• Structural Engineering and Mechanics
• /
• 제87권4호
• /
• pp.375-389
• /
• 2023

In many fiber concrete beams with Carbon Fiber Reinforced Polymer (CFRP), debonding occurs between the carbon sheets and the concrete due to the low strength of the bonding resin. A total of 42 fiber concrete beams with a cross-section of 10×10 cm with a span length of 50 cm are fabricated and retrofitted with CFRP and subjected to a 4-point bending test. Graphene Oxide (GO) at 1, 2, and 3 wt% of the resin is used to improve the mechanical properties of the bonding resins, and the effect of length, width, and the number of layers of CFRP and resin material are investigated. The crack pattern, failure mode, and stress-strain curve are analyzed and compared in each case. The results showed that adding GO to polyamine resin could improve the bonding between the resin and the fiber concrete beam. Furthermore, the optimum amount of nanomaterials is equal to 2% by the weight of the resin. Using 2% nanomaterials showed that by increasing the length, width, and number of layers, the bearing and stiffness of fiber concrete beams increased significantly.

• 폴리머
• /
• 제39권3호
• /
• pp.468-474
• /
• 2015

고분자 재료에 전기 전도성을 부여하기 위해 그래핀 기반의 나노필러를 도입하여 전도성 나노복합재료를 제조하였다. 그래핀 나노필러는 폴리스티렌(PS) 입자와 수계 분산이 용이하도록 산화 그래핀(GO) 및 poly(styrene sulfonate)가 도포된 환원된 산화 그래핀(PSS-RGO)을 사용하였다. GO는 흑연으로부터 modified Hummers 방법으로 합성하였으며, PSS-RGO는 GO가 분산된 PSS 용액을 hydrazine monohydrate로 환원시켜 제조하였다. 라텍스 기법으로 제조한 PS/GO 및 PS/PSS-RGO 나노복합재료의 모폴로지, 유변물성 및 전기적 물성을 고찰하였다. GO 및 PSS-RGO 나노필러는 PS 매트릭스 내에 잘 분산된 모폴로지를 보여 주었다. 그래핀 나노필러 함량에 따른 유변학적, 전기적 임계점은 GO가 0.28, 0.51 wt%로 나타났고 PSS-RGO는 0.50, 1.01 wt%로 나타났다. PS/GO 나노복합재료가 우수한 전기 전도도를 보여주는 이유는 성형시의 열처리에 의해 GO가 환원되어 전기적 물성을 부분적으로 회복했기 때문으로 판단된다.

• 한국입자에어로졸학회지
• /
• 제12권4호
• /
• pp.127-134
• /
• 2016

A multiwall carbon nanotube (MWCNT)/graphene (GR) composite was synthesized for an enhanced supercapacitor. Aerosol spray pyrolysis (ASP) was employed to synthesize the MWCNT/GR composites using a colloidal mixture of MWCNT and graphene oxide (GO). The effect of the weight ratio of the MWCNT/GO on the particle properties including the morphology and layered structure were investigated. The morphology of MWCNT/GR composites was generally the shape of a crumpled paper ball, and the average composite size was about $5{\mu}m$. MWCNT were uniformly dispersed in GR sheets and the MWCNT not only increase the basal spacing but also bridge the defects for electron transfer between GR sheets. Thus, it was increasing electrolyte/electrode contact area and facilitating transportation of electrolyte ion and electron in the electrode. Electrochemical data demonstrate that the MWCNT/GR (weight ratio=0.1) composite possesses a specific capacitance of 192 F/g at 0.1 A/g and good rate capability (88% capacity retention at 4 A/g) using two-electrode testing system.

• Computers and Concrete
• /
• 제27권4호
• /
• pp.369-383
• /
• 2021

This article deals with the frequency analysis of viscoelastic sandwich disk with graphene nano-platelets (GPLs) reinforced viscoelastic concrete (GPLRVC) face sheets and honeycomb core. The honeycomb core is made of aluminum due to its low weight and high stiffness. The rule of the mixture and modified Halpin-Tsai model are engaged to provide the effective material constant of the concrete. By employing Hamilton's principle, the governing equations of the structure are derived and solved with the aid of the Generalize Differential Quadrature Method (GDQM). In this paper, viscoelastic properties are modeled according to Kelvin-Voigt viscoelasticity. The deflection as the function of time can be solved by the fourth-order Runge-Kutta numerical method. Afterward, a parametric study is carried out to investigate the effects of the outer to inner radius ratio, hexagonal core angle, thickness to length ratio of the concrete, the weight fraction of GPLs into concrete, and the thickness of honeycomb core to inner radius ratio on the frequency of the viscoelastic sandwich disk with honeycomb core and FG-GPLRVC face sheet.

• Carbon letters
• /
• 제24권
• /
• pp.1-9
• /
• 2017

We studied the basic properties and fabrication of reduced graphene oxide (rGO) prepared using eco-friendly reduction agents in the graphene solution process. Hydrazine is generally used to reduce graphene oxide (GO), which results in polluting emissions as well as fixed nitrogen functional groups on different defects in the graphene sheets. To replace hydrazine, we developed eco-friendly reduction agents with similar or better reducing properties, and selected of them for further analysis. In this study, GO layers were produced from graphite flakes using a modified Hummer's method, and rGO layers were reduced using hydrazine hydrate, L-ascorbic acid, and gluconic acid. We measured the particle sizes and the dispersion stabilities in the rGO dispersed solvents for the three agents and analyzed the structural, electrical, and optical properties of the rGO films. The results showed that the degree of reduction was in the order L-ascorbic acid ${\geq}$ hydrazine > glucose. GO reduced using L-ascorbic acid had a sheet resistance of $121k{\Omega}/sq$, while that reduced using gluconic acid showed worse electrical properties than the other two reduction agents. Therefore, L-ascorbic acid is the most suitable eco-friendly reduction agent that can be substituted for hydrazine.

• 한국표면공학회지
• /
• 제53권5호
• /
• pp.213-218
• /
• 2020

Composite material of the graphene ball (GB) inserted graphene oxide (GO) sheet for a supercapacitor electrode was studied. Chemical vapor deposition (CVD) process used to make GBs on the silicon oxide nanoparticles. The GBs mixed into the GO sheets to make GOGB and reduced it to create a reduced GOGB(RGOGB) composite. The RGOGB composite electrode had a large surface area and improved electrochemical properties. Specific capacitance of the RGBGO composite electrode was higher over 20 times than a pure GO and GOGB electrode in cyclic voltammetry(CV) tests, and the Z' and Z" impedance measured by an electrochemical impedance spectrometry(EIS) also low. So, the RGBGO composite electrode would use effectively to expand a performance of supercapacitor.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.256-259
• /
• 2013

We investigate co-doping effects of conjugated P-N B-N with increasing of N concentration in the graphene sheets using a first principles based on the density functional theory. N doping sites of the graphene consider two possible sites (pyridinic and porphyrin-like). Energy calculation shows that additional doping of B atom in the porphyrin-like N doped graphene ($V+B-N_x$) is hard to form. At the low chemical potential of N, one N atom with additional doping in the graphene ($V+P-N_1$, $P/B-N_1$) has low formation energy on the other hand at high chemical potential of N, high concentration of N ($V+P-N_4$, $P/B-N_3$) in the graphene is governing conformation. From the results of electronic band structure calculation, it is found that $V+P-N_4$ and $P/B-N_3$ cases change the Fermi energy therefore type change is occurred. On the other hand, the cases of $V+P-N_1$ and N+B recover the electronic structure of pristine graphene.

• 멤브레인
• /
• 제27권3호
• /
• pp.216-225
• /
• 2017

원자 수준의 두께를 가지는 그래핀 단일층이 흑연으로부터 박리되어 구현된 이래로, 그래핀은 2차원 소재의 활용 가능성을 연 물질로서 각광받고 있으며, 그래핀 고유의 뛰어난 물리적 특성으로 인하여 활발히 연구되고 있다. 특히 분리막 분야는 그래핀과 산화 그래핀이 활용 가능한 가장 중요한 분야 중의 하나로서, 최근의 다양한 시뮬레이션 연구를 통하여 그 가능성이 입증되고 있다. 그래핀과 산화 그래핀은 원자 수준의 얇은 두께, 뛰어난 기계적 강도, 높은 수준의 내화학성, 기공생성이 가능한 2차원 구조 또는 기체 확산 유로 생성이 가능한 적층 구조 등 분리막 소재로서 매우 유리한 특성들을 보유하고 있음이 밝혀졌다. 본 총설에서는 그래핀과 산화 그래핀의 고유 특성을 기반으로 기체 분리막 분야로의 응용 가능성과 현재까지의 개발 현황 및 향후 전망에 대하여 논하고자 한다.

• Structural Engineering and Mechanics
• /
• 제83권4호
• /
• pp.465-473
• /
• 2022

In this research, a numerical study has been provided for examining the nonlinear stability behaviors of sandwich beams having a cellular core and two face sheets made of nanocomposites. The nonlinear stability behaviors of the sandwich beam having geometrically perfect/imperfect shapes have been studied when it is subjected to a compressive buckling load. The nanocomposite face sheets are made of epoxy reinforced by graphene oxide powders (GOPs). Also, the core has the shape of a honeycomb with regular configuration. Using finite element method based on a higher-order deformation beam element, the system of equations of motions have been solved to derive the stability curves. Several parameters such as face sheet thickness, core wall thickness, graphene oxide amount and boundary conditions have remarkable influences on stability curves of geometrically perfect/imperfect sandwich beams.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2007년도 The 1st International Symposium on Advanced Magnetic Materials
• /
• pp.213.2-213.2
• /
• 2007