• 전자공학회논문지T
• /
• 제36T권1호
• /
• pp.64-70
• /
• 1999

본 논문에서는 매니퓰레이터로 작업체 이동시 이동방향 가, 감속에 따른 미끄럼, 회전등의 위치에러 방지를 위한 그리퍼 힘 제어를 작업계획도를 설정해 구간별로 알아본다. 또한 작업체와 매니퓰레이터사이에 가장 정확한 정보를 제공할 수 있는 tactile 센서를 그리퍼에 부착해 연속적으로 tactile 영상 데이터 추론을 통해 미끄럼과 회전을 감지한다. 계산된 파지력과 감지된 에러량 비교를 통해 보상제어와 이를 응용한 최적의 파지력을 구할 수 있다. tactile 센서로는 압각센서인 FSR(Froce Sensing Resistor)을 사용해 22×22 센서회로를 구성하였다. 전처리로써 연속적인 taxel 수를 문턱값으로 설정해 필터링 작업을 하였고, 모멘트 메써드를 감지 알고리즘으로 사용해 실험하였다.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.99-104
• /
• 2009

This article describes the analysis of stable grasping for multi-fingered robot. An analysis method of stable grasping, which is based on the three-dimensional acceleration convex polytope, is proposed. This method is derived from combining dynamic equations governing object motion and robot motion, force relationship and acceleration relationship between robot fingers and object's gravity center through contact condition, and constraint equations for satisfying no-slip conditions at every contact points. After mapping no-slip condition to torque space, we derived intersected region of given torque bounds and the mapped region in torque space so that the intersected region in torque space guarantees no excessive torque as well as no-slip at the contact points. The intersected region in torque space is mapped to an acceleration convex polytope corresponding to the maximum acceleration boundaries which can be exerted by the robot fingers under the given individual bounds of each joints torque and without causing slip at the contacts. As will be shown through the analysis and examples, the stable grasping depends on the joint driving torque limits, the posture and the mass of robot fingers, the configuration and the mass of an object, the grasp position, the friction coefficients between the object surface and finger end-effectors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.751-752
• /
• 2010

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1013-1014
• /
• 2010

• 감성과학
• /
• 제5권1호
• /
• pp.1-7
• /
• 2002

본 논문에서는 가상환경하에서 사용자가 느끼는 물체의 무게감에 관해 연구하며, 3D mouse에 스프링의 탄성력을 이용한 근력입력장치를 새롭게 디자인한다. 근력입력장치는 몰입형 가상환경에서 사용자들의 악력을 이용하여 힘이나 무게를 느낄 수 있도록 고안된 장비이다. 본 논문에서는 물체의 부피와 무게감에 관한 실험, 물체의 재질과 무게감에 관한 실험, 근력입력장치의 악력과 무게감에 관한 실험 등 세 가지 실험을 수행하여 비교·분석한다. 실험결과의 통계적 분석 및 사용자 설문지 분석을 통해서 얻은 결론은 몰입형 가상환경하에서 부피와 재질은 사용자들에게 현실감 있는 무게감을 느끼는 데 중요한 역할을 하지 못하지만, 근력입력장치의 악력을 사용할 경우 현실감을 증대시키며 무게감을 느끼는 데 중요한 역할을 한다. 본 연구에서 제안한 근력입력장치는 무게감을 제공하는 데 효과적이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2665-2669
• /
• 2003

A wearable device to assist fingering function for disabled is developed in this study. This is the second paper to report the progress in development of this assisting device. The device is developed for a patient who suffers from cervical spinal cord injury. In the first paper, it was reported that the patient could successfully pick up several types of objects with his paralyzed fingers by using this device. As a next step, the maneuverability of the device under grasping operation is discussed in this paper. Maneuverability of the system is experimentally evaluated. The dexterity in controlling finger force is compared between the cases that non-disabled examinees operate their finger with inherent abilities and that a disabled examinee operates his finger by using the assisting device.

• 한국정밀공학회지
• /
• 제19권11호
• /
• pp.54-64
• /
• 2002

This paper deals with the problem of synthesis of stable and optimal grasps with unknown objects by 3-finger hand. Previous robot grasp research has mainly analyzed with either unknown objects 2-dimensionally by vision sensor or known objects, such as cylindrical objects, 3-dimensionally. As extending the previous work, in this study we propose an algorithm to analyze grasp of unknown objects 3-dimensionally by using vision sensor. This is archived by two steps. The first step is to make a 3-dimensional geometrical model for unknown objects by using stereo matching. The second step is to find the optimal grasping points. In this step, we choose the 3-finger hand which has the characteristic of multi-finger hand and is easy to model. To find the optimal grasping points, genetic algorithm is employed and objective function minimizes the admissible force of finger tip applied to the objects. The algorithm is verified by computer simulation by which optimal grasping points of known objects with different angle are checked.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.670-673
• /
• 2000

This paper attempt analysis and computer simulation of dynamics of a set of dual multi-joint fingers with soft-deformable tips which are grasping. Firstly, a set of differential equation describing dynamics of the fingers and object together with geometric constraint of tight area-contacts is formulated by Euler-Lagrange's formalism. Secondly, problems of controlling both the internal force and the rotation angle of the grasped object under the constraints of area-contacts of tight area-contacts are discussed. The effect of geometric constraints of area-contacts on motion of the overall system is analyzed and a method of computer simulation for overall system of differential-algebraic equations is presented. Finally, simulation results are shown and the effects of geometric constraints of area-contact is discussed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.219-224
• /
• 2002

This paper aims to derive a mathematical model of the dynamics of handling tasks in robot finger which stable grasping and manipulates a rigid object with some dexterity. Firstly, a set of differential equation describing dynamics of the manipulators and object together with geometric constraint of tight area-contacts is formulated by Lagrange's equation. Secondly, problems of controlling both the internal force and the rotation angle of the grasped object under the constraints of area-contacts of tight area-contacts are discussed. The effect of geometric constraints of area-contacts on motion of the overall system is analyzed and a method of computer simulation for overall system of differential-algebraic equations is presented. Thirdly, simulation results are shown and the effects of geometric constraints of area-contact is discussed. Finally, it is shown that even in the simplest case of dual single D.O.F manipulators there exists a sensory feedback from sensing data of the rotational angle of the object to command inputs to joint actuators and this feedback connection from sensing to action eventually realizes secure grasping of the object, provided that the object is of rectangular shape and motion is confined to a horizontal plane.

• 한국해양공학회지
• /
• 제33권5호
• /
• pp.454-461
• /
• 2019

In autonomous interventions using an underwater vehicle with a manipulator, grasping based on target detection and recognition is one of the core technologies. To complete an autonomous grasping task, the vehicle body approaches the target closely and then holds it through operating the end-effector of the manipulator, while the vehicle maintains its position and attitude without unstable motion. For vehicle motion control, it is very important to identify the hydrodynamic parameters of the underwater vehicle, including the propulsion force. This study examined the propulsion characteristics of the autonomous intervention ROV developed by KRISO, because there is a difference between the real exerted force and the expected force. First, the mapping between the input signal and thrusting force for each underwater thruster was obtained through a water tank experiment. Next, the real propulsion forces and moments of the ROV exerted by thrusting forces were directly measured using an F/T (force/torque) sensor attached to the ROV. Finally, the differences between the measured and expected values were confirmed.