• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2001년도 학술발표회 논문집
• /
• pp.75-78
• /
• 2001

• 콘크리트학회지
• /
• 제28권2호
• /
• pp.35-40
• /
• 2016

• 한국건설순환자원학회논문집
• /
• 제8권1호
• /
• pp.39-48
• /
• 2020

본 연구에서는 철과 니켈의 합금강 제조공정에서 발생하는 산업부산물인 페로니켈슬래그를 혼입하여 기존 결합재와의 화학반응 및 성능을 확인하였다. 고로슬래그 미분말과 페로니켈슬래그를 활용하여 시멘트 대비 치환률 50%까지 삼성분계 치환하여 실험을 통해 기초 물성 및 특징을 평가하였다. 실험 결과에 따르면 페로니켈슬래그를 혼입할 시 포졸란 반응이 기여하여 밀실한 내부 공극 및 수화물이 형성되었고, 수화열과 건조 수축 감소 효과도 나타났다. 압축강도는 초기 재령에는 다소 저조한 강도발현을 나타냈으나, 28일 장기재령으로 갈수록 강도 증가가 나타났다. 추후 최적 배합을 도출하여 용도에 맞게 활용할 경우 시멘트 결합재로서의 활용 가능성이 기대된다.

• 한국건설순환자원학회논문집
• /
• 제4권4호
• /
• pp.91-98
• /
• 2009

최근 시멘트 및 골재 등 원재료 값의 상승 및 세계적인 유가 급등으로 인한 운송비의 증가로 레미콘 제조원가는 상승하고 있다. 그러나 레미콘 제조업체들 간의 과다한 경쟁으로 인해 레미콘의 납품 단가는 오히려 낮아지고 있는 실정이다. 이를 극복하기 위한 일환으로 레미콘 제조업체들은 레미콘의 제조원가를 최소한으로 줄이고자 하는 노력 중 하나로 고로슬래그 미분말 및 플라이애시를 혼화재로 사용하는 업체가 증가하고 있다. 그러나 이러한 광물질 혼화재를 사용한 콘크리트의 품질관리에 대한 연구는 미흡한 실정이다. 따라서, 본 연구에서는 고로슬래그 미분말 혼합 콘크리트의 28일 압축강도를 조기에 예측하기 위해 촉진양법을 이용하였다. 고로슬래그 미분말 혼합률 별로 선형회귀분석을 실시하여 추정식을 제시하였고 90%의 신뢰구간을 나타내었다. 또한 실험의 신뢰성을 높이기 위해 모든 배합은 3회 반복하였고, 배합순서는 랜덤추출법을 사용하였다. 이러한 실험결과 촉진양생법에 의한 1일 촉진강도로서 고로슬래그 미분말 혼합 콘크리트의 재령 28일 압축강도를 예측할 수 있는 추정식의 신뢰성을 확인하는 성과를 얻었다.

• International Journal of Concrete Structures and Materials
• /
• 제8권2호
• /
• pp.157-164
• /
• 2014

Ground granulated blast-furnace slag (GGBS) is a green construction material used to produce durable concrete. The secondary pozzolanic reactions can result in reduced pore connectivity; therefore, replacing partial amount of Portland cement (PC) with GGBS can significantly reduce the risk of sulfate attack, alkali-silica reactions and chloride penetration. However, it may also reduce the concrete resistance against carbonation. Due to the time consuming process of concrete carbonation, many researchers have used accelerated carbonation test to shorten the experimental time. However, there are always some uncertainties in the accelerated carbonation test results. Most importantly, the moisture content and moisture profile of the concrete before the carbonation test can significantly affect the test results. In this work, more than 200 samples with various water-cementitious material ratios and various replacement percentages of GGBS were cast. The compressive strength, electrical resistivity, chloride permeability and carbonation tests were conducted. The moisture loss and microstructure of concrete were studied. The partial replacement of PC with GGBS produced considerable improvement on various properties of concrete.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.139-147
• /
• 2018

Due to enhanced construction requirement, ready mixed concrete are being popular day by day. The current study aimed to develop ready mixed concrete using GBFS contained cement and determine its properties of fresh and hardened states. A real scale experiment was set up in a ready mixed plant for measuring workability and compressive strength. The workability was tested after mixing (within 5 minutes), 30, 60, 90, 120 and 150 minutes of the running of bulk carrier. The ready mixed carrier employed spinning motion i.e., rotating around its axis with 20 RPM and running on road with 1km/h speed. The mixing ratio of cement: sand:gravel, water to cement ratio, super plasticizer were, 1:1.73:2.47, 0.40 and 6% of cement, respectively. The chemical composition of raw material was determined using XRF and the properties of cements were measured according to ASTM standards. The experimental results confirm that the cement with composition of 6.89% of GBFS, 4% of Gypsum and 89.11% of clinker showed the good compressive strength and workability of concrete after 150 minutes of the spinning motion in bulk carrier.

• 콘크리트학회지
• /
• 제11권2호
• /
• pp.115-125
• /
• 1999

콘크리트의 품질확보와 문제점 해결방안으로서 20세기 전반까지는 주로 시멘트의 종류를 달리하는 경우가 많았으나, 그 후반기부터는 각종 혼화재료를 사용하여 콘크리트의 결점을 보완하고 각종 요구성능에 부응하는 다양한 품질의 콘크리트를 제조하고 있다. 따라서 이같은 다양한 요구에 부응키 위해서는 혼화재료의 사용이 필수적이므로 본 연구에서는 강도증진 및 수화열 저감목적으로 많이 사용되고 있는 실리카흄, 플라이애쉬, 고로슬래그 미분말 및 농업부산물인 왕겨재의 특성을 규명키 위하여 이들을 혼입한 콘크리트에 대해서 단위결합재량별(300~600kg/$m^3$)로 이들 각각의 혼입률에 따라서 시공성 및 강도특성을 분석한 후 각 혼화재의 성능을 발휘할 수 있는 최소 결합재량과 시공성 및 강도특성이 가장 우수한 최적 혼입률 등을 도출하였다.

• International Journal of Concrete Structures and Materials
• /
• 제18권2E호
• /
• pp.125-132
• /
• 2006

Waste glass has been increasingly used in industrial applications. One shortcoming in the utilization of waste glass for concrete production is that it can cause the concrete to be weakened and cracked due to its expansion by alkali-silica reaction(ASR). This study analyzed the ASR expansion and strength properties of concrete in terms of waste glass color(amber and emerald-green), and industrial by-products(ground granulated blast-furnace slag, fly ash). Specifically, the role of industrial by-products content in reducing the ASR expansion caused by waste glass was analyzed in detail. In addition, the feasibility of using ground glass for its pozzolanic property was also analyzed. The research result revealed that the pessimum size for waste glass was $2.5{\sim}1.2mm$ regardless of the color of waste glass. Moreover, it was found that the smaller the waste glass is than the size of $2.5{\sim}1.2mm$, the less expansion of ASR was. Additionally, the use of waste glass in combination with industrial by-products had an effect of reducing the expansion and strength loss caused by ASR between the alkali in the cement paste and the silica in the waste glass. Finally, ground glass less than 0.075 mm was deemed to be applicable as a pozzolanic material.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.29-36
• /
• 2002

High fluid concrete unlike OPC concrete is made with various material, and the phase of fresh concrete is considerably different. In order to understand fluidity phase and mix properties of high fluid concrete, concrete is required to access as suspension structure which consists of aggregate and paste. The focus of this paper is to analyze the test results and quantify the effect of mix proportions of molar and fineness modulus of ,and on the properties of fresh mortar. The effect of water-binder ratio, sand-binder ration, content; of ggbs (by mass of total cementitious materials), and various contents of water reducing agent on the yield stress and plastic viscosity of the mix is studied. Based on the experimental results, the following conclusion; can be drawn: (1) The mixing time needed (or high fluid mortar was approximately two times more than that of ordinary portland mortar. (2) The fluidity phase of mortar could be explained by yield stress of mix and the fluidity of mortar. (3) As the content of ggbs increased, yield stress of mortar was decreased and plastic viscosity of it was increased. (4) For the high fluid mortar, it was appeared that sand-binder ratio should be below 1.5.

• Advances in concrete construction
• /
• 제9권4호
• /
• pp.345-354
• /
• 2020

Cement is the most significant component in concrete. Large scale manufacturing of cement consumes more energy and release harmful products (Carbon dioxide) into the atmosphere that adversely affect the environment and depletes the natural resources. A lot of research is going on in globally concentrating on the recycling and reuse of waste materials from many industries. A major share of research is focused on finding cementitious materials alternatives to ordinary Portland cement. Many industrial waste by-products such as quartz powder, metakaolin, ground granulated blast furnace slag, silica fume, and fly ash etc. are under investigations for replacement of cement in concrete to minimize greenhouse gases and improve the sustainable construction. In current research, the effects of a new generation, ultra-fine material i.e., alccofine which is obtained from ground granulated blast furnace slag are studied as partial replacement by 25% and with varying amounts of sulfonated naphthalene formaldehyde (i.e., 0.3%, 0.35% and 0.40%) on mechanical, water absorption, thermal and microstructural properties of concrete. The results showed moderate improvement in all concrete properties. Addition of SNF with combination of alccofine showed a significant enhancement in fresh, hardened properties and water absorption test as well as thermal and microstructural properties of concrete.