• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.37-39
• /
• 1999

In this paper, the magnetic fluid linear pump is designed. Inside the small tube, magnetic fluid is shielded with thin rubber protector. The magnetic fluid activated by traveling pulses of magnetic field drags the water inside the pump. The iterative algorithm for the shape of magnetic fluid is presented by using nonlinear finite element method and Navier-Stokes equations. The computed curvature of fluid under the magnetic field and the gravitational force is agreed well with photograph image. The dimension and electric configurations of the magnetic linear pump are optimized and the results are compared with measurements.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1851-1856
• /
• 2004

Sedimentation phenomenon of suspended solids occurs by the gravitational force. Pollution particles are separated from slowly flowing wastewater in clarifier. Recently, the sludge suction collector is preferred rather than the scraper type sludge collector due to enhancement of the clarifier efficiency. The sludge suction collector is usually operated by the user's experiences without any scientific and/or technical consideration. To evaluate the performance of sludge suction collector, the three dimensional computer simulation was conducted by the finite volume method. To analyze the performance, the velocity vectors and the suction flow rates of the orifices were investigated. The result showed that each suction flow rate through out the collector was equivalent in the sludge suction collector and the efficiency of suction collector was good to remove high concentrated sludge in clarifier.

• 산업기술연구
• /
• 제27권B호
• /
• pp.201-208
• /
• 2007

This paper is research results of investigating the elastic settlement behavior of the coastal caisson structure built on the sandy deposit by comparing results of centrifuge model experiments and those of existing methods of estimating elastic settlement. Basic soil property tests such as specific gravity test, grain size distribution test and organic content test with disturbed soil sampled from the site were carried out. The centrifuge experiment of model satisfying the required design criteria was performed under 50 of artificial accelerated gravitational force condition. The Centrifuge model experimental results were compared and analyzed with the current methods of estimating settlement based on the elastic modulus obtained from the results of odeometer tests and empirical methods from literature reviews.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.415-420
• /
• 2003

Sedimentation phenomenon of suspended solids occurs by the gravitational force. Pollution particles are separated from slowly flowing wastewater in clarifier. Recently, the sludge suction collector is preferred rather than the scraper type sludge collector due to enhancement of the clarifier efficiency. The sludge suction collector is usually operated by the user's experiences without any scientific and/or technical consideration. To evaluate the performance of sludge suction collector, the three dimensional computer simulation was conducted by the finite volume method. To analyze the performance, the velocity vectors and the suction flow rates of the orifices were investigated. The result showed that each suction flow rate through out the collector was equivalent in the sludge suction collector and the efficiency of suction collector was good to remove high concentrated sludge in clarifier.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2007년도 하계학술대회 논문집
• /
• pp.328-330
• /
• 2007

This paper deals with the estimation method on the initial pole position of a z-axis permanent magnet linear synchronous motor(PMLSM) without magnetic pole sensors such as Hall sensors. The proposed method takes account of the z-axis conditions such as the gravitational force and also the load conditions. The algorithm consists of two steps. The first step is to estimate the initial q-axis approximately by monitoring the movements at predefined different test q-axes. The second step is to estimate the real q-axis as accurately as possible based on the results at three different test q-axes. Experimental results on the z-axis PMLSM show good estimation characteristics of the proposed method.

• 항공우주의학회지
• /
• 제30권1호
• /
• pp.25-29
• /
• 2020

Space exploration is one of the dreams of humankind. However, the intriguing environment was a challenge for the human body, where we must counter with many extreme conditions such as thermal support, radiation, microgravity. Life, as well as the human body, developed and evolved in the continuous presence of gravity, especially when living creatures transfer from the ocean to the land. Once this gravitational force doesn't impact on the body, the drastic changes occur. Some of these changes were observed immediately, while others progress only slowly. Since the first orbital flight was performed, several hazards for the organs of the human body were identified [1]. These changes in human physiology can reverse when astronauts return to Earth. This article will review the published findings of the effects of microgravity exposure on the human body.

• 천문학회보
• /
• 제44권2호
• /
• pp.59.3-59.3
• /
• 2019

The last two decades have seen an immense growth in our understanding of the physics of the birth and evolution of our Universe. However there are still many unanswered questions, such as: what is the nature of the dark energy, which drives the acceleration of the expansion of the Universe? Is the acceleration driven by a cosmological constant, some dynamical dark energy, or a modification of the gravitational force law on large scales? The next generation of radio observatories will conduct large area radio continuum and HI intensity mapping surveys, and so will make possible new and complimentary tests of these fundamental questions. In this talk I present the design of these next generation of surveys, current forecasts for the effectiveness of these cosmological probes, and results from precursor experiments.

• 대한조선학회논문집
• /
• 제46권5호
• /
• pp.527-535
• /
• 2009

This paper describes the control system to suppress the load pendulation using tagline for the floating crane. Dynamic equation of motion of the floating crane and the load is derived using Newton's 2nd law and free body model. The floating crane and the load are assumed that they move in center plane. Each rigid body has 3 DOF (surge, heave, pitch), because it moves in two directions and rotates. Then, this system, which is composed of two rigid bodies, has 6 DOF. The gravitational force, the hydrostatic force, the hydrodynamic force and the tension of the wire rope are considered as external forces, which affect to the floating crane. To suppress the pendulation of the load, the tagline, which connects between the load and the float crane, is applied to the system. The tagline is composed of the spring and the wire rope. Proportional and Derivative control is used as a linear control algorithm. The results of the numerical analysis of the 3,600 ton floating crane show that the tagline system is effective to suppress the load pendulation.

• 한국정보통신학회논문지
• /
• 제8권8호
• /
• pp.1732-1739
• /
• 2004

본 논문은 다량의 가변적인 정보를 보유하고 있는 수중에서 유동하는 입자의 움직임을 추적하고 유체의 흐름에 따라 분산되는 입자의 분산정도 그리고 입자의 침전패턴을 정확하게 예측해내기 위해 인공신경망 알고리즘을 도입한 가시화 시스템을 제안한다. 이러한 시스템은 물과 같은 공간에서 움직이는 다양한 입자들을 고려하고 있는데, 물의 흐름을 위해서 운동량방정식과 연속방정식을 일반화하여 흐름을 제어하고 있다. 또한 입자간에 작용하는 부력, 침강력 등의 물리적인 힘과 침전패턴에 주요한 영향을 주고 있는 입자간의 충돌은 인공신경망 ART2를 이용하여 충돌을 감지하도록 하고 있다. 본 논문에서 제안한 시스템을 통해 다양한 외부적인 요인에 따라 움직임을 달리하는 유동 입자들을 실제 물에서와 같이 유사하게 가시화되도록 한다. 또한 가시화된 유동 입자의 움직임을 효율적으로 추적하고, 침전하는 입자들의 패턴까지도 미리 예측해 낼 수 있다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제22권2호
• /
• pp.7-11
• /
• 2020

When rivers and lakes are contaminated with numerous contaminants, usually the contaminants are finally deposited on the sediments of the waterbody. Many clean up technologies have been developed for the contaminated sediments. Among several technologies dredging is one of the best methods because dredging removes all the contaminated sediments from the water and the contaminated sediments can be completely treated with physical and chemical methods. However the most worried phenomenon is suspension of fine particles during the dredging process. The suspended particle can release contaminants into water and resulted in spread of the contaminants and the increase of risk due to the resuspension of the precipitated contaminants such as heavy metals and toxic organic compounds. Therefore the success of the dredging process depends on the prevention of resuspension of fine particles. Advanced dredging processes employ pumping the sediment with water onto a ship and release the turbid water pumped with sediment into waterbody after collection of sediment solids. Before release of the turbid water into lake or river, just a few minutes allowed to precipitate the suspended particle due to the limited area on a dredging ship. However the fine particle cannot be removed by the gravitational settling over a few minutes. Environmental technology such as coagulation and precipitation could be applied for the settling of fine particles. However, the process needs coagulants and big settling tanks. For the quick settling of the fine particles suspended during dredging process magnetic separation has been tested in current study. Magnetic force increased the settling velocity and the increased settling process can reduce the volume of settling tank usually located in a ship for dredging. The magnetic assisted settling also decreased the heavy metal release through the turbid water by precipitating highly contaminated particles with magnetic force.