established process is commercially available to produce methanol from abundant low grade carbonaceous resources ; methane, carbon dioxide, coal and biomass etc. Methanol is a Clean energy source which is a readily storable and transportable liquid. It is elaborated to correlate power generation, city gas and chemical feed stocks including transportation fuel, enhancing the national efficiency of resource utilization as well as reducing the environmental problems for the future via C1 technology. It is emphasized that $CO_2$ could be used to produce methanol as a mean of hydrogen storage as in the nature, which will alleviate the environmental problem such as green house effect.

• Journal of Energy Engineering
• /
• v.25 no.4
• /
• pp.214-225
• /
• 2016

Gasification is one of the important contribution to resource recycling by conversion of biomass to a variety of energy sources such as alcohol, SNG etc., and to global warming prevention by reduction of green house gases such as $CO_2$. The aim of this study is to draw the optimal operation condition of dual fluidized-bed gasifier with biomass fuel, to verify SNG production efficiency and to establish the basis for the domestic commercialization of dual fluidized bed gasification. As a result, dual fluidized-bed gasifier has the optimal conditions at $826^{\circ}C$ with steam input 1,334 g/hr, air input 5.56 L/min. The carbon conversion is 81% and SNG production efficiency was $CH_4$ 92%.