• Journal of Korea Foundry Society
• /
• v.18 no.3
• /
• pp.262-270
• /
• 1998

Gravity tilt pour casting can effectively guarantee the reduction of various casting defects by controlling the rotation speed and the tilting angle of the mold during tilt pouring. The relationship between casting process parameters and the soundness of castings has been investigated in order to determine the optimum process variables in the gravity tilt pour casting process. In order to evaluate the effect of rotation speed on mold filling patterns, a video camera was employed to visualize the in-situ fluid flow behavior of the molten metal, and the relevant fluid velocity was also estimated. X-ray and mechanical tests were also performed to evaluate the effect of fluid velocity on casting quality. With the rotation speed lower than 0.5 r.p.m., which is nearly corresponding to the critical velocity of stability in the fluid flow, sound castings were obtained without having any casting defects. It can be concluded that the gravity tilt pour casting process is an effective process for manufacturing sound casting products with enhanced physical and mechanical properties.

• Geophysics and Geophysical Exploration
• /
• v.13 no.1
• /
• pp.88-95
• /
• 2010

An airborne gravity survey using a helicopter was carried out in October 2008, offshore along the northern Noto Peninsula, to understand the shallow and regional underground structure. Eleven flight lines, including three tie lines, were arranged at 2 km spacing within 20 km of the coast. The total length of the flight lines was ~700 km. The Bouguer anomalies computed from the airborne gravimetry are consistent with those computed from land and shipborne gravimetry, which gradually decrease in the offshore direction. So, the accuracy of the airborne system is considered to be adequate. A local gravity low in Wajima Bay, which was already known from seafloor gravimetry, was also observed. This suggests that the airborne system has a structural resolution of ~2 km. Reduction of gravity data to a common datum was conducted by compiling the three kinds of gravity data, from airborne, shipborne, and land surveys. In the present study, we have used a solid angle numerical integration method and an iteration method. We finally calculated the gravity anomalies at 300 m above sea level. We needed to add corrections of 2.5 mGals in order to compile the airborne and shipborne gravity data smoothly, so the accuracy of the Bouguer anomaly map is considered to be nearly 2 mGal on the whole, and 5 mGals at worst in limited or local areas.

• Journal of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.61-65
• /
• 1995

We discuss a model4-dimensional Friedmann cosmology which may have evolved from a model of 4+D dimensions which admits spontaneous compactification of D dimensions (or N-dimensional variants of the Brans-Dicke (BD) theory). The BD parameter appearing in dimensional reduction is negative $-1<\omega<0$ (for the N-dimensional variants of the BD theory, $-1.5{\leq}{\omega})$. We find that if there had been inflationary transtion to the standard big-bang model, the Universe can undergoe a polar-type expansion during when the gravitational coupling becomes negative. The unique feature is that for the negative w, the density parameter of the post-inflationary Universe falls in a range 0<0<1 even if the Universe is geometrically flat (k = 0).

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.5 no.1
• /
• pp.1-12
• /
• 1987

Using double-measurmented gravity values which observed by Lacoste instrument, drifts and MSE are analized after TIDE correction and Bouguer reduction is investigation. As the result of this study, it is possible to calculation a latitude, longitude, gravity and elevation at unknown point, and perphaps will be used as a fundamental data for application in the earth's crust structural analysis and geophysics.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.10a
• /
• pp.472-475
• /
• 2005

In this study, the equivalent physical properties of the shield-slot plate that has a lot of very tiny bridge shape structures on its plane were determined by tensile tests and structural analyses. With those results in hand, numerical analyses for the deflection profile by gravity effect were carried out to compare with experimental results. The two results were shown coincident very well so that the estimated equivalent physical properties were verified enough for further studies such as curvature reduction for the shield-slot plate.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.83-93
• /
• 2008

The topographic effect is one of the most important component in the solution of the geodetic boundary value problem (geodetic BVP). Therefore, topographic effect should be considered properly for developing the precise geoid model, especially for the area where contains many mountains like Korea. The selection of gravity reduction method in the context of the precise geoid determination depends on the magnitude of its indirect effect, the smoothness and magnitude of the reduced gravity anomalies, and their related geophysical interpretation. In this study, Korean digital elevation model with 100m resolution was constructed and topographic effect was calculated by three reduction methods as like Helmert condensation method and RTM method and Airy-isostatic reduction method. Through the analysis of computation results, we can find that RTM reduction method is the best optimal method and the results shows that gravity anomaly and indirect effect of geoidal height are $0.660{\pm}13.009mGal$, $-0.004{\pm}0.131m$ respectively and it is the most gentle slow of the three methods. Through this study, it was found that the RTM method is better suitable for calculating topographic effect precisely in context of precise geoid determination in Korea than other reduction methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.105-106
• /
• 2017

Previous studies have confirmed the performance of pH reduction agents using liquid sodium phosphate based ammonium chloride as a pH reduction agent. In this study, the pH reduction performance considering economical and applicability as a practical stage and the property change analysis for the identification of the reaction mechanism of the pH reduction agent were carried out. As a result, the pH reduction performance at a low rate of the pH reducing agent was confirmed. The specific gravity of CaO decreased significantly after XRF analysis. It is also believed that this reduces the amount of Ca(OH)₂ produced and contributes to pH reduction.

• Journal of the Korean Geophysical Society
• /
• v.7 no.1
• /
• pp.1-10
• /
• 2004

Gravity, magnetic and high-resolution seismic surveys were carried out in the Powell Basin to examine tectonic structure and recent sedimentation on Dec. 2002. The trend of negative gravity anomalies along the spreading axis of the Powell Basin changes from northwest to east-west toward south. Both boundaries of the basin with the Antarctic Peninsula and the South Orkey micro-continent show negative magnetic anomalies, which indicates that the boundaries were continental rift areas in the initial stage of spreading. Magnitude of the magnetic anomalies corresponding to the axis of the basin is rather small compared to those of normal spreading axises in other regions. Such small anomalies would be caused by reduction of magnetic strength of oceanic crust below thick sediments due to thermal alternation. High-resolution (3.5 kHz) seismic profiles reveal that top of the South Scotia Ridge is a flat terrain coverd with thin coarse sediments by glacial erosion. Thick oceanic sediments are deposited in the central part of the basin. Little deformation in the oceanic sediments indicates that the Powell Basin has been in stable tectonic environment after spreading of the basin stopped.

• Proceedings of the KWS Conference
• /
• 2003.11a
• /
• pp.207-209
• /
• 2003

In FE analysis for residual stress of a casting, contact force between mould and casting material and gravity force must be considered for exact simulation. Preheating of a repair weldment had a little effects on the reduction of residual stress. However, preheating with hammer peening had a great deal of effects on the reduction of residual stress. A method for estimation of fatigue life for a repair weldment has been established.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2003.03a
• /
• pp.302-310
• /
• 2003

Cracking of slabs will be caused by applied load and volume changes during the life of a structure and thus it reduces flexural stiffness of slabs. The effect of slab cracking must be considered for appropriate modeling of the flexural stiffness for frame members used in structural analysis. Analytical and experimental study was undertaken to estimate the stiffness reduction of slabs. In the analytical approach, the trend of slab stiffness reduction related to gravity and lateral loads is found and the stiffness reduction factor ranged from a half to a quarter in ACI building code is reasonable when defining range. Analyzing results of the test by Hwang and Moehle for 0.5% drift show that the differences of rotational stiffness on the connection types is found and good results of lateral stiffness using the value of one-third is obtained.