• 제목/요약/키워드: gravity interpretation

검색결과 51건 처리시간 0.022초

중력장 해석으로 관측된 동두천 및 왕숙천 단층의 변위 (Displacement of Dongducheon and Wangsukcheon Fault Observed by Gravity Field Interpretation)

  • 최승찬;김성욱;최은경;신영홍
    • 자원환경지질
    • /
    • 제57권1호
    • /
    • pp.73-81
    • /
    • 2024
  • 추가령 단층대의 지구조적인 이동을 확인하기 위해 경기 북부와 양주 및 서울 지역을 통과하는 동두천 단층과 서울 동쪽 지역에서 북동-남서 방향으로 발달한 왕숙천 단층을 따라서 중력장을 측정하였으며 두 지역에서 약 1,100여 점의 중력 자료를 획득하였다. 두 단층대의 중력장 해석 결과는 다음과 같다. (1) 동두천 단층이 우향으로 약 3,000 m 정도 이동하였으며 이는 지질도에서 관찰되는 동두천 단층 일원 암석의 우향 이동 규모(2,900-3,100 m)와 일치한다. (2) 왕숙천 단층의 우향 변위는 약 3,200 m 이다. (3) 이를 종합하면, 추가령 단층대의 우향 변위는 평균 약 3,000 m 정도로 판단된다. 추가령 단층대의 변위를 좀 더 정확히 확인하기 위해서, 포천 단층, 경강 단층 및 인제 단층의 변위 정도를 파악하기 위한 중력 측정과 해석이 추가로 필요하다.

A Study on the Generation of Capillary Waves on Steep Gravity Waves

  • Lee, Seung-Joon
    • Journal of Ship and Ocean Technology
    • /
    • 제4권4호
    • /
    • pp.45-55
    • /
    • 2000
  • A formal solution method using the complex analysis is given for the problems derived by Longuet-Higgins(1963). The same method is applied to a new perturbation problem of higher approximation. Interpretation of its solution made it possible to confirm that the rough agree-ment of Longuet-Higgins\`s prediction with experimental data of Cox(1958) was mainly due to the fact that the gravity effect in the perturbation problem was neglected for the case when the basic gravity wave not sufficiently steep.

  • PDF

활성단층의 3차원적인 규모를 결정하기 위한 중력장 데이터의 해석 및 지각구조 모델링: 양산단층에서의 예 (Gravity Field Interpretation and Underground Structure Modelling as a Method of Setting Horizontal and Vertical Zoning of a Active Fault Core)

  • 최승찬;김성욱;최은경;이영철;하상민
    • 자원환경지질
    • /
    • 제54권1호
    • /
    • pp.91-103
    • /
    • 2021
  • 경상북도 포항시 냉수리 지역에 위치하는 양산단층의 수평 및 수직적 규모를 파악하기 위해서 단층을 동-서로 가로지르는 측선을 따라 중력장을 측정하였다. 그 결과, 단층 경계부에서 1.5 mGal의 뚜렷한 중력의 변화를 확인하였다. 이는 양산단층 서쪽과 동쪽의 지각 밀도가 서로 다르다는 것을 나타내며, 기존의 지질 및 지구물리 조사 결과와 비교해 보았을 때, 냉수리를 통과하는 양산단층은 서쪽의 불국사 화강암층과 동쪽의 경상계 퇴적암이 혼합된 파쇄대라는 것을 의미한다. 오일러 디콘볼루션(Euler deconvolution) 및 곡률 분석(Curvature analysis) 방식을 이용하여 파쇄대의 3차원적 규모를 확인한 결과, 깊이는 약 2,000 m이며, 남남서-북북동 방향으로 최소 약 3,000 m 정도 이어지는 것으로 파악되었다. IGMAS+ 소프트웨어를 이용한 지각구조 모델링 결과는 파쇄대 서쪽과 동쪽 지각의 밀도 차이가 약 0.1 g/㎤이라는 것을 보여주었다. 이상의 연구 결과는 중력장 데이터의 해석과 모델링이 지표면에 나타난 활성단층의 규모를 심부까지 파악 할 수 있는 매우 효과적인 방법이라는 것을 보여준다. 또한 지금까지 지표면을 중심으로 2차원적으로 수행했던 활성단층 지도 제작 사업의 영역을 3차원으로 확대할 수 있는 이상적인 수단이 된다.

경기도 인천지역 분포하는 화산암류에 대한 중력 및 자력 탐사 연구 (Gravity and Magnetic Surverys for Volcanic Rocks in Yeoncheon Area, kyonggi-do)

  • 박혁진
    • 자원환경지질
    • /
    • 제32권6호
    • /
    • pp.645-651
    • /
    • 1999
  • The gravity and magnetic measurements have been obtained from 34 stations with 50m intervals along the survey line positioned between Jangtanri and sindapri for studying subsurface geology and structures of the volcanic rocks in Yeoncheon area. The Bouguer gravity and magnetic anomaly values were evaluated from the reduction of the field observation, and then interpreted by Nettleton's method and maximum-pepth rules, are approximately 160m based on magnetic data and 135m based on gravity data. High Bouguer gravity anomaly zone between 0m in Jangtanri and 900m along the survery line, is caused by thick and high density, older dasalt which is positioned beneath jijangbong tuff breccia, and this result corresponds to the interpretation result based on magnetic anomly. Lower gravity and magnetic anomaly zones ariund 900m are caused by between 1300m and 1550m are caused by high density of Quarternary basalt exposed in the surface, and lower gravity and magnetic anomalies at 200m and 1250m are caused by faults.

  • PDF

중력 데이터 해석과 드론원격정보를 이용한 지반의 다짐도 평가 (Evaluation of Soil Compaction Using Gravity Field Interpretation and UAV-based Remote Sensing Information)

  • 김성욱;최승찬;최은경;이영재;고대홍;이규환
    • 지질공학
    • /
    • 제31권3호
    • /
    • pp.283-293
    • /
    • 2021
  • 고해상 드론 기반의 지형 정보와 중력장 데이터를 이용하여 다짐지반의 모양과 균질성을 분석하였다. 지형과 수문 모형에서 계산된 지형요소 중 곡률은 다짐과정에서 발생한 지형의 변화를 효과적으로 보여 주었으며 이를 통해 불균질 다짐 영역을 확인할 수 있다. 지형 정보의 적정 해상도는 10 cm 정도였다. 성토지반의 공간적인 밀도변화를 분석하기 위해 중력장 해석을 수행하였으며 완전 부게이상의 변화로부터 불균질 다짐 영역과 지하 밀도구조 모델링을 통해 다짐도 차이에 의한 불균질 영역을 파악하였다. 연구결과로부터 지형요소와 중력장 해석법은 다짐된 지반의 균질성을 평가법이 될 수 있을 것으로 판단된다.

3차원 중력 모델링에 의해 예측된 황해 북부 서한만 분지 석유 저류층의 공간적 분포 (Spatial distribution of hydrocarbon reservoirs in the West Korea Bay Basin in the northern part of the Yellow Sea, estimated by 3D gravity forward modeling)

  • 최승찬;유인창
    • 지질학회지
    • /
    • 제54권6호
    • /
    • pp.641-656
    • /
    • 2018
  • 북한의 서한만 분지 내에는 경제성이 있는 석유 자원이 존재할 것이라는 것이 여러 경로를 통해서 보고되고 있으나, 북한의 비밀주의 원칙에 의해서, 이 지역의 지질 및 지구물리학적인 연구를 위한 데이터가 공개된 적은 극히 드물었다. 그렇기 때문에 인공위성으로부터 제공되는 중력장 데이터는 서한만 퇴적분지의 구조를 밝혀내고, 이를 통해서 서한만 퇴적분지 내의 석유 부존자원 연구를 위해서 차선책으로 매우 유용하게 이용될 수 있다. 본 연구는 인공위성 데이터를 기반으로 만들어진 TRIDENT 중력장 데이터의 해석과 더불어 서한만 분지내에서 지금까지 수행된 지질 및 지구물리 데이터를 이용하여 서한만 퇴적분지의 3차원적인 밀도 구조를 밝혀내고자 수행되었다. 본 연구 결과, 서한만 분지 중, 2 군데의 지역에서 약 $2,000kg/m^3$의 매우 낮은 밀도를 특징으로 하는 저밀도 지층이 존재한다는 것을 확인하였으며, 이는 이 지역 퇴적분지 내에 석유 부존자원이 존재할 가능성이 매우 높다는 것을 시사한다. 한 곳은 서한만 중앙분지(Central basin) 남쪽 지역 약 3,000 m 깊이 백악기/쥐라기(Cretaceous/Jurassic) 층 속에 존재하며 그 부피는 약 $250km^3$으로 판단된다. 다른 곳은 중앙분지의 북쪽 지하 약 2,500 m에 위치하며, 그 부피는 약 $300km^3$으로 판단된다. 최근에 확보한 서한만 분지의 해상 측정 중력 데이터는 위의 연구 결과가 신빙성이 매우 높다는 것을 보여줌과 동시에 중앙분지 북서쪽 보하이만 방향으로 또 다른 저밀도 지층이 존재할 가능성이 매우 높다는 것을 보여준다.

반복적(反復的) 역산법(逆算法)에 의(依)한 중력자료(重力資料)의 해석(解析)에 관(關)한 연구(硏究) (A Study on Interpretation of Gravity Data by using Iterative Inversion Methods)

  • 노철환;양승진;신창수
    • 자원환경지질
    • /
    • 제22권3호
    • /
    • pp.267-276
    • /
    • 1989
  • This paper presents results of interpretaton of gravity data by iterative nonlinear inversion methods. The gravity data are obtained by a theoretical formula for two-dimensional 2-layer structure. Depths to the basement of the structure are determined from the gravity data by four interative inversion methods. The four inversion methods used here are the Gradient, Gauss-Newton, Newton-Raphson, and Full Newton methods. Inversions are performed by using different initial guesses of depth for the over-determined, even-determined, and under-determined cases. This study shows that the depth can be determined well by all of the methods and most efficiently by the Newton-Raphson method.

  • PDF

충북 제천 NMC 몰랜드 광산의 관계 화성암에 대한 중력탐사 (Gravity Exploration Inferring the Source Granite of the NMC Moland Mine, Jecheon, Chungbuk)

  • 신영홍;유봉철;임무택;박영수;고인세
    • 자원환경지질
    • /
    • 제47권2호
    • /
    • pp.107-119
    • /
    • 2014
  • NMC 몰랜드 광산은 고생대 조선누층군을 관입한 화성암류에 의해 형성된 접촉교대 또는 스카른 광상으로 공간적으로 제천화강암과 인접해 있어 이 화강암을 관계 화성암으로 간주하여 대보 화성 활동과 관련하여 형성된 광상으로 해석하였으나, 최근에는 백악기 천부 반화강암질 암체에서 기원된 광화유체로부터 스카른화작용과 더불어 Mo 광화작용이 진행된 것이라는 해석이 제시되었다. 본 연구에서는 광산 일원에 대한 중력탐사를 통해 지하구조를 해석함으로써, 지표 지질에서 제천화강암이 광산에 훨씬 인접한 것과는 달리 지하에서는 남쪽의 백악기 무암사화강암이 광산 하부와 주변으로까지 뻗어있을 것으로 여겨지며, 결과적으로 광상 형성의 관계 화성암으로 작용하였을 것임을 제시한다.

반복적 비선형역산에 의한 2차원 지질구조의 중력자료 해석 연구 (A Study on Interpretation of Gravity Data on Two-Dimensional Geologic Structures by Iterative Nonlinear Inverse)

  • 고진석;양승진
    • 자원환경지질
    • /
    • 제27권5호
    • /
    • pp.479-489
    • /
    • 1994
  • In this paper, the iterative least-squares inversion method is used to determine shapes and density contrasts of 2-D structures from the gravity data. The 2-D structures are represented by their cross-sections of N-sided polygons with density contrasts which are constant or varying with depth. Gravity data are calculated by theoretical formulas for the above structure models. The data are considered as observed ones and used for inversions. The inversions are performed by the following processes: I) polygon's vertices and density contrast are initially assumed, 2) gravity are calculated for the assumed model and error between the true (observed) and calculated gravity are determined, 3) new vertices and density contrast are determined from the error by using the damped least-squares inversion method, and 4) final model is determined when the error is very small. Results of this study show that the shape and density contrast of each model are accurately determined when the density contrast is constant or vertical density gradient is known. In case where the density gradient is unknown, the inversion gives incorrect results. But the shape and density gradient of the model are determined when the surface density contrast is known.

  • PDF

토목.환경 응용을 위한 고정밀 중력탐사 (Microgravity for Engineering and Environmental Applications)

  • 박영수;임형래;임무택
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 특별 심포지엄 논문집
    • /
    • pp.15-25
    • /
    • 2007
  • Gravity method could be one of the most effective tool for evaluating the soundness of basement which is directly correlated with density and its variations. Moreover, Gravimeter is easy to handle and strong to electromagnetic noises. But, gravity anomaly due to the target structures in engineering and environmemtal applications are too small to detect, comparing to the external changes, such as, elevation, topography, and regional geological variations. Gravity method targeting these kinds of small anomaly sources with high precision usually called microgravity. Microgravimetry with precision and accuracy of few ${\mu}Gal$, can be achieved by the recent high-resolution gravimeter, careful field acquisition, and sophisticated processing, analysis, and interpretation routines. This paper describes the application of the microgravity, such as, density structure of a rock fill dam, detection of abandoned mine-shaft, detection and mapping of karstic cavities in limestone terrains, and time-lapse gravity for grout monitoring. The case studies show how the gravity anomalies detect the location of the targets and reveal the geologic structure by mapping density distributions and their variations.

  • PDF