• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.648-653
• /
• 2003

Optimized recovery of heavy minerals from the near shore sands of Korean Yellow Sea was investigated using physical processing technologies such as gravity concentration and magnetic separation. The head samples were subjected to the three stages effective separation; Head sample was first treated by a spiral separator to recover rough heavy mineral concentrates, which are contained minerals like ilmenite, zircon and rare earth minerals. Much higher beneficiation processes were subsequently taken by wilfley table and magnetic separation according to their magnetic field responses. Heavy minerals were effectively recovered by wilfley table and subsequent recleaning of heavy minerals by magnetic separations was conducted. Qualitative and relative-quantitative analyses of their constituent elements were doing using XRD and XRF.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.271-276
• /
• 2008

The oil trap in oil separator is one of the most important characteristics for normal operation of compressor. In this study, oil separation characteristics has been investigated for $CO_2$/PAG mixture using a gravity type of oil separator. The experimental study has been carried out in the range of oil concentration 0 to 5 weight-percent and the mixture temperature range of $0^{\circ}C$ to $15^{\circ}C$. The results obtained indicate that oil separation ratio in oil separator is increased with an increase in the oil concentration and mixture temperature.

• ETRI Journal
• /
• 제27권3호
• /
• pp.294-303
• /
• 2005

In this paper, a supervised algorithm for the evaluation of geophysical sites using a multi-level cellular neural network (ML-CNN) is introduced, developed, and applied to real data. ML-CNN is a stochastic image processing technique based on template optimization using neighborhood relationships of the pixels. The separation/enhancement and border detection performance of the proposed method is evaluated by various interesting real applications. A genetic algorithm is used in the optimization of CNN templates. The first application is concerned with the separation of potential field data of the Dumluca chromite region, which is one of the rich reserves of Turkey; in this context, the classical approach to the gravity anomaly separation method is one of the main problems in geophysics. The other application is the border detection of archeological ruins of the Hittite Empire in Turkey. The Hittite civilization sites located at the Sivas-Altinyayla region of Turkey are among the most important archeological sites in history, one reason among others being that written documentation was first produced by this civilization.

• Structural Engineering and Mechanics
• /
• 제15권3호
• /
• pp.331-344
• /
• 2003

The plane contact problem for two infinite elastic layers whose elastic constants and heights are different is considered. The layers lying on a Winkler foundation are acted upon by symmetrical distributed loads whose lengths are 2a applied to the upper layer and uniform vertical body forces due to the effect of gravity in the layers. It is assumed that the contact between two elastic layers is frictionless and that only compressive normal tractions can be transmitted through the interface. The contact along the interface will be continuous if the value of the load factor, ${\lambda}$, is less than a critical value. However, interface separation takes place if it exceeds this critical value. First, the problem of continuous contact is solved and the value of the critical load factor, ${\lambda}_{cr}$, is determined. Then, the discontinuous contact problem is formulated in terms of a singular integral equation. Numerical solutions for contact stress distribution, the size of the separation areas, critical load factor and separation distance, and vertical displacement in the separation zone are given for various dimensionless quantities and distributed loads.

• 상하수도학회지
• /
• 제22권3호
• /
• pp.359-366
• /
• 2008

The series of experiments under the various conditions were carried out to evaluate the feasibility of dissolved air flotation (DAF) as an alternative of conventional gravity sedimentation (CGS) and to investigate the decrease of the loadings following to biological wastewater treatment processes in livestock wastewater system. On the basis of the experiment result between CGS and DAF processes, for the other water quality criteria as well as suspended solid the removal efficiency of DAF process was about 20~25 % better than CGS process on average. In addition, the particle removal efficiency of DAF process became higher in proportion as the increase of air to solid (A/S) ratio and the general wastewater treatment efficiency of DAF process was enough to meet the requirement of loading decrease to following biological process even at low A/S ratio range. Though DAF process is widely known as an solid separation unit, there was not the notable relationship between particle separation efficiency and several pollutant removal efficiencies like $COD_{Cr}$ and nutrients (T-N, T-P). Assume that the $COD_{Cr}$ was removed as the fraction of particle separation in this experiment, the removal efficiency of T-N and T-P were sensitive to removal efficiency of $COD_{Cr}$, especially.

• 자원리싸이클링
• /
• 제16권5호
• /
• pp.13-18
• /
• 2007

폐콘크리트를 재활용하기 위하여 파쇄과정과 입도조절과정을 거쳐서 생산된 재생골재에는 모르타르나 시멘트페이스트가 많이 부착되어 있어 밀도가 낮고 흡수율이 높아 구조용 골재로 사용할 수 없는 실정이다. 그러나 생산된 재생골재 내에는 많은 양의 콘크리트용 재생골재가 포함되어 있으며 이들을 비중선별방법 중 중액선별을 통해 선별하여 콘크리트용 1종 재생골재를 약 45%정도를 생산할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제25권4호
• /
• pp.383-403
• /
• 2007

The contact problem for an elastic layer resting on an elastic half plane is considered according to the theory of elasticity with integral transformation technique. External loads P and Q are transmitted to the layer by means of two dissimilar rigid flat punches. Widths of punches are different and the thickness of the layer is h. All surfaces are frictionless and it is assumed that the layer is subjected to uniform vertical body force due to effect of gravity. The contact along the interface between elastic layer and half plane will be continuous, if the value of load factor, ${\lambda}$, is less than a critical value, ${\lambda}_{cr}$. However, if tensile tractions are not allowed on the interface, for ${\lambda}$ > ${\lambda}_{cr}$ the layer separates from the interface along a certain finite region. First the continuous contact problem is reduced to singular integral equations and solved numerically using appropriate Gauss-Chebyshev integration formulas. Initial separation loads, ${\lambda}_{cr}$, initial separation points, $x_{cr}$, are determined. Also the required distance between the punches to avoid any separation between the punches and the layer is studied and the limit distance between punches that ends interaction of punches, is investigated. Then discontinuous contact problem is formulated in terms of singular integral equations. The numerical results for initial and end points of the separation region, displacements of the region and the contact stress distribution along the interface between elastic layer and half plane is determined for various dimensionless quantities.

• 한국광물학회지
• /
• 제20권4호
• /
• pp.289-302
• /
• 2007

전라남도 신안군 자은도의 둔장해수욕장 해변으로부터 채취한 해빈사로부터 중광물 회수공정을 실시하여, 중광물의 특징 및 회수 가능성에 대한 연구를 수행하였다. 채취 시료는 깊이별로 상부, 중부 및 하부시료로 구분한 뒤 각각에 대하여 spiral separation을 실시하여 얻은 중광물군을 초기물질로 3차에 걸친 중광물 선별작업을 실시하였다. 본 역에서 배태되어 있는 중광물로 티탄철석, 저어콘, 금홍석, 아나타제, 모나자이트 및 제노타임 등이 관찰되었다. 3차에 걸친 Table separation을 실시한 결과, 맥석광물인 석영, 정장석, 알바이트 및 백운모가 여전히 존재하였다. 따라서 부가적으로 비중선별이 추가적으로 요구된다. 수선을 통한 중광물의 선별을 실시한 결과, 각 중광물의 다양한 원마도 및 색깔을 보임으로써, 배태된 중광물들이 다양한 성인에 의해 형성되었음을 시사하고 있다.

• 한국광물학회지
• /
• 제22권3호
• /
• pp.191-197
• /
• 2009

고순도 금속급 실리콘 제조에서는 원료가 되는 실리카 광물의 $SiO_2$ 품위가 매우 중요한 요소이다. 베트남 규사광에 대한 광물학적 분석결과를 토대로, 석영과 불순광물의 광물학적 특성차이를 이용하는 분급, 비중 및 자력선별을 포함하는 물리적 종합정제공정을 구성하여 적용시켰다. $SiO_2$ 품위 99.8 wt% 이상의 고순도 규사 정광을 93 wt% 이상 회수하였다. 이러한 고순도 규사 정광은 금속급 실리콘의 순도 규격에 적합하였다.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.474-482
• /
• 2007

초음속 공중발사 로켓의 모선분리에 대한 유동해석을 수행하였다. 전기체 형상의 모선(F-4E Phantom)에서 분리되는 로켓주변 유동장의 정상/비정상 유동해석을 위해 압축성 Navier-Stokes 방정식이 사용되었으며, 해석결과는 모선과 로켓간의 충격파-팽창파 간섭효과를 잘 보여주고 있다. 무게중심의 변화에 따른 로켓의 거동을 예측하기 위하여 세 가지 경우에 대한 전산해석을 수행하였으며, 결과적으로 초음속 공중발사 로켓의 안전한 모선분리를 위한 설계 가이드라인을 제시하였다.