• 한국세라믹학회지
• /
• 제32권6호
• /
• pp.677-684
• /
• 1995

The effect of catalytic graphitization of petroleum cokes by the addition of aluminum were investigated. The degree of graphitization carbon body only fired at 230$0^{\circ}C$ was 0.5. But when the aluminum additive was added, the degree of graphitization was increased to 0.93. And Ts-effect was appeared as the catalytic effect. This effect was occurred by the formation-decomposition of aluminum carbide through the reaction of aluminum and cokes.

• 열처리공학회지
• /
• 제12권2호
• /
• pp.99-107
• /
• 1999

The graphitization is affected by the addition of small amount of the elements(such as Si, Al, Ni, B, Cr and Mn etc.) and the pre-treatment(such as cold rolling). Boron is well known element to accelerate the graphitization of cementite in high carbon steels. Also, cold rolling is known to accelerate the graphitization. But the graphitization nucleation mechanism by cold rolling is few reported. Therefore the effect of cold rolling in Fe-0.5%C-1.0%Si-0.47%Mn-0.005%B steel on the graphitization is investigated quantitatively using hardness test, optical microscope and scanning electron microscope, neutron induced microscopic radiography. The nucleation of graphite in cold-rolled Fe-0.5%C-1.0%Si-0.47%Mn-0.005%B steel is formed at void which is formed at pearlite/pearlite boundary by cold rolling. But the effect of cold rolling on graphitization in boron addition steel is more effective than that of no boron addition steel due to segregation of BN at void in boron addition steel.

• Composites Research
• /
• 제37권3호
• /
• pp.162-169
• /
• 2024

본 논문에서는 습식 방사 공정을 통한 PAN(polyacrylonitrile)계 전구체 섬유의 형태학적 제어 및 2종의 흑연화 촉진제(Ca, Ni)가 도입된 PAN계 탄소섬유의 흑연화 거동을 조사하였다. 흑연화 촉진제는 습식방사된 PAN 계 전구체 섬유의 열수 연신시 형성된 기공으로 도입되었으며, 결정구조 및 라만 분석을 통해 흑연화 촉진효과를 검토하였다. 1500℃의 상대적으로 낮은 온도에서는 흑연화에 큰 영향을 주지 않은 반면에, 2400℃의 고온에 서는 흑연화 촉진제 미처리 섬유와 비교하여 I_D/I_G 비율이 최대 2배까지 감소하는(GF-AS 0.54: GF-Ni100 0.28) 경향을 나타냈다. 흑연화도(degree of graphitization)는 Ca 흑연화 촉진제와 비교하여 Ni 흑연화 촉진제가 더 큰 영향을 끼침을 I_D/I_G 비율을 비교하여(GF-Ca100 0.42: GF-Ni100 0.28) 확인할 수 있었다. 또한, 2D band의 존재로부터 흑연평면구조가 다층으로 구성되어 있음을 알 수 있었다. 흑연결정의 결정면간거리(d₀₀₂)에 대한 흑연화 촉진제 효과는 미비하였으나, 특히 Ca 흑연화 촉진제 처리된 흑연섬유(GF-Ca100)의 경우 최대 ~5 nm 결정 크기가 증가함이 확인되었다.

• 한국세라믹학회지
• /
• 제34권4호
• /
• pp.413-419
• /
• 1997

The specimens which were prepared from cokes with additions of 0~25 wt% B4C were sintered in Ar atmosphere at 220$0^{\circ}C$. The effects of B4C content on graphitization and oxidation resistance of cokes were investigated. B4C accelerates the graphitization of cokes and at 220$0^{\circ}C$ the degree of graphitization increased from 0.33 which is the value of pure carbon to 0.56, which increased bluk density and porosity. Especially bending strength increased as th graphitization temperature increased. Oxidation resistance property was greatly improved when B4C was added more than 10wt% at 80$0^{\circ}C$ and when B4C was added more than 20wt% at 100$0^{\circ}C$. This was because that the thin layer of B2O3 glass phase on the surface of the composite could be identified to increase the oxidation resistance.

• Carbon letters
• /
• 제5권3호
• /
• pp.127-132
• /
• 2004

Chop molding composites and 2D carbon/carbon composites were manufactured by hot press molding method. Phenol resin of novolac type was used for matrix precursor and PAN-based carbon, PAN-based graphite and pitch-based carbon fiber were used for reinforcement and boron oxide was used for oxidation retardant. All of the composites were treated by $2000^{\circ}C$ and $2400^{\circ}C$ graphitization process, respectively. After graphitization process, amount of a boron residue in carbon/carbon composites is much according to irregularity of used raw materials. Under the presence of boron in carbon/carbon composites, catalytic effect of boron was a little at $2000^{\circ}C$ graphitization temperature. However, it was quite at $2400^{\circ}C$ graphitization.

• 열처리공학회지
• /
• 제12권1호
• /
• pp.55-65
• /
• 1999

Graphitization of cementite in high carbon steels at subcritical temperature is reported. We have studied about the effects of Ni in these steels on graphitization. The chemical compositions of the specimens were Fe-(0.54, 0.7)%-C-1.0%Si-0.1%Mn-(0.2~1.0)%Ni. After annealing at $650^{\circ}C$, $680^{\circ}C$ and $700^{\circ}C$ during various time the microstructures and hardness change were observed. In order to recover the initial hardness of high carbon steel, dissolution treatment of graphite was performed at $870^{\circ}C$. In case of 0.7%C steel, graphitization was accelerated rather 1.0%Ni addition steel than 0.2% and 0.54%Ni addition steels but the graphite is coarser. In case of 0.54%C-0.2%Ni steel, graphite particles were distributed relatively homogeniously and finely. Nickel addition promotes graphitization of these steels but makes graphite blocky.

• 열처리공학회지
• /
• 제11권2호
• /
• pp.140-149
• /
• 1998

The graphitization is affected by the addition of small amount of the elements, such as Si, Al, Ni, B, Cr and Mn etc. Boron is well known as the most effective element for the graphitization of cementite in high carbon steels. But a study on quantitative analysis of B effect on the graphitization is few reported. Therefore the effect of boron addition in Fe-0.65%C-1.0%Si-0.5%Mn steels on the graphitization is investigated quantitatively using hardness tester, optical microscope and scanning electron microscope, neutron induced microscopic radiography. The graphitization in high carbon steels is promoted with 0.003~0.005%B addition. But the graphitization in steels which has no boron takes long holding time at $680{\sim}720^{\circ}C$. The hardness of quenched steel containing 0.003%B is higher than that of 0.005%B added steel due to complete dissolution of fine graphites into the austenite. The 0.003%B added high carbon steel graphitized at $680^{\circ}C$ for 25hr is useful steel for the agricultural implements and automobile parts which needed a good formability and high hardness.

• 열처리공학회지
• /
• 제10권2호
• /
• pp.101-108
• /
• 1997

In high carbon steels, the cementite phase is more unstable thermally than graphite, and it can lead to a marked deterioration in the formability. Many studies have been carried out to evaluate the effect of the fundamental elements on the graphitization of cementite in high carbon steels. In this present work, the effect of Mn, Cr addition on graphitization in Fe-0.65%C-1.0%Si steel has been investigated by means of hardness testing, optical microscopy and EPMA. The nucleation of graphite may mostly depend on the dissolution rate of cementite into ferrite and the number of the nucleation sites of graphite. The graphitization was promoted by the addition of 0.1%Mn in high carbon steel, but retarded by more addition than 0.5% of Mn. By the more addition of Cr than 0.1%, the graphitization of high carbon steel was strongly retarded. Because Mn was moderate anti-graphitizer, but Cr was stroug anti-graphitizer.

• Carbon letters
• /
• 제14권1호
• /
• pp.22-26
• /
• 2013

The effects of heat treatment temperature (HTT) of polyacrylonitrile-based carbon fiber (CF) on the mechanical, thermal, and tribological properties of C/C composites were investigated. It was found that HTT (graphitization) of CF affects the thermal conductivity and mechanical and tribological characteristics of C/C composites. Thermal treatment of fibers at temperatures up to $2800^{\circ}C$ led to a decrease of the wear rate and the friction coefficient of C/C composite-based discs from 7.0 to 1.1 ${\mu}m$/stop and from 0.356 to 0.269, respectively. The friction surface morphology and friction mechanism strongly depended on the mechanical properties of the CFs. The relief of the friction surface of composites based on CFs with final graphitization was also modified, compared to that of composites based on initial fibers. This phenomenon could be explained by modification of the abrasive wear resistance of reinforcement fibers and consequently modification of the friction and wearing properties of composites. Correlation of the graphitization temperature with the increased flexural and compressive strength, apparent density, and thermal conductivity of the composites was also demonstrated.

• 한국세라믹학회지
• /
• 제33권7호
• /
• pp.816-822
• /
• 1996

서로 다른 흑연화도를 갖는 furan 수지로 부터 얻어진 무기화합물(SiC, TiO2) 첨가 탄소재료의 산화반응의 흑연구조 의존성에 대하여 살펴보았다. 탄소재료의 산화는 시료의 표면적에 크게 의존하여, 흑연화가 상당히 진행된시료라 할지라도 표면적이 클 때는 살화속도도 빠른 것으로 밝혀졌으며, 단위 중량이 아닌 단위면적당의 산화속도로 바꿔 생각했을 때 흑연화가 진행될 수록 산화반응도 늦어지는 것을 알 수 있었다. 그리고 겉보기 활성화 에너지값으로 부터 생각할 때 흑연(TiO2 첨가시료)과 난층흑연(SiC 첨가시료)이 동일한 반응기구에 의해 산화가 진행되는 것으로 판단되었다. 또한 두종류 이상의 결정구조가 혼재하여 있는 시료의 경우 이들 성분들의 산화속도는 달라 반응의 초기에 흑연으로 결정화된 않은 비정질 탄소 성분이 흑연 성분보다 먼저 선택적으로 산화되는 것을 알 수 있었다.